The 2-d simulation of thick SU-8 photoresist profile after UV lithography is presented.
这篇论文是厚su - 8光刻胶接触式UV光刻后形貌的两维模拟。
The key problem is if the ions upflow can really trigger the substorm onset? A 3-D resistive MHD simulation is carried o.
我们利用三维MHD 方法首次对上行离子流触发的亚暴膨胀相起始过程进行了研究。
Since being set up, the damage function model has successful application in the 1 -D simulation for spallation under impact loading.
从损伤度函数模型建立以来，该模型对平面碰撞层裂问题的一维数值模拟有比较成功的应用。
Material flowing behavior of shell for air bag in extrusion are also analyzed by means of 2-d simulation software of volume deformation.
采用体积成形二维模拟软件分析了安全气囊壳体挤压成形中材料的流动规律。
The model involves modeling of target movements, modeling of 3-d targets, translation of geometry, infrared simulation, scanning and filling and noises simulation, etc.
包括运动模型化、目标模型化、几何变换、红外仿真、扫描填充和噪声仿真几部分。
This paper deals with the effectiveness of H-HA models, D-H models and maximum density-D models of Chinese fir and Masson pine, making use of computerized simulation tests.
用计算机模拟试验的方法，对杉木和马尾松平均树高、平均胸径及最大密度的数学模型的预报有效性进行检验。
For example, an Intelligent Safety Shield feature is a dynamic, 3-D simulation of machine components, tooling, fixturing and workpiece all displayed on the CNC control screen.
例如，智能安全盾功能是一个动态的，三维仿真的机械部件，模具，夹具和工件都显示在CNC控制屏幕上。
The A/D decoding circuit received simulation signal form measurement port and converted the signals into data signals which displayed by 7-segment, then signals were sent to data latch.
译码电路接收测量端模拟信号，转化为7段显示的数字信号，发送到数据锁存器上。
It describes the fuzzy PID-type controller design of the alkali boiler water level, the build of 2-d control table, the realization of the computer design and simulation of the controller.
以碱回收炉的水位控制为例具体论述调整系统控制量的模糊pid控制器的设计、2- D控制表的建立、以及控制器计算机设计与仿真的实现。
By 3 D simulation of the induced electric field of two kinds of coils, the effect of magnetic stimulation can be demonstrated and the factors influencing stimulating focality and depth are identified.
通过两种磁线圈电场强度三维分布的仿真，确定了磁刺激的效果和影响磁刺激聚焦性和深度的因素。
And then it introduces synthetic aperture radar system model, the original echo of the simulation methods and R-D imaging algorithm.
然后建立了合成孔径雷达的系统模型，介绍了原始回波的模拟方法和R - D成像算法。
D parametric modeling design and precise numerical flow simulation are realized and the effective and practical research tools for design and improvement of the ports are provided.
实现了参数化的三维造型设计以及高精度的流动数值模拟，为气道的设计与改进提供了高效实用的研究手段。
Numerical simulation results show that the optimal preform H/D dimension thus obtained can greatly reduce hammering times and die wear.
数值模拟结果表明获得的预成形H/D最佳尺寸可明显减少模锻锤击次数和模具磨损。
Through the prediction simulation to 7.8 earthquake of Tangshan in 1976, it is shown that the D-S theory is more efficient and superiority in earthquake prediction.
通过对1976年唐山7.8级地震预报的仿真，结果表明：D - S理论在地震预报中具有一定的有效性和优越性。
Finally, by using this new method, flow in a 2-d lid driven cavity, flow around a circular cylinder, and flow simulation around NACA0012 airfoil with different Reynolds Numbers are performed.
最后，针对二维驱动空腔流、圆柱绕流及二维naca0012翼型在不同雷诺数的条件下，用新提出的方法进行了数值模拟。
The result of the simulation indicates that the mufti-sensor information amalgamation techniques based on D-S evidential theory is an effective method to realize the TI.
文中在简单介绍了多传感器信息融合技术的概念之后，详细阐明了D-S证据推理的原理及其应用于战场目标识别的方法，并进行了仿真处理。
Considering the real execution of a two-link robotic manipulator arm, D-type ILC can't achieve the effects of simulation results.
考虑到两连杆机械臂的实际执行过程，D型迭代学习控制并不能达到仿真结果中的效果。
With the analysis of R-D algorithm, the relationship between the frequency of radar, the signal frequency width and the squint angle is deduced. The result is identified by computer simulation.
该文通过对R-D成像方法的分析，推导了在R-D成像方法下雷达工作频率，信号带宽与成像角之间的关系，并用计算机仿真进行了验证。
Engineers use the tools to conduct 3-D electromagnetic simulations and RF circuit simulation for antenna, GPS, and various wireless design applications.
工程师可以使用工具来进行天线，全球定位系统，以及各种无线应用的3 - D电磁模拟和RF电路仿真。
The 3-D dynamic thermal simulation test of putting small-size coke around inside wall of BF has been carried out in the laboratory.
在实验室做了边缘布加小粒焦的三维动态热模拟实验研究。
This paper firstly introduces a numerical simulation model of Pseudo-3-D seepage system and presents a simultaneous synchronous solution for it.
本文首先介绍了“准三维”渗流系统的数值模拟模型，并为该模型提出了一种联立同步解法。
Video collection part adopts simulation PAL video camera, cooperate with precision the A/D converter get digital image.
视频采集部分采用模拟PAL制摄像头，配合高精度视频A/D转换器得到数字图像。
To acquire fused 3-D images pixel level fusion is performed by the evidential theory to integrate infrared CT simulation into ultrasonic CT.
在像素层上，结合红外CT模拟与超声CT算法，采用证据理论方法实现了对三维图像的融合重构；
Furthermore, the selection of the fuel consumption sensor, the frequency collection circuit, the simulation processing circuit, A/D transmitter, memory circuit, SCM, etc was introduced.
由于需要采集多个柴油机的燃油消耗参数，在硬件设计中采用模拟开关对采集通道进行切换。
A fire control simulation system for flight simulator based on MIL-D-1553B bus consists of a fire control simulation computer, a fire control simulation console and power supply.
基于1553B总线的载机火控模拟系统，由火控模拟计算机、模拟发控台和电源组成。
The characters of PHSC pipe pile is introduced simply in this paper, and its bearing capacity and load transfer behavior are analyzed by 3-D numerical simulation.
在现场试验的基础上，对预应力高强度混凝土管桩单桩承载力荷载传递特性进行了三维数值模拟分析。
The simulation and experimental results are presented, verifying that the designed DSSC has good performance of power flow control, and configuration of DSSC is adaptable for D-FACTS.
仿真和实验表明，该补偿器具有良好的潮流控制作用，结构特点满足分布式FACTS需要。
This paper mainly describes the amplitude and phase errors caused by zero-order holder and the error caused by finite word length of D/A, and computer simulation test of D/A error is also introuced.
针对零阶保持器引起的幅度误差和相位误差，以及D/A转换器有限字长引起的误差进行了较为详细的分析，并进行了D/A误差仿真试验。
An iterative method numerical simulation of 3-D flow-field was put forward, based on the interaction between flow-field and turbine rotational speed.
根据侧进气涡轮电机的涡轮转速与流场相互影响的特点，文中提出一种将三维流场数值模拟与电机动力学分析相结合的迭代模拟计算方法。
The load-deflection characteristics of inclined excavated foundations of transmission lines in homogeneous soil under lateral loads are analyzed using a 3-D numerical simulation model.
通过数值模拟，分析输电线路倾斜掏挖式基础在水平荷载作用下的荷载挠度特性。
应用推荐