By 3 D simulation of the induced electric field of two kinds of coils, the effect of magnetic stimulation can be demonstrated and the factors influencing stimulating focality and depth are identified.
通过两种磁线圈电场强度三维分布的仿真，确定了磁刺激的效果和影响磁刺激聚焦性和深度的因素。
D parametric modeling design and precise numerical flow simulation are realized and the effective and practical research tools for design and improvement of the ports are provided.
实现了参数化的三维造型设计以及高精度的流动数值模拟，为气道的设计与改进提供了高效实用的研究手段。
Numerical simulation results show that the optimal preform H/D dimension thus obtained can greatly reduce hammering times and die wear.
数值模拟结果表明获得的预成形H/D最佳尺寸可明显减少模锻锤击次数和模具磨损。
Reconstructing 3-D shape is realized. The result of computer simulation shows that it is a feasible way of image data compression transmission.
计算机模拟结果表明这是一种可行的图象数据的压缩传输方式。
Finally, by using this new method, flow in a 2-d lid driven cavity, flow around a circular cylinder, and flow simulation around NACA0012 airfoil with different Reynolds Numbers are performed.
最后，针对二维驱动空腔流、圆柱绕流及二维naca0012翼型在不同雷诺数的条件下，用新提出的方法进行了数值模拟。
VR is a computer simulation that USES 3-d graphics and devices to provide an interactive visual experience.
虚拟实境是一个由电脑模拟产生的互动视觉经验。
Wang Haoliang. 2014. three dimensional numerical simulation of discharge characteristics of thunderstorm clouds [d]. Nanjing: Nanjing University of Information Science and Technology.
王昊亮。2014。雷暴云放电特征的三维数值模拟研究[D]。南京：南京信息工程大学。
It is indicated by a numerical simulation of the cantilever flexible shear structural damage identification that only low order modal parameters are needed to identify effectively a structural d...
通过一个悬臂弯剪型结构损伤识别的数值模拟表明，只需低阶模态参数就可有效地识别结构损伤。
A fire control simulation system for flight simulator based on MIL-D-1553B bus consists of a fire control simulation computer, a fire control simulation console and power supply.
基于1553B总线的载机火控模拟系统，由火控模拟计算机、模拟发控台和电源组成。
The model involves modeling of target movements, modeling of 3-d targets, translation of geometry, infrared simulation, scanning and filling and noises simulation, etc.
包括运动模型化、目标模型化、几何变换、红外仿真、扫描填充和噪声仿真几部分。
The load-deflection characteristics of inclined excavated foundations of transmission lines in homogeneous soil under lateral loads are analyzed using a 3-D numerical simulation model.
通过数值模拟，分析输电线路倾斜掏挖式基础在水平荷载作用下的荷载挠度特性。
Since being set up, the damage function model has successful application in the 1 -D simulation for spallation under impact loading.
从损伤度函数模型建立以来，该模型对平面碰撞层裂问题的一维数值模拟有比较成功的应用。
And then it introduces synthetic aperture radar system model, the original echo of the simulation methods and R-D imaging algorithm.
然后建立了合成孔径雷达的系统模型，介绍了原始回波的模拟方法和R - D成像算法。
The simulation and experimental results are presented, verifying that the designed DSSC has good performance of power flow control, and configuration of DSSC is adaptable for D-FACTS.
仿真和实验表明，该补偿器具有良好的潮流控制作用，结构特点满足分布式FACTS需要。
Engineers use the tools to conduct 3-D electromagnetic simulations and RF circuit simulation for antenna, GPS, and various wireless design applications.
工程师可以使用工具来进行天线，全球定位系统，以及各种无线应用的3 - D电磁模拟和RF电路仿真。
The recovery rate by WAG injection in stratified condensate gas reservoirs is higher than that by cyclic gas injection according to the simulation study by use of stratified 2-D sectional model.
通过层状二维剖面模型的模拟研究，证明了在层状凝析气藏中水气交替注入的采收率比循环注气的采收率高。
To acquire fused 3-D images pixel level fusion is performed by the evidential theory to integrate infrared CT simulation into ultrasonic CT.
在像素层上，结合红外CT模拟与超声CT算法，采用证据理论方法实现了对三维图像的融合重构；
Considering the real execution of a two-link robotic manipulator arm, D-type ILC can't achieve the effects of simulation results.
考虑到两连杆机械臂的实际执行过程，D型迭代学习控制并不能达到仿真结果中的效果。
The 3-D dynamic thermal simulation test of putting small-size coke around inside wall of BF has been carried out in the laboratory.
在实验室做了边缘布加小粒焦的三维动态热模拟实验研究。
The simulated data tallies with the test data, and the feasibility of the 3-d numerical simulation is verified for fan pneumatic design.
模拟结果与试验结果基本吻合，验证了三维数值模拟对于风机气动设计的可行性。
Some electromagnetic parameters in soft contact continuous casting mold of billet were analyzed through 3-d FEM numerical simulation method.
通过有限元法三维数值模拟，对方坯连铸软接触结晶器系统中的电磁参数进行了计算。
The simulation of 3-d random waves plays an important role in studying the intrinsic characteristic of wave and its impacts on the ships.
三维随机海浪的模拟对于研究海浪的本质特征以及海浪对船舶结构物的作用等问题有重要意义。
The distribution of shadowgraph intensities in uniform traveling wave is investigated by means of numerical simulation of 2-d equations of hydrodynamics.
本文通过二维流体力学基本方程的数值模拟，探讨了均匀行进波状态时的阴影强度分布特性。
This paper firstly introduces a numerical simulation model of Pseudo-3-D seepage system and presents a simultaneous synchronous solution for it.
本文首先介绍了“准三维”渗流系统的数值模拟模型，并为该模型提出了一种联立同步解法。
A numerical simulation is presented for 3-d filling progress of engine cylinder head casting.
应用数值模拟的方法研究了发动机缸盖铸造的三维充型过程。
Material flowing behavior of shell for air bag in extrusion are also analyzed by means of 2-d simulation software of volume deformation.
采用体积成形二维模拟软件分析了安全气囊壳体挤压成形中材料的流动规律。
A 2-d tidal flow mathematical model of Xinghua Bay based on irregular triangular grid finite difference method was set up and numerical simulation of tidal flow field was carried out.
建立了基于不规则三角形网格有限差分法的兴化湾二维潮流数学模型，对兴化湾潮流场进行了数值模拟。
The 3-d pump model cannot only be used in assembly, intervene inspection and process simulation, but also provide computational model for FEA and CFD.
泵的三维模型不但可以用于零件装配、干涉检查、加工模拟，而且可以为有限元分析(FEA)和计算流体动力学(CFD)分析提供计算模型。
The flow characteristics, eddy structure and energy dissipated mechanism of multi-horizontal submerged jets (MHSJ) are studied by means of 3-d numerical simulation.
采用三维数值模拟，研究了多股多层水平淹没射流的流动特性、漩涡结构和消能机理。
The flow characteristics, eddy structure and energy dissipated mechanism of multi-horizontal submerged jets (MHSJ) are studied by means of 3-d numerical simulation.
采用三维数值模拟，研究了多股多层水平淹没射流的流动特性、漩涡结构和消能机理。
应用推荐