Through measuring cylindrical section and surface of gauge block, this system is viable to measure free-form surface and high-reflective metallic surface.
对圆柱正截面和量块表面的测量试验验证了该测量系统对自由曲面和金属强反射表面测量的可行性。
The dynamic equations for the coupling system of cylindrical tank partially filled with liquid are established under horizontal excitation in micro-gravity environment.
以一种新的方法建立了在微重力环境、横向激励下圆柱贮箱液固耦合系统的动力学方程。
The fluid flow characteristic in cylindrical generator and conic generator of a new solar absorption refrigeration system is simulated using FLUENT software.
对圆柱形和圆锥形太阳能吸收式制冷系统涡旋发生器内流体流动特性进行了数值模拟。
By using the characteristics, the combination of two Hooke's joints with cylindrical gear mechanisms forms the driving system of a differential velocity vane pump.
利用这一特性，把两个万向节机构和圆柱齿轮机构组合形成了叶片差速泵的驱动系统。
The results show that the system stability is directly influenced by the radial clearance of cylindrical roller bearing.
结果表明：圆柱滚子轴承的径向游隙直接影响着滚动轴承-双转子系统的稳定性。
The system of stiffness test analysis is created by analyzing the shapes and forming processes of tractor body panels, of which based on cylindrical shallow shells and spherical shells.
通过分析拖拉机车身及其冲压成形的特点，结合柱面扁壳及球面扁壳件，建立一套扁壳类零件刚度的试验分析系统。
ZEMAX software is used for optical ray tracking of the system to get images after cylindrical lens.
利用ZEMAX光学软件对系统进行光线追迹获得光束经过柱面镜后的聚焦情况。
With the help of numerical analysis of three-dimension ray tracing, the coupling system of cylindrical lens for small-size LD stacks was studied.
利用三维光线追迹的方法，对小型激光二极管面阵的柱透镜耦合系统进行数值模拟研究。
The cylindrical lens ACTS as an important role in the coupled optical system of DPL.
在二极管泵浦固体激光器耦合光学系统中，柱面透镜起着非常重要的作用。
This system can not only support the algorithm based on homography matrix, but also support automated panoramic mosaicing method based on cylindrical coordinates.
该系统支持基于单应矩阵的算法和基于柱面坐标的全自动全景拼图算法。
In the paper, a SFRC (Steel Fibre Reinforced Concrete) cylindrical thin shell is designed and fabricated and its stability behaviors arc tested with a specially-made loading lever-system.
本文设计创作了一个钢纤维混凝土圆柱薄壳，采用一套特制的杠杆加载体系对其稳定性能进行了测试。
This paper proposes a research of NC machining system for cylindrical CAM based PC by the tool of VC, while hardware and software of the NC system are described in this paper.
介绍一种基于PC，用VC语言开发的圆柱凸轮数控加工系统，并对该数控系统的硬件及软件设计进行了阐述。
The stiffness of the polar axis' hydrostatic oil pads system in three directions was represented by the stiffness value of a single oil pad in two types of cylindrical and spherical journal.
用单油垫的油膜刚度值来表示柱面和球面轴颈两种极轴静压支承系统三个方向的刚度。
FEM formula in the cylindrical coordinates system is derived and the methods of dealing with the periodic symmetric boundary coordinates are given.
具体推导了柱坐标下的有限元列式，并给出了周期对称边界条件的处理方法。
First, free vibration in an infinite cylindrical shell-fluid coupled system subjected to hydrostatic pressure is considered.
文中首先以一无限长圆柱壳与流场的耦合系统的自由振动为研究对象。
The CAPP system for cylindrical turning is developed based on expert system integrated with an artificial neural network.
阐述了如何结合专家系统和人工神经网络技术来开发外圆车削加工的计算机辅助工艺系统。
In this paper, the precise measuring system for cylindrical cotter with no - contact is introduced.
介绍了圆柱销的无接触精密检测系统，阐述了其光学系统、信号处理系统的工作原理。
The paper present a new measuring method and system structure that can detect cylindrical miror radius.
本文介绍一种测量柱面镜曲率半径的基本原理和检测系统结构。
The problem of a cylindrical interface crack is reduced to a system of singular integral equations with the aid of two unknown dislocation functions at the interface crack surface.
以裂纹面上的位错函数为未知量将圆柱型界面裂纹问题化成一组奇异积分方程的求解问题。
Based on the modified principle of Complementary energy, a hybrid stress shell element is formulated in the cylindrical coordinate system.
本文基本修正的余能原理，在圆柱座标系内，提出了一种圆柱块杂交应力单元。
Meanwhile the processes of cylindrical housing have been simulated by the system, which indicate that the given techniques and software are feasible.
并以筒形机匣精锻成形为例对金属体积形成过程进行了模拟，计算结果表明所提出的方法和软件系统是可靠的。
For surface point measurement of large scale rotary object, a system based on circular cylindrical coordinate measurement is developed.
针对大型回转体型面测量问题，根据柱坐标机的测量原理，研制了大尺寸回转体型面点坐标及形心轴线测量系统。
The new whipstock system is mainly comprised of cylindrical case, localizer, spiral rotating sleeve, whipstock and deflecting tools.
这种转向系统主要由圆筒式壳体、定位器、螺旋转套、斜向器和造斜组合钻具等组成。
Numerical examples show that FHT is a useful fast algorithm to simulate the beam propagation through a large high power laser amplifier system with cylindrical symmetry.
数值计算例表明，用快速汉克尔变换来模拟柱对称大型高功率激光放大系统中的光传输时，是一种非常有用的、快速的算法。
In the part of vision system design, the hardware platform is composed of linear array light, cylindrical lens and linear array image sensor, then the algorithm of circle fitting method is carried on.
在视觉系统的设计中，采用线阵光源、柱面透镜和线阵图像传感器设计了视觉系统的硬件平台，并进行了圆拟合算法的分析。
In this paper, the process to develop and apply the expert system for cylindrical building blasting demolition.
介绍了筒形建筑物爆破拆除专家系统的开发与应用。
The error estimation of rational cubic spline with linear denominators is given, and then the interpolation of a kind of space closed curves under cylindrical coordinate system is investigated.
给出了具有线性分母的有理三次样条函数的误差估计，并在柱面坐标系下对一类空间闭曲线的插值问题进行了研究；
In this paper, the cylindrical gear decelerator is regarded as a repairable system for many faults containing some unrepairable elements.
本文将圆柱齿轮减速器看作一个由不可修复零件组成，具有多种故障的可修复系统。
Approximate analytical solutions of wave function and energy of vortex in the cylindrical coordinates system are obtained for the near-ideal Bose gases at zero temperature.
在柱坐标系中，求出了绝对零度情况下近理想玻色气体涡旋态的波函数和能量的近似解析形式。
Approximate analytical solutions of wave function and energy of vortex in the cylindrical coordinates system are obtained for the near-ideal Bose gases at zero temperature.
在柱坐标系中，求出了绝对零度情况下近理想玻色气体涡旋态的波函数和能量的近似解析形式。
应用推荐