The magnet has a conical structure or cylindrical structure.
所述磁石由锥状或柱状结构组成。
The symmetrical bi-cylindrical structure is a closed shell composed by two unclosed arch shell.
该结构是由两个对称非闭合大弧度圆弧横截面柱壳对接而成的闭合柱壳结构（简称“双圆弧柱壳”）；
This paper deals with the interaction of shock wave and cylindrical structure in nonlinear soil.
本文研究了非线性弹性岩土中冲击波与圆柱结构动力相互作用问题。
The engineering geology, large bottomless cylindrical structure, construction method and displacement analysis for Nansha Wharf are introduced.
文章介绍南沙码头的工程地质，无底大圆筒结构、施工方法、位移分析；
Experiments of the initiation capacity of the new structure and that of the conventional cylindrical structure were made through steel block method.
利用轴向钢凹实验方法对新结构传爆药柱与常规圆柱形传爆药柱的起爆威力进行了对比实验。
The stability and wave overtopping rate of 3 kinds of revetments (sloping, big step and cylindrical structure types) are studied by using sectional model test.
利用断面物理模型试验，对3种结构形式(斜坡段、大台阶段、圆筒段)的护岸的稳定性和越浪量进行了研究。
Steel cylindrical structure used as wharf and breakwater foundation has good fore-prospect in water transport engineering above all in muddy coast of Bohai Bay.
钢箱筒结构在水运工程中尤其是渤海湾淤泥质海岸作为码头和防波堤结构基础拥有很好的应用前景。
This paper gives a method for analysing and computing the response of a multiple -layered cylindrical structure to impulsive waves in an infinite elastic medium.
本文给出了一种分析计算无限弹性介质中多层园柱结构对脉冲波的响应的方法。
The contact pretension between the layers of cylindrical structure concerns the non-linearity of geometry and material, as well as the influence of interface friction.
多层圆柱结构的接触预紧问题，涉及到几何非线性和材料非线性以及接触面上摩擦力的影响。
The inner earth pressure of buried cylindrical structure was measured by model test. The variations of inner earth pressure during overturning of cylinder are analyzed.
采用模型试验实测圆筒结构筒内土压力，并对圆筒在倾覆过程中筒内土压力的变化规律进行探讨。
Character and action principle of steel cylindrical structure is presented in this paper, which is first applied successfully in wharf and breakwater foundation taking place of rubble bed.
结合钢箱筒结构取代抛石基床作为码头和防波堤基础首次在工程中成功应用的实践，论述了钢箱筒结构特点和作用机理。
The computed results of FEA agree well with that of model test. The soil pressure and skin friction distributions on cylindrical structure are discussed in detail on the different conditions.
针对现有试验情况，对于不同的基础垫层、不同的圆筒内径及筒内不同的填土条件，进行了分析比较。
We have used the CYLINDRICAL gear transmission ratio of small, large, heavy structure.
我们常用的圆柱齿轮传动比小，体积大、结构笨重。
From the sealing structure, it is similar to multi - layer cylindrical wall.
从其结构上看，它相当于多层圆筒壁的传热。
These Spaces are contained within a lightweight steel and timber structure, which is supported by cylindrical columns.
这些空间包含在轻量级的钢和木材结构之中，它们由圆柱支撑。
Structure can be analyzed and designed by using the axisymmetrical cylindrical shell theory with moment. A series of stress strain and displacement tests are carried out in situ construction.
利用轴对称圆柱壳有矩理论进行结构分析、设计，并在施工现场进行了一系列应力、应变和变形测试。
By improving steel material quality, adopting plastic cage, improving rib structure and using crowned rollers, the life and performance of cylindrical roller bearing can be largely increased.
经改善钢材质量、采用塑料保持架、改进挡边结构及凸度滚子的应用，可使圆柱滚子轴承的寿命和性能大幅度提高。
It can be predicted that the cylindrical shell structure is better than the plane structure in reducing welding residual stress through local loading.
因此可以预见，对于应用局部加载降低结构体焊接残余应力，柱壳结构要比平板结构效果更好。
The structure property, load distribution, selection principle, application scope and points for attention of cylindrical roller bearing used on surface-grinding machine were analyzed.
分析了使用在平面磨床上的圆柱滚子结构、载荷分布、选用原则、使用范围及注意事项。
The change-shaped cage is a new structure of pressed cages for E-type single row cylindrical rolling bearings.
变形保持架是一种加强型单列圆柱滚子轴承冲压保持架新结构。
This paper presents an acoustic structure model of free—flooded cylindrical transducer installed with holed end-caps.
提出带孔盖板的自由液浸式环氧灌注的圆柱管形换能器声学结构模型。
The shallow cylindrical shell is a typical type of structure of aircraft.
圆柱形扁壳是飞行器的常见结构形式。
The article studies and analyzes the dynamic structure of wheel head of cylindrical grinder, integrated parameters are considered as vibrating factors effecting the wheel spindle flexibility.
本文用结构动力学的分析方法对外圆磨床砂轮架进行分析研究，将其取为具有集中参数且计及砂轮主轴柔度的四自由度振动系统。
We want to control the radial rigidity by adjusted the structural parameter, so that the mechanical capability of the new structure would be similar to cylindrical shell.
设想通过调整结构参数来控制连结点处径向刚度，使该结构实现对完整圆柱壳力学性能的模拟。
The cylindrical shell, reinforced with non-uniform circular ring-frames, is a new structure of submersible pressure hulls.
本文应用能量法推导了一种新型的潜水器耐压壳结构——非匀加肋圆柱壳总失稳压力的计算公式。
The scaling of the longitudinal and transverse velocity structure functions is studied experimentally for turbulent jet and cylindrical wake flow.
实验测量了射流与圆柱尾流纵、横向的湍流速度脉动，计算了这两种方向的湍流速度结构函数的标度规律。
This paper presents a cleaning machine used in the large flat cylindrical barn, e. g. working principle and structure of the spiral bam cleaning machine.
介绍了一种大型平底圆筒仓清仓作业机械，即螺旋清仓机的工作原理及结构。
In this article, structure optimization and analysis of a cylindrical pressure-resisting hull of submersible vessel are discussed.
本文讨论了潜艇圆筒形耐压壳体结构的分析与优化。
The paper present a new measuring method and system structure that can detect cylindrical miror radius.
本文介绍一种测量柱面镜曲率半径的基本原理和检测系统结构。
The paper present a new measuring method and system structure that can detect cylindrical miror radius.
本文介绍一种测量柱面镜曲率半径的基本原理和检测系统结构。
应用推荐