Through measuring cylindrical section and surface of gauge block, this system is viable to measure free-form surface and high-reflective metallic sur…
对圆柱正截面和量块表面的测量试验验证了该测量系统对自由曲面和金属强反射表面测量的可行性。
Through measuring cylindrical section and surface of gauge block, this system is viable to measure free-form surface and high-reflective metallic surface.
对圆柱正截面和量块表面的测量试验验证了该测量系统对自由曲面和金属强反射表面测量的可行性。
In each cylindrical section (measuring cylinder) coaxial with the datum axis a, the section line shall be contained between two circles 0.1 apart and perpendicular to the datum axis a.
在每一个与基准轴a同轴的圆柱面内(测量圆柱)，该截面线应包含和基准轴相距0.1两个圆圈之间。
The recommendation values of the matching coefficient of the separation spaces and the length of the cylindrical section weere proposed for the hydrocyclones in different technological situations.
最后给出了适应不同场合要求的水力旋流器的最佳分离空间匹配系数和圆筒段长度推荐值。
Packaging of winding wires. Part 2: cylindrical barreled delivery spools. Section 2: specification for returnable spools made from thermoplastic material.
绕组线的封装。第2部分：圆桶形输出线轴。第2节：由热塑性材料制成的可回收使用的绕线轴规范。
Packaging of windings wires. Part 2: cylindrical barrelled delivery spools. Section 3: specification for non - returnable spools made from thermoplastic material.
绕组线的封装。第2部分：圆桶形输出线轴。第3节：由热塑性材料制成的不能回收使用的绕线轴规范。
In this way, code NU2308 is obtained for a cylindrical roller bearing with a 40 mm bore diameter (Section 1.6).
用这种方法，获得了NU2308为代码的孔直径40毫米的圆柱滚子轴承(16节)。
In this paper, a new method to solve the electromagnetic shielding problems of a thin cylindrical shell of arbitrary cross section is presented.
本文给出了求解任意横截面柱形薄壳体电磁屏蔽问题的一种新方法。
Critical pressures of the cylindrical Shells stiffened by rings with semi-torus section and by circular tube are calculated and compared.
算例表明，在消耗相同材料的情况下，半圆环加肋圆柱壳具有较好的抗水压性能；
The strength calculation of ring-stiffened cylindrical shell of oval cross section under uniformly-distributed external pressure is a complicated problem in mechanics.
均布外压下带肋椭元柱壳的强度计算是一个比较复杂的力学课题。
According to the tapered section assumption, this paper presents a method for calculating the local stress of a hollow cylindrical shaft with fillets under tension.
根据锥形截面假设，探讨了一种计算具有圆角的空心圆轴拉伸时局部应力的方法。
The position of the least square center for a cross section in the absolute coordinate system is an important factor that affects cylindrical form errors.
截面最小二乘圆心在绝对坐标系内的位置是影响圆柱度形状误差大小的重要因素。
Cylindrical worm with are shaft section is used in circular tooth and cylindrical worm speed reducer.
圆弧齿圆柱蜗杆减速器采用轴截面为圆弧形的圆柱蜗杆。
The shielded rectangular cross section slab line with cylindrical inner conductors is of great importance to microwave engineering and design.
由多根圆柱内导体和矩形外导体所组成的屏蔽矩形板线是电磁工程中一类重要的传输线。
According to the approximation of the velocity profile of turbulent flow in cylindrical pipes, flow rate measurement based upon the maximum velocity of circular cross-section is proposed.
根据已知圆管紊流流速分布的近似模地，研究了使用管道轴线处的最大流速测量流量的方法。
A clothoid curve is used with its fine feature for the shape of transition section between spherical head and cylindrical shell of pressure vessel.
利用回旋曲线的优良特性，将其做为压力容器部分半球形封头与圆柱筒体之间的过渡曲线，实现了在连接边缘上无附加边缘应力的光滑连接。
A cylindrical pipe is more expensive than a plate. It is more costly if its section is polygonal.
同时，圆管比起板材价格较昂贵，假如用板材制作，还可制成不同截面的多边形管子。
A cylindrical pipe is more expensive than a plate. It is more costly if its section is polygonal.
同时，圆管比起板材价格较昂贵，假如用板材制作，还可制成不同截面的多边形管子。
应用推荐