A new numerical computing method suitable for all kinds of cylindrical worm gearing is proposed.
提出一种新的计算圆柱蜗杆副啮合的数值计算方法。
The astigmatic cavities bounded by crossed cylindrical mirrors with a piece of medium is studied by using matrix optics method.
本文用矩阵光学的方法研究了内含介质的正交柱面一柱面镜象散腔。
This method can be extended to deduce the solving equation for other hob blade curve of cylindrical worm.
该方法可以推广到其它圆柱蜗杆滚刀的刃廓曲线求解公式的推导。
Based on the variational principle, the dynamic responses of flexible cylindrical liquid storage tanks, excited seismically have been analyzed by the finite element method.
本文根据变分原理，利用有限单元法分析在水平地震运动作用下圆柱形弹性储液罐的动力反应。
Along with the technical progress, the traditional spatial CAM design and the manufacture method already could not adapt Gao Jing, the complex cylindrical CAM design and the manufacture.
随着科技的进步，传统的空间凸轮设计和制造方法已经不能适应高精、复杂圆柱凸轮的设计和制造。
The authors present a method for designing and manufacturing the cylindrical compressible spring of mini-piston.
介绍一种微型活塞回位圆柱压缩弹簧的设计与制造方法。
This paper analyses several methods of cylindrical measures, based on their advantages and disadvantages, adopt the absolute measure's method in cylinder as the basic theory.
在分析了几种柱面测量方法优缺点的基础上，选用柱面绝对检验方法作为测量柱面的理论基础。
This paper introduces the method of checking cylindrical indexing cam contour with cam check meter of straight head.
介绍了用直动测头凸轮检测仪检测圆柱分度凸轮廓面的方法。
The dynamic problem of constrained layer damping (CLD) cylindrical shell is investigated by the distributed parameter transfer function method.
采用分布参数传递函数方法对约束层阻尼（CLD）圆柱壳进行了动力学分析。
The establishment of variation-principle is of benefit to deriving the finite element method or semi-analytical solution to the cylindrical shell static-dynamical problems of piezoelectric materials.
变分原理的建立将有利于压电材料圆柱壳静力学和动力学问题的有限元方法或半解析法的推导。
Research is carried out on weld groove machining technology of cylindrical duct outlet for barrel compressor, the effective method of solving the problem is put forward.
对筒型压缩机的圆柱形出风管焊接坡口加工工艺进行了探讨，提出了解决该问题的有效方法。
The method most used on clean, fairly uniform formations utilizes small cylindrical samples, perm plugs.
对含泥很少、相当均质的岩层最常用的方法是利用小圆柱体泼姆塞样品。
The phase-space finite element method is applied to the multigroup neutron transport equation in cylindrical critical systems.
本文采用相空间有限元方法求解了柱形临界多群中子输运问题。
This research provides the theoretical basis for the further crack detection in cylindrical shells based on the vibrational power flow method.
文中的研究为基于振动功率流方法识别圆柱壳表面损伤提供了理论基础。
The spline function method of lines is used in analyzing nonlinear problems of cylindrical shells.
采用样条函数线法分析了圆柱壳及具有封闭截面壳体的几何非线性问题。
Finite element method was used to analyze the J integral evaluation method for a cylindrical specimen with deep circumferential crack under axial or torsional load.
通过有限元解析方法分别研究了轴向或扭转载荷下带环状裂纹圆棒试样的J积分的评价方法。
According to this method, a half infinite medium located in cylindrical coordinate system is made discrete by adopting unequal interval mesh.
此法采用不等间隔的网格，将置于柱坐标系中的半无限介质进行离散化。
On the basis of theory of fuzzy probability, a preliminary discussion is carried out on the predictive method of stability on cylindrical spiral compression spring.
根据模糊概率理论，对圆柱形螺旋压缩弹簧稳定性的模糊概率预测方法进行了探讨，并给出了实例。
For accurately obtaining the stress distributions of large oil storage tanks shell, an analytical method for solving the long-short cylindrical shells was proposed.
为准确获得大型石油储罐的壁板应力分布，提出了一种长-短圆柱壳解析方法。
Method for connecting cylindrical member to engagement member, cylindrical member, process cartridge and image forming apparatus.
把圆柱构件与啮合构件连接的方法，圆柱构件，制版机芯及成象设备。
In even magnetic field, the degeneracy of two gauges is calculated when magnetic field is confined in a cylindrical domain. The solution method of Schrdinger equation is introduced.
在均匀磁场中，计算两种规范下，磁场被限制在一个柱体的区域的简并度，说明了薛定谔方程的求解方法。
This paper discusses a method of the optimum-design of the cylindrical helical compression springs used in fuzes.
本文讨论了引信用圆柱螺旋压缩弹簧的优化设计方法。
A set of practical calculation method of drawing technology of flange cylindrical parts are summed up, which is useful for drawing calculation of flange cylindrical parts.
对有凸缘圆筒形件的拉深工艺计算总结出了一套实用的计算方法，对从事有凸缘圆筒形件的拉深计算提供一定的参考价值。
This system can not only support the algorithm based on homography matrix, but also support automated panoramic mosaicing method based on cylindrical coordinates.
该系统支持基于单应矩阵的算法和基于柱面坐标的全自动全景拼图算法。
The numerical increment method is offered to analyze the axisymmetric response of nonlinear elastic cylindrical shells under axial impact.
采用增量数值解法分析了轴向冲击下非线性弹性圆柱壳的轴对称响应。
Based on the theory of cylindrical particle diffraction, a numerical calculation method that can be used to measure non spherical particles is presented.
以柱形颗粒的衍射理论为基础，提出了适用于非球形颗粒衍射模型的数值计算方法。
There was no simple method to calculate the stress of oblique nozzle in the cylindrical pressure vessel.
圆柱形压力容器斜接管的应力计算还没有一个简便可行的计算公式。
An eight-node solid element with two parallel faces and one traction-free cylindrical surface is derived using the assumed stress hybrid method.
应用假设应力杂交元的方法，导出了一个八节点的实体元。此元具有二个平行的表面及一个无外力自由的园柱表面。
In this paper, a method of optimum profile design of cylindrical grinding gear hob is given.
本文提出了圆磨齿轮滚刀的优化造形法。该方法使圆磨滚刀的造形精度得到明显提高。
The eigenvalue problem of radially inhomogeneous cylindrical dielectric waveguides is solved by microwave network method.
用微波网络方法求解径向任意介质分布圆柱介质波导的本征值问题。
应用推荐