In this paper, the special cylindrical element method is discussed in calculating oil well case potential distribution to shorten computer operation time.
采用特殊的柱面单元及算法计算油井套管表面的电位分布，节约了机时，缩短了计算周期。
Based on the variational principle, the dynamic responses of flexible cylindrical liquid storage tanks, excited seismically have been analyzed by the finite element method.
本文根据变分原理，利用有限单元法分析在水平地震运动作用下圆柱形弹性储液罐的动力反应。
Based on the modified principle of Complementary energy, a hybrid stress shell element is formulated in the cylindrical coordinate system.
本文基本修正的余能原理，在圆柱座标系内，提出了一种圆柱块杂交应力单元。
In this paper, for strength analysis of cylindrical shells, model of ringed spline finite super - element is given.
提出一环状样条超级单元用于圆柱壳的分析。
An eight-node solid element with two parallel faces and one traction-free cylindrical surface is derived using the assumed stress hybrid method.
应用假设应力杂交元的方法，导出了一个八节点的实体元。此元具有二个平行的表面及一个无外力自由的园柱表面。
The elastic stiffness matrix and the geometrical stiffness matrix for a element of cylindrical shells been established by the relation ship of strain displacement in a lange deflection.
理论上采用大挠度的应变——位移关系，建立了圆柱壳单元的弹性刚度矩阵和几何刚度矩阵。
The similarity between equivalent stress distribution around the holes in cylindrical shell and its plate model is shown through finite element analysis.
有限元分析表明，开孔圆柱壳与其相应的平板模型在开孔附近的等效应力分布非常相似。
Plate-cone cylindrical reticulated shell is a new type of space structures composed with plate-cone element and double layer cylindrical reticulated.
板锥柱面网壳是一种新型的空间结构形式，它是建立在板锥单元系和常规的双层柱面网壳基础上的一种结构。
An isoparametric finite element program of large elastic-plastic strain (LEPS) is used to analyse the necking of a cylindrical bar and a plate specimen under uniaxial tension.
本文用弹塑性大应变问题的等参数有限元分析程序(LEPS程序)，对平板和圆棒试件的颈缩作了较全面的分析。
The establishment of variation-principle is of benefit to deriving the finite element method or semi-analytical solution to the cylindrical shell static-dynamical problems of piezoelectric materials.
变分原理的建立将有利于压电材料圆柱壳静力学和动力学问题的有限元方法或半解析法的推导。
The compression or tension forces are transmitted via the two threaded pins into the cylindrical casing, which is also the measuring element.
压缩力或张力通过两个螺纹销钉传递到圆筒形测量仪器中。
Finite element method was used to analyze the J integral evaluation method for a cylindrical specimen with deep circumferential crack under axial or torsional load.
通过有限元解析方法分别研究了轴向或扭转载荷下带环状裂纹圆棒试样的J积分的评价方法。
The phase-space finite element method is applied to the multigroup neutron transport equation in cylindrical critical systems.
本文采用相空间有限元方法求解了柱形临界多群中子输运问题。
The FEA model of prestressed cylindrical receptacle is built, and it shows contact element can be applied to simulate shrink-fit by the comparison with theoretical solution.
建立了预紧圆挤压筒有限元分析模型，通过和理论解的比较论证了接触单元法模拟过盈装配的可行性。
Through the researches on kind of cylindrical piezoelectric thin film micromotor mechanisms, finite element simulation and modal analysis are carried out in this paper.
通过对柱状薄膜型压电微电机致动机理的研究，运用有限元模拟进行模态分析。
We deal with the triangular mesh-discontinuous finite element method for solving the time-dependent anisotropic neutron transport problem in two-dimensional cylindrical geometry.
本文研究了求解二维输运问题的各向异性三角网间断有限元数值方法。
In addition, it analyses the crack resistance of the walls of huge reinforced concrete cylindrical tanks under prestressed measures by finite element analysis software of ANSYS.
另外还运用有限元程序ANSYS对预应力抗裂措施下的大型钢筋混凝土水池池壁类结构形式进行了仿真计算分析。
By using of effective mobility power flow method, vibration level and radiated power level of a element cylindrical shell are studied.
利用有效导纳功率流法研究了基本圆柱壳体的表面振级和声辐射功率级。
Based on the acoustic wave equation and structural motion equation, the vibration characteristics from the fluid loaded stiffened cylindrical double shell are studied by using finite element method.
基于流体的波动方程和结构的动力方程，利用有限元方法研究了考虑流固耦合时的双层加肋圆柱壳体的振动特性。
An engineering soft ware adapted to the finite element analysis of three dimensional contact stress in aircraft cylindrical gears is provided.
提供了一个适用于航空圆柱齿轮三维接触应力有限元计算分析的实用工程软件。
Using finite element method, this paper investigates the static behavior of cylindrical orthogonal single-layer lattice shell structures supported by fringe truss.
本文利用空间杆系有限元法，对采用边桁架支撑的单层柱面正交异型网壳进行内力分析；
The influence of line load width on the results of theoretical solution is studied by the way of finite element calculation of cylindrical shell under line loads with different acting width.
通过对多种载荷作用宽度的线压作用下的圆柱壳的有限元应力计算，研究线压作用宽度对理论解的影响。
First, use the finite element method to simulate the cylindrical specimen and the plate specimen rutting test.
首先，采用有限元方法建立模型，模拟圆柱形试件和板式试件的车辙试验。
The invention discloses a reinforced heat transfer element of a truncated cylindrical surface wing type vortex generator, belonging to the field of heat transfer parts of heat exchanger.
本发明公开了属于换热器传热零部件领域的一种斜截柱面翼式涡发生器强化传热元件。
The 3-d bulk temperature field distribution in cylindrical spur gears is computed by the three-dimensional boundary element method (3-d BEM).
本文首次采用三维边界元法来计算圆柱直齿轮啮合时的三维本体温度场问题。
Alternatively or in addition, the delivery element that is driven by rotation has a cylindrical outer wall region which is substantially smooth.
备选地或作为补充地，借助于旋转而被驱动的输送元件具有筒形的外壁区域，该外壁区域构造成大致上平滑的。
A new 5-nodes spesial hybrid stress element with free cylindrical surfaces has been developd based on the theory of Hellinger-Reissner.
论文将有限条法和应力杂交元法两者结合起来，导出一种兼有两者优点的数值计算方法——混合杂交有限条法。
Using finite element software ANSYS command flow and parametric design language (APDL) to establish standard involute cylindrical bevel wheel of 3d model of meshing.
我们帮您人工翻译，但要付费，有意加我扣扣。利用有限元软件ANSYS的命令流和参数化设计语言（APDL）建立渐开线标准斜齿圆柱齿轮啮合对的三维模型。
The Focal Performance Analysis of Cylindrical Microlenses by Boundary Element Method;
采用对偶边界元方法分析了梯度材料中的矩形裂纹。
The Focal Performance Analysis of Cylindrical Microlenses by Boundary Element Method;
采用对偶边界元方法分析了梯度材料中的矩形裂纹。
应用推荐