A short pipe densitometer is designed with the resonator of cylinder shell.
选用薄壁圆筒作为谐振子，设计了短管谐振式密度传感器。
When a laser beam irradiates a cylinder shell, the irradiated area becomes softer and the cylinder shell will be destroyed.
采用3维实体单元模拟激光辐照下静止及旋转充压柱壳的应力和应变分布，分析了柱壳可能发生破坏的位置和条件。
And dynamic response of different material and different parameter composite cylinder shell to underwater explosion load is analyzed.
基础上分析了不同材料圆柱壳和不同参数复合材料圆柱壳在水下爆炸载荷作用下的抗冲击性。
It is suggested that the oblique-cut semi-cylinder shell is a kind of VGs with efficient heat transfer enhancement but low pressure drop.
结果表明：斜截半柱面涡流发生器是一种强化换热效果好又阻力损失小的涡流发生器型式。
In this paper a set of tension formulas for composite winding outside thin wall cylinder are established according to theory of cylinder shell.
本文按圆柱壳理论建立了一套在薄壁圆筒外缠绕复合材料的张力公式。
An analytic formula for the mean temperature along the axial direction of a rotating cylinder shell irradiated by high energy laser beams is presented.
推导了激光辐照下转动壳体平均温度沿壳体母线方向分布的解析公式。
This paper calculate inherent frequency of the free vibration of the cylinder shell with the theory of the separated variable method on the basis of displacement model.
以位移模型为基础，用有限元中的分离变量法的理论，求解了圆柱壳自由振动的固有频率，计算结果与壳体解析解相一致。
The large-diameter cylinder shell is a new-type structure, which has been applied to the harbor and offshore engineering, especially on the silt seashore and soft clay regions.
大直径圆柱壳结构是港口及近海工程中的一种新型结构，其力学机理、破坏形态、作用荷载以及计算方法等均亟待研究。
In this paper, double cylinder shell structure with stiffening ribs is used to solve some problems about the impulsive environment of underwater explosion for submarine structure.
本论文以双层加筋筒形结构为主要研究模型，探讨了水下爆炸作用下潜艇结构冲击环境研究的如下几方面的问题。
The analysis method which can calculate the stress of the changing wall thickness section connecting the sphere head and the cylinder shell with unequal wall thickness has been established.
建立了通过变厚度筒壳把球壳与不等厚的筒壳相连接的不连续应力解析计算方法。
Use optimization module of ANSYS, to optimize rigidity and volume of the cylinder type shell of electrical machine of submarine.
利用有限元分析软件ANSYS中优化分析模块，对潜艇电机段壳体的圆柱型壳体的刚度和体积进行优化。
Plastic limit load of viscoplastic thick-walled cylinder and spherical shell subjected to internal pressure is investigated analytically using a strain gradient plasticity theory.
基于应变梯度塑性理论，分析了内压作用下厚壁圆筒和球壳的塑性极限荷载。
By using the analysis solution of differential equations based on thin shell theory, the stresses in pressurized long cylinder or piping stiffened with stiffeners were analyzed.
对用加强环加强的受压长圆筒或管道(简称加强圆筒)应用薄壳力矩理论微分方程的解析解求解加强圆筒中的各项应力。
They consist of concentric shells of graphite, with each shell rolled into a cylinder so the lattice of carbon atoms remains continuous.
它们由石墨的同心外壳组成，每个壳圈成圆柱，所以碳。
Based on the assumptions of small deformation and simple load, an analytical model of cylinder shallow shell is constructed, and the curve direction spring-back after trimming are given theoretically.
以矩形柱面扁壳为模型，从小变形、简单加载的前提条件出发，推导了矩形柱面扁壳切边后曲面方向回弹的理论解。
A new centering and clamp method was introduced in this text by processing of cylinder surface of pump shell.
通过泵壳在立车上径向外圆的加工，介绍了一种新型的找正、装夹方法。
This paper presents a new method to calculate the limit load of thick wall cylinder and thick wall spherical shell based on Yus Unified Strength Theory and a Unified solutions are obtained.
采用俞茂宏统一强度理论分析了厚壁圆筒和厚壁球壳的极限荷载，得出了统一解形式。
So the ring and stringer-stiffened cylinder is advised for the characteristics of the mono-shell submarine.
因此，纵横加筋圆柱壳被建议作为单壳体潜艇的结构形式。
The utility model is characterized in that the hollow cylinder-shaped detergent inlet is arranged on the rectangular-parallelepiped-shaped transparent outer shell by welding means.
其特征是它的空心圆柱形状的洗涤剂入口，采用焊接方法安装在长方体形状的透明外壳上。
The applicability of the restriction-equations method in smooth structures, cylinder with fixture fringe and shell with fixture seat is validated by FEM analysis.
通过有限元算例分析，验证了约束方程连接的体壳连接方法在平板结构、带安装边的圆壳结构以及带安装座的壳结构上的适用性。
Optimization design of a double layers cylinder lattice shell is systemically introduced.
系统介绍了某体育馆双层柱面网壳结构的优化设计。
The structure of the oil remover includes a cylinder-shape outer shell jointed by two half.
其结构是，它包括两半合对在一起的筒状外壳。
The shell behind the fan section is the cyclone guide cylinder which is internally provided with a guide channel used for separating gas from water.
风机段以后的壳体是旋风导流筒，旋风导流筒内设有导流槽，用于气水分离。
The drive cylinder, outer shell of built-in board brush, intermediate joint and sand collector are connected into stator;
驱动柱塞、安装过滤网的内筒、浮力阀顺序连接组成转子；
The experiment research on stability of ring-stiffened concave cone-toroid-cylinder combined shell is presented in this paper.
文章对凹型加肋锥-环-柱结合壳稳定性进行了模型试验研究，观察到凹环壳段失稳的一个特殊现象。
The experiment research on stability of ring-stiffened concave cone-toroid-cylinder combined shell is presented.
本文对凹型加肋锥-环-柱结合壳稳定性进行了模型试验研究，观察到凹环壳段失稳的一个特殊现象。
The experiment research on stability of ring-stiffened concave cone-toroid-cylinder combined shell is presented.
本文对凹型加肋锥-环-柱结合壳稳定性进行了模型试验研究，观察到凹环壳段失稳的一个特殊现象。
应用推荐