Precision measurement for cutting force plays an important role in the machining accuracy and efficiency of the numerically controlled machine tools.
在数控加工中，切削力的大小直接影响着数控机床的加工精度与效率，因此对切削力的准确测量非常重要。
At last, the cutting force model is validated through cutting tests.
最后，通过切削实验对切削力模型进行了验证。
The cutting force can notably be deduced using the cutting fluid during machining.
在切削加工中，使用切削液能显著降低切削力。
The cutting force signals and vibration signals are good means to research tool wear.
刀具的切削力和振动信号是研究刀具磨损状态的很好的手段。
PCD tool is the best tool material for precise machining from points of the cutting force view.
从切削力这一因素来看，PCD是精加工颗粒增强铝复合材料的最佳刀具材料。
The singular index of cutting force signal is proposed as a parameter for detecting cutter's wear.
提出采用切削力信号的奇异性指数作为衡量刀具磨损的参量。
The relationship between cutting force and process parameters is achieved via the numerous experiments.
通过实验，获得了切削力和工艺参数之间的关系。
The real-time obtaining of cutting parameters is one of the key technologies of cutting force prediction.
切削用量的实时获取是切削力预测的关键技术之一。
The estimated cutting force and the feedrate are the controlled output and the control input, respectively.
估计的切削力和进刀速度分别是受控的输出和控制输入。
An orthogonal cutting force model with tool flank wear has been analyzed based on cutting test investigation.
在试验研究基础上进行了有后刀面磨损的正交切削模型分析。
A primary analysis for cutting force of the tools and the frictional force in rotating seal ring are also given.
切削刀具的切削力及密封圈回转摩擦力的初步分析计算。
Dynamic cutting force of blade was an important parameter reflecting the cutting process during the cut of sugarcane.
甘蔗切割过程中，割刀动态切割力是反映切割过程的一个重要参数。
This paper researches into the unbalance factor of the cutting force and the cutting area in the face-milling process.
本文研究了端面铣削过程的切削力不均衡系数和切削面积不均衡系数。
The effect of tool rake angle on the geometric shapes of the chip, cutting force and cutting temperature is investigated.
分析了刀具前角对切屑几何形状、切削力和切削温度的影响。
The article studies the influence of cutting speed to the cutting force in the foundation of high speed cutting experimentation.
本文在高速车削的试验基础上，研究高速车削时切削速度对切削力的影响。
The results show that the main cutting force and radial force decreased by 23.5% and 19.9% compared with conventional machining.
结果表明，激光辅助切削的主切削力和径向力分别比常规切削下降了23.5%和19.9%；
In case the form of dynamic cutting force is varied, the optimal region of the stiffness spindle orientation is always different.
动态切削力的构成不同，工艺系统刚度主轴的最佳方位也不同。
The system consists of initial parameter and cutting depth input, cutting force and cutting power calculation, design result output.
该系统由原始参数、切削用量输入模块、动力参数计算模块、设计结果输出模块等几个主要模块组成。
Factors like internode, node, cutting thickness, moisture content, cutting speed could influence the cutting force in varying degree.
竹材的节间、节部、切削厚度、含水率及切削速度等因素对切削阻力均有不同程度的影响。
Secondly, the paper has developed the collection of cutting force and analytical system on the basis of existing hardware and software.
其次，本文在现有的硬件及软件的基础上，设计和开发了切削力的采集及分析系统。
The problem that the cutting force is hard to determine in high-speed milling process is solved by using the computer-aided engineering.
用计算机辅助工程的方法解决了高速铣削过程中切削力难以确定的问题。
After analyzing the effect factors of the cutting force in peripheral milling, the paper establishes a steady cutting force allowance model.
并在分析了周铣加工中切削力影响因素的基础上，建立了针对周铣加工的等切削力余量模型。
Property: lt is white and harder and more brittle than A. lt features strong cutting force and steady chemical property and excellent insulation.
性能：白色，较棕刚玉硬而脆，切削力较强，化学稳定性好，具有很好的绝缘性。
Based on traditional cutting force model in face milling, a new cutting force model for the prediction of static cutting forces has been presented.
以传统的端铣切削力模型为基础，提出了一种新的端铣加工中静态切削力的预报模型。
According to the result of right Angle free cutting experiment, the mathematical model of the cutting force for the arc-edge insert is established.
根据直角自由切削的试验结果，建立了圆弧刃刀片切削力数学模型，同时编制了软件进行预测。
For the disc shear blade breakdown problem, the idea of reducing cutting force bearing and reasonable allocation of blade cutting force are proposed.
针对圆盘剪剪刃崩豁问题，提出减小剪切受力和合理分配上下剪刃剪切受力的思路。
The research results show that the average axial cutting force and torque of common drill-grinding are greater than that of ultrasonic drill-grinding.
得出普通钻磨时的轴向平均切削力和平均扭矩均远大于超声钻磨加工时的轴向平均切削力和平均扭矩；
By the system, the cutter working condition on-line measurement and test can be made effectively on the basis changes of cutting force and spectral power.
这种系统能根据切削力及频谱能量的变化，有效地在线监测刀具工况。
The influences of cutting parameters on cutting force and its fractal dimension, surface roughness on the fractal Theory during glass cutting is presented.
基于分形理论研究了玻璃切削时不同切削参数对切削力及其分形维数以及表面粗糙度的影响。
The influences of cutting parameters on cutting force and its fractal dimension, surface roughness on the fractal Theory during glass cutting is presented.
基于分形理论研究了玻璃切削时不同切削参数对切削力及其分形维数以及表面粗糙度的影响。
应用推荐