What is the most recommended cutting condition for MSR?
最适合MSR的推荐切削条件是多少？
Design and cutting condition of carbide hob with radial negative front Angle were discussed.
论述了径向负前角硬质合金滚刀的设计及切削条件。
Spiral chip flute and helical cutting edge insert design, stable cutting condition, safety and reliability.
螺旋刃刀片设计，切削平稳，安全可靠。
Result shows that different cutting edge can be got by changing DCSP according to different cutting condition.
结果表明：可以通过改变钻头横截面轮廓来得到不同的刀具几何形状，适用于不同的加工条件。
The machinability of crystal material is studied, and the influence of the cutting condition on surface roughness is analyzed.
本文探讨了晶体材料的切削加工性，重点分析了切削条件对表面粗糙度的影响。
There are different critical speeds with different cutting condition and different matching of cutter and work-piece material.
不同刀具材料与工件材料的匹配在不同切削条件下有不同的临界速度。
The ultra high speed grinding mode may improve the cutting condition of the grains and thus reduce the specific grinding energy.
采用超高速磨削，对改善磨粒的切削状态，降低比磨削能是非常有利的。
Enlarging the clearance of gear shaping cutter can improve efficiently its cutting condition, the gear surface quality and tool life.
加大插齿刀后角可以有效改善插齿刀的切削条件，提高齿表面加工质量和延长刀具使用寿命。
One is the current signal model with bore cutting condition, and the another is the model of tool wear with cutting conditions and time.
第一种是基于电流信号的刀具磨损模型，第二种是直接基于刀具磨损量的模型，这两种模型均滤除了切削条件的影响。
Experiments indicate that this method has a high ratio of recognition in a range of cutting condition and even can detect novel tool faults.
实验结果表明，该方法不仅可以在多种切削条件下获得较高的识别率，还可以识别出新的刀具故障。
This paper proposes that the total rigidity of a machine tool can be calculated in terms of the typical cutting condition at the beginning of design for the CNC lathe.
提出可根据数控车床设计时选用的典型切削条件来计算机床总刚度。
In this article, new fuzzy mathematical models for optimized selection of cutting condition and their solving method are presented, which are more reasonable and more concise then the old ones.
给出了新的更为合理而简捷的切削用量优化选择模糊数学模型及其求解方法。
With the mathematic derivation it is proved that the cutter meets the specification of the gear meshing under the cutting condition and can correctly shape gears that can meet the design requirement.
通过数学推导，证明了该刀具在切削工况下符合齿轮啮合原理，可切制出满足设计要求的齿轮。
The technical background, applying condition and application prospect of using oxyhydrogen flame for the continuous cast products cutting are introduced.
介绍了利用火焰加工新能源—水电解氢氧气用于冶金企业连铸坯切割技术背景、使用状况及应用前景。
A relation model between cutting forces and cutting speed is established for high speed milling condition on the basis of research into the theory of shear distortion and the discrete milling cutter.
本文首先从切削剪切变形和刀具离散化理论出发，推导出高速铣削条件下铣削力和切削速度的关系模型。
Through collecting vibration signal and analyzing it in the frequency domain in the condition of changing parameter cutting, a single self power spectrum is hard to detect tool breakage effectively.
在变切削参数的加工工况下，通过对振动信号的采集和频域处理，发现采用单一的自功率谱方法难以有效检测出刀片破损。
This article focus on describe the type of cutting tools and cutting theory, Meanwhile, the detail cutting tools configuration has been proposed due to different geologic condition.
本论文着重介绍了刀具的种类和切削原理，同时针对不同的地层情况，提出刀具的具体配置方式。
This paper researches on the tool wear condition monitoring by cutting sound signal and workpiece surface texture based on analysis of the relative situation.
本论文在分析现状的基础上，从切削声信号和工件表面纹理这两个方面对刀具磨损状态监测技术进行了研究。
Through the analysis of the condition of processing technique for element, as well as the research of cutting Forming movement.
通过对零件的加工技术条件的分析，以及切削成形运动的研究。
Among the various way to monitor the condition of cutting tool, the way through Acoustic Emission (AE) is a most promising method.
在对刀具切削状态进行监测的众多方法中，声发射方法是一种最有前途的方法。
This paper introduces the experiment condition and process to carry out hot cutting on silicon nitride ceramics materials with new self-made water-plasma arc equipment.
主要阐述了采用自制新型水介质等离子弧设备对氮化硅陶瓷材料进行加热辅助切削的试验条件及过程。
The usage status of cutting fluid can be observed directly by iron spectrometer under a suitable test condition.
在合适的试验条件下，还可利用铁谱仪直观地了解切削液的使用状态。
Container loading is the three-dimensional problem in "cutting and packing" problems. It is combined optimization with complex constraint condition.
集装箱装入问题是“切割和装入”问题领域中的三维空间问题，是具有复杂约束条件的组合优化问题。
The factors such as the cold storage time, the picking time, the position of picking, cutting base or not and the condition of temperature all affect the rooting of the needle fascicles.
针叶束水培生根受冷藏时间、采叶时间、采叶部位、切基与否、针叶长度和培养时的温度状况等因素的影响。
An optimization mathematical model of cutting elements is founded by technical requirement and forced condition when turning. The optimum of cutting elements is got by using penalty function method.
根据车削时的加工要求和受力情况，建立切削用量优化设计的数学模型，采用惩罚函数法进行优化，得到了切削用量的优化结果。
The article introduces synthetically technological properties, cutting quality and equipment, the present problems and the applied condition for low-current air plasma cutting.
本文就小电流空气等离子弧切割工艺的特性、切割质量、切割设备、存在问题和应用情况作了综合介绍。
The article analyzes the characteristic and the working condition of the cutting fluid using in electrical discharge machining (EDM).
分析线切割工作液的工作特点及工作状态，从生产实践中总结出科学合理选择使用工作液的方法。
Based on acoustic emission, power monitoring and improved neural network technology and using cutting tool monitoring software, the normal or abnormal condition of cutting tools can be identified.
以声发射、功率监控和改进的神经网络技术，借助刀具监控软件，识别刀具切削工作的正常和失效状态。
The milling force model is validated according to cutting experiments and it can offer a reliable boundary condition for the further study of NC machining distortion of aviation aluminum-alloy.
采用合理的平均力试验验证了模型的有效性，为进一步研究航空铝合金数控加工变形提供了可靠的边界条件。
The milling force model is validated according to cutting experiments and it can offer a reliable boundary condition for the further study of NC machining distortion of aviation aluminum-alloy.
采用合理的平均力试验验证了模型的有效性，为进一步研究航空铝合金数控加工变形提供了可靠的边界条件。
应用推荐