This paper gives a new method evaluting the optimum fitting straight of sensors-the golden cut method(0.618 method).
介绍一种采用最优化方法—黄金分割法（0．618法）求解传感器最佳拟合直线的新方法。
In this paper, for resolving these two problems, a new image Mosaic method based on graph cut is presented.
为解决这两个问题，提出了一种基于图切割的图像拼接方法。
In the paper, the probability analysis method of the cut strength of cement soil pile composite foundation is investigated.
研究了粉喷桩复合地基抗剪强度概率分析的方法。
This paper present the analytical method for structural load calculation for SWATH ship, and the short cut method with empirical formula for preliminary design.
本文提供了小水线面双体船(SWATH)结构载荷的解析方法以及用于初步设计的简捷算法经验公式。
The cut method for Gussian beam having axisymmetry is discussed in detail and the expression for the cut factor is defined in this paper.
详细推论了高斯分布的轴对称电子束的截断方法和确定截断因子的表达式。
The paper reports the measurement of the effectiveness of control rodreflectors on ZPR with pulse method, source cut method and period method. Theexperiment method and results are discussed.
文章介绍了在微型堆零功率实验装置上用脉冲法、断源法和周期法对原型微堆中心控制棒及反射层效率测量的结果，并进行了讨论。
This paper proposes a new short-cut method of number conversion.
文章给出了数制之间转换的简洁、明了方法。
Such feasible classification method makes the content of paper-cut combination model concentrated comparatively, which could be easy to carry out the culture's combing.
这样的分类方法使得剪纸组合造型的内容较为集中，便于进行文化方面的梳理。
In this paper, practical case is used to study the application of folk paper-cut elements. It's expected that the paper can supply a method for the application of other folk arts in relevant field.
本文通过实际案例进行民剪纸艺术元素运用的设计方法研究，以期能对其他民间美术品类在相关领域的运用提供借鉴。
This paper presents a method of layout plan of large area pseudorandom sequence diffusers to cut down the diffuse peaks and to meet user's demand.
为了消除这些旁瓣，并得到符合使用者要求的扩散声压响应曲线，本文提出一种实现伪随机序列扩散体群大面积最佳布置方案的布置方法。
This paper introduces the construction speciality, positioning method and stress analysis on primary pressing model of the bar cut.
本文详细介绍了槽钢锁口一次冲压成型模具结构的特殊性，定位方式及受力分析。
To prevent and deduce electrode accidents, the paper puts forward the imagination of joining electrode-shell webs with cut-in method.
为防止和减少断电极事故，提出了用插扣法连接电极壳筋片的设想。
Based on experimental observation and strict mathematical theory demonstration this paper doubts the conventional method to extract water cut of high water cut oil reservoir and the measuring results.
通过实验观测和严密的数学理论论证对高含水油层中求含水率的传统方法和测量结果提出了质疑。
This paper introduces the used safety measures and the matters needing attention in construction of tunnel cut by TBM method in Tashan coal mine of Datong City.
文中介绍了用隧洞掘进机（TBM）在大同塔山矿主平峒掘进施工中采取的安全措施和应该注意的事项。
This paper analyses factors of influencing papers superpose in high-speed cut paper machine, puts forward the control method.
分析了影响高速切纸机中纸张搭结的因素，给出了控制方法。
With an example of two lines short and grounding fault, and one side of breaker of grounding fault line being cut off, the paper illustrates the principle of this calculation method.
文中以跨线并接地的横向故障和接地故障线的一侧断路器断开后的复杂故障为例阐明了该算法的原理。
The paper introduces a fitting method between water jet and PDC bit tool, that is, aid bit tool cut rock while water jet is directed from suitable location of bottom of bit tool.
介绍了一种射流与PDC刀具的配合方式，即水射流位于刀具底部适当位置辅助刀具切割破碎岩石。
The paper describes decide of monitoring lower-cut with method of mathematical statistics.
该文介绍如何用数理统计方法判定检测下限。
This paper gives a short cut method to derive from molecular speed distribution function in the molecular ray.
给出了导得分子射线中分子速率分布函数的一种简捷方法。
By analyzing the localization of cut in processing poston ring, this paper determined a new processing method for poston ring, which has high positioning accuracy and high production efficiency.
通过对活塞环加工过程中开口准确定位问题的分析，确定了一种定位精度高、生产效率高的加工工艺。
The method can manufacture the paper-cut crafts with mechanical equipment, guarantees the quality and industrially produces the paper-cut crafts.
这种方法可以用机械设备制作剪纸，保质保量工业化成批生产剪纸工艺品。
This paper presents a method of calculating relative permeability in an oil reservoir with the help of production data-water cut.
提出了一种应用生产数据含水率计算油藏相对渗透率的方法。
This paper puts forward a computation method on cut-frequency of all TE models of square symmetry wire by which chromatic dispersion curves can be drawn.
本文提出了一种计算方形对称传输线TE模的各模式的截止波数，以及根据各模式的截止波数计算各模式的色散曲线的方法。
This paper deals with concerns the construction of an icosahedral quasilattice by the cut and project method.
用切割投影法研究了二十面体准点阵结构。
The necessity of carrying out numerical simulation by different stages and the corresponding method of it for high water cut period is put forward in this paper.
针对油田高含水期的特点，提出了划分阶段进行数值模拟的必要性和分阶段数值模拟方法。
So, this paper presents an information hiding method based on filling random sequences. In this method, the gold-cut algorithm is used to give the rate of hiding information and hidden information.
因此，文章提出了一种基于随机序列填充的信息隐藏方法，该方法中使用黄金分割算法计算出被隐藏信息的大小，然后使用填充算法将秘密信息隐藏在随机序列中。
The method discussed in this paper refers to the cut and consolidated fill method in which drilling is done by jumbo, broken ore moved by LHD unit and the filler transported by pipeline.
该采矿法指用台车凿岩、铲运机出矿和管道输送充填料的胶结充填采矿法。
The paper introduced the method of measuring Plank's constant by determining the cut-off voltage in photoelectric effect experiment.
本文简单介绍了光电效应测普朗克常数实验的基本原理及测量截止电压的三种方法。
This paper describes a novel method to realize microprocessorcompensated crystal oscillator(MCXO)by using the dual-mode excited AT-cut quartz crystal resonator(QXR).
本文介绍实现AT切石英晶体振荡器微处理器温度补偿的新方法——双频温度自测法。
This paper is aimed at searching for a new method in customized cut-off cold formed profiles steel on roll-forming line. The slant shear theory is put forward and a new machine is designed.
针对辊压线生产型钢定长锯切的缺点，进行了研究和探索，提出采用在线剪切方式，分析了剪切原理，得出了剪切力和剪切行程。
应用推荐