It's possible to misjudge the depth of a cut, making it so deep that it requires stitches (or, in extreme cases, hospitalization).
有可能对切削深度产生误判，以至于割得如此之深，需要缝合(或者在极端情况下需要住院)。
And then we also place tissue depth markers on the skull at very specific areas, cut to very specific links and millimeters that help guide her in developing or recreating the tissue.
然后我们还要在一些非常特殊的头骨位置上放置肌肉组织深度标记。标记的长度按照某些非常的具体关系决定，精确到毫米，帮助引导她重建面部的肌肉组织。
People are sacrificing depth and feeling and becoming cut off and disconnected from other people.
人们正在牺牲深度和感觉，慢慢中断和其他人的联系。
The five nuclear weapon states also exchanged in-depth views on the immediate commencement of negotiations at the Conference on Disarmament in Geneva on a Fissile Material Cut-off Treaty (FMCT).
五核国还围绕如何推动日内瓦裁军谈判会议尽快启动“禁产条约”谈判问题深入交换了意见。
The conditions which have an important influence on metal cutting are work material, cutting tool material, cutting tool geometry, cutting speed, feed rate, depth of cut and cutting fluid used.
对金属切削有重要影响的条件有工件材料、刀具材料、刀具几何形状、切削速度、进给率、切削深度和所用的切削液。
The workpiece is clamped in position, and cutter is located against the setting block, which provides setting or cutter position and depth of cut.
工件被夹持到位，铣刀靠着提供安装或铣刀位置及切削深度的安装台定位。
The selection of a suitable feed depends upon many factors, such as the required surface finish, the depth of cut, and the geometry of the tool used.
合适进给的选择取决于许多因素，例如所需表面光洁度、切削深度和所用刀具的几何形状。
Early machine tools were operated by craftsmen who decided many variables such as speeds, feeds, and depth of cut, etc.
老式机床通常是由工人操作并由他们决定机床速度、进给量、切削深度等。
Thee three factors of cutting include cutting speed, feed and the depth of cut.
切削用量三要素包括切削速度、进给量和（或叫吃刀量）。
But whether the depth of carbonization wood preservative effect will be destroyed because of cut?
不过深度炭化木防腐作用是否会因为切割而受到破坏？
Tangential grinding forces are obtained through monitoring spindle power and the ir variations are studied with process parameters such as depth of cut, feedrate and wheel grit size.
通过测量主轴功率获得切向磨削力，讨论了加工参数，如切深、进给率以及砂轮粒度对切向磨削力的影响。
In this paper, effects of depth of cut and feedrate on mechanical properties of metallic fiber are investigated by spinning bit.
研究了用自旋转车刀加工金属纤维时，切削深度和进给量对纤维力学性能的影响。
During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest.
在端面车削操作中，进给由横向滑板提供，而切削深度则通过大拖板或复式刀架控制。
In this article, the author demonstrates the measurement of scratched depth on aero cabin glass with light cut and phase contrast in detail.
应用光切法和相衬法，对飞机座舱玻璃划痕深度的测量问题，进行了详细的论述．。
The axial feed is provided by the carriage or the compound rest, either manually or automatically, whereas the depth of cut is controlled by the cross slide.
轴向进给通过大拖板或复式刀架手动或自动提供，然而切削深度则由横向滑板控制。
In many cases of stainless steel cutting operations with carbide tools, a tool life strongly depends on flank notch wear of depth of cut rather than average flank wear of main cutting edge.
硬质合金刀具在不锈钢加工中，其刀具耐用度主要是取决于后刀面边界磨损而不是主切削刃后刀面的平均磨损量。
As we can see in that figure, the depth of cut (and consequently the load) gradually increases on the successively engaged cutting edges.
就像在此图中能看到的那样，切削深度(及作为结果的载荷)随着切削刃持续进入切削而逐渐增加。
In this paper the construction plan of mid depth parallel cut blast is introduced, meanwhile some important technical questions are pointed out.
介绍了采用中深直眼掏槽爆破的施工方案，并指出几个关键性的技术问题。
A quadratic model of predicting helical milling force was researched. The effects of spindle speed, feed per tooth, and axial and radial depth of cut were analyzed.
通过统计学中的响应曲面法建立了螺旋铣削过程中切削力的二阶模型，并分析了主轴转速、每齿进给量、轴向和径向切削深度等因素对切削力的影响。
Depth of cut, d, is the normal distance between the unmachined surface and the machined surface.
切削深度d是未加工面与已加工面之间的垂直距离。
It can cut the tape automatically when pasting, adjust the belt length and the depth freely, and control the temperature with a temperature control system .
贴合时自动截断胶带，胶带贴合长度长短可调，贴角机深度可随意调节，适合多种纸盒、数字温度控制，附加温控系统。
Grasping the top, knurled section of the depth adjustment rod (Q), slide it up so that the TAB (EE) aligns with the desired depth of cut on the pillar scale (FF).
抓住深度调节杆(Q)的顶部，向上抽，使定位片(EE)的顶面对正柱形尺(FF)上希望的切削深度。
They provide a constant depth of cut and fewer blade changes.
它们提供了切不断深入和减少叶片的变化。
Radiosurgery had good control of shape and depth of incision, thor - ough hemostasis and coagulation, clean-cut surgery field and slight scars after operation.
其对手术切口形状和深度控制精确、止血有效、术野层次清晰、术后瘢痕小。
Hence the conducting sieve tubes do not necessarily be cut off at the usual cut - ting depth required.
因此，按规定的深度割胶，并不直接切断有功能的筛管。
Dry and wet masonry blades provide a consistent depth of cut with less dust than abrasives.
干湿砖石刀片提供少于磨料粉尘削减一致的深度。
This particular model predicts the depth of cut achievable with any given set of process parameters.
这个模糊控制模型可以预测在任何给定一组加工参数时，可获得的切割深度。
This particular model predicts the depth of cut achievable with any given set of process parameters.
这个模糊控制模型可以预测在任何给定一组加工参数时，可获得的切割深度。
应用推荐