The arc voltage, current, power and resistance of a nitrogen gliding arc in one period were studied.
以氮气滑动弧为例，分析了其在一个周期内电弧电压、电流、电阻和功率的变化特性。
Switching applications of high impedance circuits include low current, high resistance, and high impedance voltage applications.
高阻电路的切换应用包括小电流、高电阻和高阻抗电压应用。
There are at least three electrical quantities in any circuit, these are current, voltage and resistance.
在任何电路中至少有三个量，它们是电压、电流和电阻。
Test electrical and electronic equipment and components for continuity, current, voltage and resistance.
测试电气和电子设备和组件的连续性，电流，电压和电阻。
Ohm's Law - relationship between voltage, current and resistance in D. C. circuit.
欧姆定律—在直流电路中，电压，电流与电阻的关系。
So far, we have discussed considerations specific to voltage, current, resistance, and charge measurements.
至此，我们已经讨论了专门针对电压、电流、电阻和电荷测量所要考虑的问题。
Further information on shielding low current, high resistance, and high impedance voltage circuits can be found in Section 5.
关于屏蔽小电流、高电阻和高阻电压电路的更多信息，可参考第5章。
Even high resistance paths between low current conductors and nearby voltage sources can generate significant leakage currents.
即使小电流导体和附件电压源之间的高阻通路也会产生明显的漏流。
Measuring the voltage coefficient of a high resistance requires sourcing a voltage and measuring a low current.
测量高电阻的电压系数需要输出电压并测量小电流。
Here, an electrometer ohmmeter is forcing a current (IR) through the unknown resistance (RS) and then measuring the voltage (VM) across the DUT.
静电计欧姆计的电流激励(IR)流过未知电阻(RS)，然后测量dut上的电压(VM)。
The machine contain main functions of above four testing apparatus, it can automatic test leaking current, grounding electric resistance, dielectric intensity, resting voltage and print testing data.
具备四种测试仪的全部主要技术性能，可连续自动测试漏电流、接地阻抗、电介质强度、剩余电压。可打印测试数据。
In physics, one of the well-known laws is Ohm's law, on the basis of this law we can know the relation of the current, the voltage and the resistance.
在物理学中，一个众所周知的定律叫欧姆定律，根据这个定律我们可以知道电流，电压和电阻之间存在的关系。
An current varies directly as the voltage force and inversely as the resistance.
电流的大小与电压成正比，与电阻成反比。
The accurate measurement of welding current and voltage is very important to the exact control of resistance spot welding inverter and welding quality.
焊接电流与电压的准确测量对精密控制逆变电阻点焊电源和保证焊接质量至关重要。
Resistance current measurement of zinc oxide surge arrestor (MOA) under operating voltage possesses important significance of reflecting the operation state of MOA and whether it incurred damping.
在运行电压下测量氧化锌避雷器的阻性电流，对于反映MOA是否受潮和其运行的状态具有重要意义。
Otherwise, the current drawn from the cell electrodes will cause a voltage drop across the internal resistance of the electrode and may polarize the cell.
否则，从电池电极吸取的电流将会在电极的内阻上产生电压降并可能使电池极化。
It can be used to set current, automatically detect the voltage drop of the two slip ring electrodes in a certain current, and the insulation resistance and leakage between the slip ring and the axis.
可以设定电流，自动检测集电环两个电极在一定电流下的电压降，并且还可以检测集电环与轴之间的绝缘电阻及漏电流。
Thee resistance can be determined provided that the voltage and current are known.
译文：只要知道电压和电流，就能测定电阻。 。
Electronic load can be set for constant current, constant resistance and constant voltage operation.
电子负载可以设置为恒流﹐恒阻和恒压模式。
This paper introduces the automatic range conversion circuit of voltage, current and resistance normalized measure and the working process of software.
介绍将电压、电流、电阻归一化测量的自动量程转换电路及主要软件流程。
The limiting resistance in SFCL and the fault detection time impact on peak value of fault current, line voltage of feeders without fault and voltage across SFCL are analysed.
给出了超导限流器的数学模型，着重分析了超导限流器限流电阻和故障检测时间对短路电流峰值、非故障线电压、超导限流器上的电压的影响。
Given the voltage and the current, the resistance can be determined according to Ohm's Law.
已知电压和电流，根据欧姆定律，就可以求出电阻。
The table clearly shows that less current will flow with more resistance and the same voltage.
该表清楚地表明了，在电压相同时，电阻越大，通过的电流就越。
The hardware of the system mainly consists of a ZHJ-1B current sensor, a self-made resistance strain force sensor , the device for measuring electrode voltage and a NI-DAQ 6062E data acquisition card.
系统的硬件主要有：ZHJ-1B型电流传感器、自行研制的电阻应变式力传感器、电极间电压测量装置及NI-DAQ 6062E数据采集卡等。
Step five: tune the final stage power transistor quiescent current, the current value of the power tube by measuring the voltage of the emitter resistance Converter and get.
第五步：调末级功率管的静态电流，该电流值可以经由过程测功率管的发射极电阻的电压换算而得到。
In operation, a small excitation current is passed across the element, and the voltage, which is proportional to resistance, is then measured and converted to units of temperature calibration.
在操作中，微弱电流通过元件，电压与电阻正比，然后测量并转换为温度校正的组件。
It includes several modules of the relationship between current and voltage, voltage and current, resistance and pulse width or height, fatigue characteristics.
该系统主要有电流与电压关系测试、电压与电流关系测试、电阻与所加的脉冲信号关系的测试和疲劳特性测试等模块组成。
The principle of compensation method to measure resistance is analyzed, and the measuring circuit of voltage compensation and current compensation is designed.
对补偿法测电阻的原理进行分析，设计了电压补偿测电阻和电流补偿测电阻的实验电路。该电路测量精度高，结构简单，操作方便。
All real voltage and current sources contain an internal resistance; therefore, they exhibit Johnson noise.
所有真实的电压源和电流源都具有内阻，所以它们都表现出约翰逊噪声。
All real voltage and current sources contain an internal resistance; therefore, they exhibit Johnson noise.
所有真实的电压源和电流源都具有内阻，所以它们都表现出约翰逊噪声。
应用推荐