The current heating system in China is investigated and analyzed, proposing the need for energy-saving.
主要就我国目前供热现状进行调研分析，提出节能降耗的必要性。
The dynamic temperature field during roll-bonding combined with high-frequency alternating current heating has been numerically simulated by a simplified model.
通过数值模拟获得了高频加热-轧制复合过程中的动态温度场。
As a new cooling equipment, vertical cooler provides a special feature by using counter current heating exchanging principle, that results desired cement cooling effect.
作为一种新型的冷却设备，立筒式水泥冷却器具有其独特的结构，利用逆流换热原理，获得了良好的水泥冷却效果。
It takes into account current temperature, current humidity, and current season of the year in determining the heating or air conditioning setting for the area being monitored.
它考虑当前温度、当前湿度和当前季节，以便为所监视的区域确定供热或空调设置。
We're trying to set an example because the country may face a severe electricity shortage if the current pace (of heating consumption) continues.
我们尽量以身作则，如果人们还按照现在的速度来消耗热量，那么韩国可能会面临严重的电荒。
Thus, one way to minimize the effects of device heating is to use the lowest current possible while still maintaining the desired voltage across the device being tested.
所以将器件的加热效应降到最低的一种方法是使用尽可能低的电流，而在被测器件上仍然保持希望的电压。
Using the current detection module of DT3, the daily maintenance and detection of infrared heating plate is very convenient, work efficiency improves.
利用DT3配置的电流检测模块，红外加热片的日常维护检测极为方便，提高了工作效率。
The heating produced does not depend on which way current is flowing.
所产生的加热作用与电流像哪个方向流动无关。
The pitch is 105 x 68 metres and has an automated sprinkler system and under-soil heating. The current normal capacity is 63,000.
场地长105米，宽68米，拥有自动洒水系统和地底加热系统，目前能容纳63000人。
By comparing the heating effect of an unknown AC signal to that from a known DC reference, metrologists can determine the RMS AC quantity (voltage or current) in terms of the DC quantity.
为了对比一个已知直流参考的未知交流信号热效应，计量人员可以确定在一段时间内直流的交流有效值(电压或电流)。
Based on analysis of main process parameters such as upsetting velocities, heating current, upsetting pressures etc., the optimum control system of process parameters is determined.
在对镦粗速度、加热电流、镦粗压力等主要工艺参数分析的基础上，建立了工艺过程的优化控制系统。
The leakage current is of no use rate. The current does not leak the thermocouple insulation driving motor, lighting and heating, but it will still occur.
漏泄电流是没有用率的。经绝缘层漏泄的电流并不能热电偶驱动马达、发光或加热，但是依然会发生耗费。
In this paper, the relation of evaporator temperature and heating current has been investigated and discussed.
本文通过实验研究了蒸发舟温度与加热电流的关系，并对结果作了分析。
The effect on measurement of the isolator material and the magnitude of heating current inside the detecting head is discussed.
讨论了探头内部的绝热层材料和加热电流的大小对测量的影响。
Electric field, voltage and current density of the slag pool in the electro-slag heating process are the main influencing factors of temperature field in the metal surface.
在电渣加热过程中，渣池中的电场、电位和电流密度都是影响渣池中金属表层温度场的主要因素。
The high plasma current allowed in a RFP is expected to be sufficient to heat the plasma to ignition without the need of auxiliary neutral-beam or radio-frequency heating.
在反场箍缩条件下可允许用强等离子体电流充分加热等离子体到点火温度，而不需要辅助的中性束或射频加热系统。
The test showed that the simulated results were influenced greatly by the soak time after heating, the current density and the sample shape.
实验发现加热毕后停留时间、线圈的电流密度、试样形状等对模拟结果有很大影响。
So it is significant that predict the model of heating current.
因此，对电镦机中加热电流进行模型预报有着重要意义。
An optimum heating current data base in Electric Hot Machining is constructed in this paper and an inserted algorithm is applied in this base.
建立了一个导电加热切削最佳加热电流数据库，并将插值算法应用到该数据库中。
This paper analyses the problems existing on the current residence heating system.
分析了目前住宅采暖系统存在的问题。
Taking the course of the electric upsetting as an example, combining Neural Network with virtual instrument, we has put forward a virtual instrument about prediction of heating current.
在电热镦粗过程中，采用神经网络和虚拟仪器相结合的方式，创建了加热电流预报的虚拟仪器。
The three most important effects of an electric current are heating, magnetic and chemical effects.
电流三种最重要的效应是热效应、磁效应和化学效应。
A novel induction heating power based on current hysteresis band control and SVPWM modulation technology is introduced in this paper.
介绍了一种新颖的基于电流滞环和空间电压矢量调制(SVPWM)技术的电压、电流双闭环感应加热电源。
Its characteristic is, fast heating speed, and overheat protection, avoid excessive current damage caused by burn machine, safe and convenient installation.
其特点是，加热速度快，并有过热保护，避免电流过大烧坏机器造成损，安全且安装方便。
The parameters of heating rate, energy, current waveform and time should be controlled precisely in order to insure the quality of minisize piece spot welding.
为了确保微型件点焊质量，往往需要对点焊过程的加热速度、能量、电流波形、时间等参数进行精密控制。
Use clamp ampere meter to measure the current and check if the heating power is normal.
用钳形表测量电流，检查发热功率是否正常。
When the furnace has been using for quite a long time, if it is discovered that the heating current cannot be increased even though the heating power knob is adjusted clockwise to the limit.
在电炉使用相当长时间后，如发顺时针方向调节加热功率调节钮至最大位置，加热电流仍上不去。
When the furnace has been using for quite a long time, if it is discovered that the heating current cannot be increased even though the heating power knob is adjusted clockwise to the limit.
在电炉使用相当长时间后，如发顺时针方向调节加热功率调节钮至最大位置，加热电流仍上不去。
应用推荐