The better formulation of visible light-curing adhesive and composite resin were obtained through orthogonal experiment.
通过正交实验获得了可见光固化胶粘剂及复合树脂的较佳配比。
The effect of active monomers, oligomers and couple agent on shear strength and volume shrinkage of UV-curing adhesive was investigated.
考察了活性单体、预聚体及偶联剂对紫外光固化胶粘剂的粘接强度、体积收缩的影响。
Highly effective composite pipeline reinforcement system containing fast-curing adhesive , composite wrap materials and process was investigated in this thesis .
研究了含缺陷输油管道的复合材料修复技术，制备了复合材料修复技术用室温固化胶粘剂和复合材料卷材。
During the integrated circuit packing process, the quality and service life of integrated circuit are decided directly by the quality of conductive adhesive through non-oxidation thermal curing.
在集成电路封装工艺过程中，对导电胶进行无氧化加热固化的质量直接决定了集成电路的质量和使用寿命。
The factors which influenced adhesive strength, curing speed of reactive polyurethane hot melt adhesive were studied.
考察了各因素对反应型聚氨酯热熔胶粘接强度、固化速度等性能的影响。
Curing and the dispersion of filler are two important factors for the conductive adhesive.
固化和填料的分散性是影响导电胶粘剂的两个重要因素。
The results show that nanometer microwave-absorber can obviously decrease the microwave curing time of modified epoxy adhesive under the same curing condition.
结果表明，在相同固化条件下，纳米微波吸收剂能明显降低改性环氧胶粘剂的微波固化时间。
This product is glass cotton exert adhesive, heating curing the carpet shaped materials.
本品为玻璃棉施加粘合剂，加温固化成型的毡状材料。
This paper concisely introduced the effects of the choice of curing agent, the flexibilizer quality and the active filler on the mechanical properties of the adhesive.
简要介绍了固化剂的选择、不同增韧剂的优劣及活性填料等材料对胶粘剂力学性能的影响。
Resorcin diepoxide ether adhesive is a high strength adhesive curing at room temperature.
间苯二酚二环氧醚胶粘剂是一种室温固化高强度胶粘剂。
There is great difference in the performance among the different epoxy curing system, the kinds and the contents of the modified components have influence on the performance of the adhesive.
不同的环氧固化体系的性能存在较大差异，改性材料的种类和用量对结构胶的性能也存在不同程度的影响。
The dispersant accelerates gluten's dissolving in water, but it impairs the viscosity, curing velocity and water-resistant ability of the adhesive.
结果表明，分散剂对谷朊粉在水中的分散起到了极其重要的作用，但会降低标签胶的黏度、耐冰水能力，延长固化时间。
The influences of surface treatments, the pressures during bonding process and the thickness of adhesive layer on shearing strength were investigated with epoxy resin-DDS curing system as adhesive.
采用环氧树脂-DDS固化体系作为胶接剂，探讨了各种金属表面处理方法、胶接时对胶接面施加的压力、胶层厚度等因素对胶接剪切强度的影响。
The influences of photoinitiator, crosslinking agent and cure time on the properties of UV curing pressure sensitive adhesive were discussed in the paper.
在常温下涂布后直接紫外光交联固化，考察了光引发剂、交联剂、光固化时间等因素对UV固化压敏胶综合性能的影响。
The tests of curing condition, resistance to medium and hydrothermal ageing showed that the J-200-1D adhesive has excellent processing properties and resistance to weathering.
通过进一步对胶粘剂的固化条件、耐介质性能及耐湿热老化性能的考查，说明J-200-1D胶粘剂具有优异的工艺性能及耐候性能。
The method of curing in a magnetic field is also suitable for resin coating and adhesive.
磁场中固化还适用于树脂涂层和粘接层。
This paper reviewed the pre - sent state, research goal and the method of latent system curing at moderated temperature, which was used as the curing agent of structural adhesive.
本文综述了结构胶粘剂的潜伏性中温固化体系的现状、研究方向和方法。
Two siloxane epoxy curing agents were synthesized, and the effects of the products on the adhesive strength, refractive index and transparence of epoxy adhesive were studied.
合成了两种硅氧烷环氧固化剂，并研究了它们对环氧树脂胶粘剂的粘接强度、折射率、透光性等方面的影响。
The one component solvent-free moisture curing polyurethane adhesive was researched.
研制了单组分无溶剂型湿固化聚氨酯胶粘剂。
The soft mica plate, with MR 46 as adhesive and cured by special curing agent, has good moisture resistance and flexibility.
MR—46与专用固化剂配合使用，制成的云母板具有良好的防潮性、柔韧性。
With hardener K-35 forms heat curing epoxy adhesive characterized by outstanding mechanical strength even at 120 deg c.
与K - 35固化剂组合，形成热固化胶粘剂，即使120度也能保持很高的机械强度。
The curing system of a middle-low temperature curable epoxy film adhesive SY-70 was determined by the choices of proper accelerator and its content.
通过选择合适的促进剂及其用量，确定了中低温固化环氧胶膜sy- 70的固化体系。
The influence of inorganic filler, functional monomer, etching treatment of teeth surface, etc on the shearing strength of one-component visible-light curing orthodontic adhesive was studied.
研究无机填料、功能单体及牙齿表面酸蚀与否等因素对单组分可见光固化齿科正畸粘接剂剪切强度的影响。
The influence of the kinds of epoxy resin, the proportion of composite curing agent , and the content of accelerant on the adhesive strength and heat resistant properties of adhesive were discussed.
重点讨论了环氧树脂种类、复配合固化剂比例以及促进剂用量对胶粘剂粘接强度和耐热性能的影响。
Properly adjusting the process of adhesive mixing, modifying the type and dosage of the curing agent could successfully sol...
通过改进调胶工艺，调整固化剂类型与用量，可以有效解决此问题。
The adhesive has the performances of high shear strength, rapid curing, high-temperature resistance as well as long storage life and has been applied successfully on the assembly line.
该胶粘剂粘接强度高，固化速度快，耐温良好，储存稳定性佳，符合客户提出的工艺要求，并已成功地应用在生产线上。
Properly adjusting the process of adhesive mixing, modifying the type and dosage of the curing agent could successfully solve this problem.
通过改进调胶工艺，调整固化剂类型与用量，可以有效解决此问题。
The results of application experiment indicated that J-164 was a desirable room temperature curing core splice adhesive.
应用试验结果表明，J- 164胶是一种理想的蜂芯拼接用胶黏剂。
The results of application experiment indicated that J-164 was a desirable room temperature curing core splice adhesive.
应用试验结果表明，J- 164胶是一种理想的蜂芯拼接用胶黏剂。
应用推荐