Special for mullion V-shaped welding and cross welding cleaning.
专门用于塑料门窗中梃V型焊接及十字焊接焊缝的清理；
It showed that the weld cross section with both laser welding processes transformed from nail shape to near X shape with increase of laser power and decrease of welding speed.
结果表明，随激光功率增大和焊接速度降低，复合焊与单一激光焊焊缝的横截面形貌均由钉形向近X形转变。
Industrial mechanics and mill wrights may be cross-trained in a second trade such as pipefitting, welding, machining or electrical maintenance.
工业机械师和维修工在第二行业中可以交叉培训，如管件，焊接，机械加工或电器维修。
Once the proper alignments and angles have been achieved, the cross-members are ready for welding. A solid fillet should be welded around the entire circumference of each cross-member tube.
一旦正确的路线和角度已经实现，交叉成员焊接准备。一个坚实的鱼片应该管焊接周围人的整个圆周每个交叉。
Heating cable cross: must be used in explosive situations linear supporting proof junction box, the general situation can also be used splice or welding.
伴热电缆的交叉：在易燃易爆场合必须采用配套的防爆直线型接线盒，一般场合也可以采用绞接或焊接。
The longitudinal cracks along bond line and the transverse cracks which cut across the weld metal cross section inside weld metal were formed, while X65 pipe line steel was welding.
X65管线钢在焊接过程中，内侧焊缝金属出现横向和纵向沿熔合线方向的裂纹，横向裂纹贯穿焊缝金属横截面。
Cross sector seamless line, namely rail bar, rail bar and rail switch direct welding; the vertical force and displacement are direct transmitted between rail bars.
跨区间无缝线路，即轨条与轨条、轨条与道岔直接焊接，轨条之间直接传递纵向力和位移。
It requires high level for manufacturing technology and welding deformation control because the structure of cross-section is special.
十字形断面柱的结构特殊，对制作工艺及焊接变形控制要求较高。
The studying results indicate that the magnitude and distribution of residual stress are related to the heat input created by welding process and to the cross section geometry.
分析结果表明，厚板焊接工形截面残余应力的大小及分布，除了与焊接输入热量有关外，尚与截面几何尺寸有关。
Using a 1/16" drill bit, drill a hole in the middle of the cross section tube above. This will allow gas to escape during welding."
使用1 / 16“钻头，钻一个孔在上面管中间的横截面。这将使天然气逃脱焊接过程。
Hardness measurement on welding thermal simulated specimens and cross weld specimens showed that no softening occurred in the HAZ. All the cross weld tensile specimens ruptured in the base metal.
无论是焊接热模拟试件还是焊接接头硬度测试均表明HAZ不存在软化问题，接头拉伸试验断在远离热影响区的母材上。
Cold-formed steel cross section on the residual stress distribution is curved, and hot rolling steel or steel section on welding residual stress distribution is a thin film type.
冷弯薄壁型钢截面上的残余应力分布是弯曲型的，而热扎型钢或焊接型钢截面上残余应力分布是薄膜型。
This paper major in a summary about ascertaining main parameters of five-roll leveler used in finishing line (including cross-cutting line, slitting line and welding line).
主要对精整机组中用到的五辊矫直机主要设备参数的确定方法做了一个总结和概括。
Prior to welding these clamps to the frame, insure that they both are pointing straight forward and directly on top of each cross-member.
在此之前这些焊接夹具，框架，确保它们都是指向每个交叉成员直线前进，并直接在上面。
A new design method for large cross-section blade-like ultrasonic plastic welding horns with slots is pre-sented, and relative experiments have been done to validate this method.
提出了一种大尺寸长条形超声塑焊开槽焊头的设计方法，并对其进行了实验验证。
Once the proper alignments and angles have been achieved, the cross-members are ready for welding.
一旦正确的路线和角度已经实现，交叉成员焊接准备。
The completion of welding the faceplates to the cross-members finishes this section.
焊接完成的成员面板的交叉结束本节。
It is hot-rolled or cold-rolled strip or sheet for the blank shape by the cold bending process after the high-frequency welding as a square cross-section made of steel shapes and sizes.
它是以热轧或冷轧带钢或卷板为坯料经冷弯曲加工成型后再经高频焊接制成的方形截面形状尺寸的型钢。
It is hot-rolled or cold-rolled strip or sheet for the blank shape by the cold bending process after the high-frequency welding as a square cross-section made of steel shapes and sizes.
它是以热轧或冷轧带钢或卷板为坯料经冷弯曲加工成型后再经高频焊接制成的方形截面形状尺寸的型钢。
应用推荐