• The cross- section curvature ductility ratio for R. C inequiaxial T - shaped, L - shaped and cress - shaped columns is calculated by numerical method.

    采用非线性全过程数值分析方法,计算了钢筋混凝土不等肢T形、L形和十字形柱截面模型在多种工况下的截面曲率延性比。

    youdao

  • Each width series has a certain ratio of bearing width t to the height of the bearing cross-section (Table 1.9).

    每个宽度系列具有一定比例的宽度和高度(表1.9)轴承。

    youdao

  • The cross section aspect ratio of fiber and the distribution of matrix surrounding are taken into consideration in the model.

    该模型考虑了纤维截面的纵横比及基质在纤维周围的分布,对所有纵横比的情况都适用。

    youdao

  • The ratio of co-polarization differential scattering section to cross-polarization differential scattering section increases versus the increase of rain rate.

    共极化微分散射截面与交叉极化微分散射截面的比值随降雨率的增大而增大。

    youdao

  • A long-pulse laser, whose energy density can cause the liquid mass transferred, can get a greater ablation ratio and a hole with larger cross section.

    能量密度达到造成液态质量迁移条件的长脉冲激光,可获得较大的烧蚀率和截面积较大的通孔。

    youdao

  • The drift ratio of RC beams at yielding is related to the yielding strength of longitudinal bars and depth of beam cross section.

    RC梁的屈服位移角与受拉钢筋屈服强度、截面高度有关;

    youdao

  • When the upper state population is not reversed, the channel with greater ratio of emission and absorption cross-section has greater competitive advantage.

    当上能级粒子数处于未反转分布态时,具有较大的发射截面与吸收截面比值的波长信道拥有相对较大的增益竞争优势。

    youdao

  • Water content, swelling ratio, porosity, light transmittance and mechanical property were tested. SEM was used to observe the morphology of the cross section.

    测定复合支架的含水率、膨胀率、孔隙率、透光率和力学性能,利用扫描电镜观察样品横截面的组织形态。

    youdao

  • As the ratio of thickness to height of cross-section increases, the failure range decreases and the failure mode has the tendency of shearing failure.

    随着衬砌厚跨比的增大,混凝土衬砌的破坏范围逐步减小,衬砌更倾向于剪切破坏。

    youdao

  • The deformation characteristics of non free cutting (NFC) are experimentally studied with the chip cross section geometry, the deformation configuration and the cutting ratio.

    通过对切屑截面几何、变形状态及切削比的实验分析,研究了非自由切削的变形特征。

    youdao

  • The influences of formation condition and draw ratio in melt spinning on the hollowness of Circular cross section hollow polyester fiber are studied.

    本文就熔融纺丝成形条件及后拉伸倍数对圆中空聚酯纤维中空度的影响进行了探讨。

    youdao

  • The Cd increased with the depth-width ratio of notch cross-section, and increased to some extent with the hydraulic diameter of notch cross-section.

    流量系数随矩形节流槽截面深宽比增大而增大,并随截面水力直径增大而有所增大。

    youdao

  • Theoretical prediction on various kinds of dynamic information, such as the total absorption cross section, product vibrational distribution, and branching ratio, are presented.

    理论对各种动力学性质作出了预言。这些性质包括:吸收截面、产物的振动分布、反应通道比。

    youdao

  • In the case of a given shape of structure cross-section, the optimum total of prestressed reinforcement and the optimum ratio o...

    在给定截面形式下,求解满足结构性能约束和构造约束条件的预应力筋最优用量以及预应力筋与非预应力筋的最优比值。

    youdao

  • In the case of a given shape of structure cross-section, the optimum total of prestressed reinforcement and the optimum ratio of the prestressed and non-prestressed reinforcement can be o...

    在给定截面形式下,求解满足结构性能约束和构造约束条件的预应力筋最优用量以及预应力筋与非预应力筋的最优比值。

    youdao

  • In the case of a given shape of structure cross-section, the optimum total of prestressed reinforcement and the optimum ratio of the prestressed...

    在给定截面形式下,求解满足结构性能约束和构造约束条件的预应力筋最优用量以及预应力筋与非预应力筋的最优比值。

    youdao

  • The utility model provides a cross section camber ratio nonlinear distributed Marine propeller which can effectively delay the separation of the cavity bubble, and prolong the service life thereof.

    本实用新型就是提供一种可有效延迟空泡的分离,并可延长螺旋桨桨叶使用寿命的截面拱度比非线性分布式船用螺旋桨。

    youdao

  • The utility model provides a cross section camber ratio nonlinear distributed Marine propeller which can effectively delay the separation of the cavity bubble, and prolong the service life thereof.

    本实用新型就是提供一种可有效延迟空泡的分离,并可延长螺旋桨桨叶使用寿命的截面拱度比非线性分布式船用螺旋桨。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定