CPVC housed stem extensions are not intended for the horizon ball valve series.
CPVC封装的阀杆加长件并不用于水平球阀系列。
Chlorinated polyvinyl chloride (CPVC) piping system is ideal for process industry.
氯化聚氯乙烯是加工行业管道系统的理想选择。
The valve shall be provided with solder (-US), threaded (-UT), PEX or CPVC connections.
这种阀门应该具有焊接(-US)、螺纹(-UT)、PEX或CPVC等连接端口可供选择。
CPVC piping system is available with the whole system of pipes, fittings, valves and sheets.
CPVC管道系统包括管道、管件、阀门及板材。
This specification covers special engineered fittings or appurtenances for use in PVC or CPVC systems.
这种规定涵盖用于PVC或CPVC系统的特殊工程连接件或附属部件。
When the CPVC content was more than 60%, the thermal, flame-retardant and other properties were improved effectively.
只有CPVC含量大于60%,才能有效地改善共混物的耐热、阻燃等性能。
The shear rate of modified CPVC was higher than CPVC and the melt apparent viscosity was lower at the same shear stress.
相同剪切应力下改性CPVC的表观剪切速率大于CPVC,熔体表观粘度小于CPVC。
All pumps, piping, filter vessels, the rinse reservoir, and the housing must be made of 304 or 305 stainless steel or PVC or CPVC.
所有的泵,管路,过滤器,冲洗液循环槽及壳体必须用304或305不锈钢或PVC,CPVC材料制造。
And, if the extension is to be installed on a valve of material other than PVC or CPVC, that must also be specified when ordering.
如果加长装置安装在与PVC或CPVC不同的其它材料阀门上,在订购时也必须特别指定。
The CPVC values of a number of commonly used fillers are determined. The influence of fillers on the CPVC of latex paint is discussed.
用该法测定了几种常用填料的CPVC值,并探讨了填料对乳胶漆cpvc值的影响。
In this paper, the formulation and processing technology for CPVC thermal conductivity pipe produced by single screw extruder were investigated.
本文研究了适用于单螺杆挤出的氯化聚氯乙烯(CPVC)导热管的配方和工艺条件。
The manufacturer of all PVC or CPVC bleach ball valves must complete all components prior to the factory assembly, test, and packaging of those valves.
所有PVC或CPVC漂白剂球阀的制造商必须在进行工厂组装、测试和阀门包装之前全部完成所有的部件的生产。
The following table lists typical physical properties of PVC, CPVC and PP thermoplastic materials. Variations may exist depending on specific compound and product.
下列表格列出PVC,CPVC和PP热塑性塑料材料的主要物理特性。具体化合物和产品其物理特性可能会有些变化。
Thermal conductivity material was prepared with acrylate copolymer (acr) used as modifier for chlorinated PVC (CPVC) and superfine powdered graphite used as filler.
使用丙烯酸酯共聚物(acr)作为氯化聚氯乙烯(cpvc)的改性剂,使用超微细石墨粉体做填料,制备了具有导热性能的共混材料。
The UV Curing polyurethane (PUA) was blended with chlorinated polyvinyl chloride (CPVC) for Pervaporation membranes, which were used to separate ethanol water mixture.
将聚氨酯丙烯酸酯齐聚物(PUA)与过氯乙烯(CPVC)共混制成渗透汽化膜并用来分离乙醇水溶液。
Made of PP, PVC, CPVC, PVDF, stainless steel, titanium, they are corrosion resisting and have reasonable structure, both increase yield and decrease workers' Labour intensity.
用PP,PVC,CPVC,PVDF,不锈钢,钛制作,耐腐蚀。结构合理,既可增加产量,又减轻工人劳动强度。
Meanwhile, according to the different levels of chloride, CPVC chlorinated fiber modification can be used to create composite materials, foam materials, coatings and adhesives.
同时,根据氯化程度的不同,CPVC还可用于氯化纤维的改性、制造复合材料、发泡材料、涂料及粘合剂等。
(Chlorinated Polyvinyl Chloride) CPVC conforming to ASTM D-1784, Classification 23447-B, formerly designated Type IV, Grade 1, is a resin created by the postchlorination of a PVC polymer.
(氯化聚氯乙烯)CPVC符合ASTMD-1784,类别23447-B标准,以前定义为IV类别,等级1,是由PVC聚合物进行后氯化处理后产生的一种树脂。
Plastic packing material include: polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) and PVDF (PVDF), etc.
塑料填料材质包括:聚乙烯(PE)、聚丙烯(PP)、增强聚丙烯(RPP)、聚氯乙烯(PVC)、氯化聚氯乙烯(CPVC)及聚偏氟乙烯(PVDF)等。
For valves with CPVC or PEX end connections do not exceed the tubing manufacturers pressure and temperature ratings. Refer to the tubing manufacturers product specifications for that information.
对于配置CPVC或PEX连接端口的阀门,不要超过管道制造商额定的压力和温度。要了解有关信息,请参阅管道制造商产品规格说明。
For valves with CPVC or PEX end connections do not exceed the tubing manufacturers pressure and temperature ratings. Refer to the tubing manufacturers product specifications for that information.
对于配置CPVC或PEX连接端口的阀门,不要超过管道制造商额定的压力和温度。要了解有关信息,请参阅管道制造商产品规格说明。
应用推荐