• The functions and common varieties of coupling agent are introduced.

    介绍了偶联剂的作用和常用品种。

    youdao

  • The coupling agent may protect the interface against stress corrosion by water.

    偶联剂可保护界面免受水的应力侵蚀。

    youdao

  • The influences of adding coupling agent and its action mechanism were described.

    文中讨论了偶联剂的使用对复合材料的影响及其作用机理。

    youdao

  • New silane coupling agent can obviously improve the wetting of porcelain surface.

    试制陶瓷偶联剂可以明显改善瓷表面的润湿性。

    youdao

  • The treating effects of new coupling agent XOL -4 on different fillers were studied.

    研究了新型偶联剂(XOL-4)用于不同填料的效果。

    youdao

  • Treated by coupling agent, water resistance of the fine crosslinked starch was enhanced.

    经偶联剂处理,微细化交联淀粉的疏水性得到提高。

    youdao

  • The action mechanism of coal tar, coupling agent, resin and consolidating body was also discussed.

    还讨论了煤焦油、偶联剂、树脂与粘结体之间的作用机理。

    youdao

  • Ultrasonic coupling agent; Acoustic transmission medium; Health requirements; Biological evaluation.

    超声耦合剂;透声媒质;卫生要求;生物学评价。

    youdao

  • The results showed that triethoxy vinyl silane can be used as coupling agent of Sa (Sillimanite) and BMI composite.

    结果表明:乙烯基三乙氧基硅烷可用作硅线石和双马来酰亚胺复合体系的偶联剂。

    youdao

  • Before varnishing, substrate had to be treated with coupling agent 602 which was diluted to 2% in ethanol solution.

    在涂刷涂料之前,将602型偶联剂配制成2%的醇溶液直接涂覆于基材上可改善涂层的附着力、耐温性及耐腐蚀性能。

    youdao

  • Trypsin was immobilized on the Mesoporous Molecular Sieve MCM-41 with the aid of the coupling agent, glutaraldehyde.

    以介孔分子筛m CM - 41作为载体,戊二醛作为交联剂,对胰蛋白酶进行了固定化。

    youdao

  • The influences of zinc oxide crystal whisker, fumed silica and coupling agent on coatings performance were discussed.

    讨论了导电氧化锌晶须、气相二氧化硅和偶联剂对涂料性能的影响。

    youdao

  • The results showed that the compatibility of hollow glass bead and resin was improved by adding silane coupling agent.

    结果表明,硅烷偶联剂改善了空心玻璃微珠与树脂基体的相容性。

    youdao

  • After coating a substrate having heat resistance with a silane coupling agent, a layer having functionality is formed.

    在用硅烷偶联剂涂覆具有耐热性的衬底后,形成了具有功能性的层。

    youdao

  • The surface property of inorganic particles is modified by the coupling agent before they are added into the ABS resin.

    用硅烷偶联剂将几种常用的无机粒子进行表面处理后与ABS进行共混。

    youdao

  • The alkali treated rubber wood-flour was modified by silane coupling agent A-171 and MMA grafted natural rubber MGL-30.

    用硅烷偶联剂A- 171和天然橡胶胶乳(MGL - 30)改性碱处理后的橡胶木粉。

    youdao

  • Further, after coating a substrate having heat resistance with a silane coupling agent, a layer having functionality is formed.

    另外,在用硅烷偶联剂涂覆具有耐热性的衬底后,形成了具有功能性的层。

    youdao

  • Iron red replaced by red clay, titanate as coupling agent, F53-33 iron red phenolic anti-rust paint qualified has been prepared.

    用红土取代酚醛防锈漆中氧化铁红,辅以钛酸酯偶联剂,制出F53 - 33铁红酚醛防锈漆。

    youdao

  • The effects of silicane coupling agent on the properties of epoxy matrix composites filled with rigid shell powder were studied.

    以贝壳微粉为刚性填料,研究了硅烷偶联剂对贝壳微粉改性环氧树脂复合材料性能的影响。

    youdao

  • Octanol was grafted onto fir powder using TDI as coupling agent, then its application in PP composite materials was investigated.

    以甲苯二异氰酸酯(TDI)为偶联剂将正辛醇接枝到杉木粉表面,同时考察处理前后杉木粉填充PP复合材料的力学性能。

    youdao

  • The relationship between the concentration of coupling agent and the pull-out strength was investigated through the pull-out test.

    通过单丝拔出实验研究了偶联剂浓度与单丝拔出强度的关系。

    youdao

  • The laboratory and production compounding tests on silane coupling agent containing silica filled tread compound were carried out.

    对含硅烷偶联剂的白炭黑填充胎面胶料进行了小配合和大配合试验。

    youdao

  • The effects of content of glass fiber(GF), kind and content of coupling agent on the mechanical properties of GF/POM composite were studied.

    结果表明:偶联剂的加入,不仅使GF均匀分布在聚甲醛(POM)基体中,而且使复合材料的结构及性能有较大的改善。

    youdao

  • Varying the dosage of fillings, coupling agent, peroxide, and the mixing techniques, the UHMWPE composites were molded by compression molding.

    改变填料、偶联剂、过氧化物的用量及混合工艺对超高分子量聚乙烯复合材料实施模压成型。

    youdao

  • Varying the dosage of fillings, coupling agent, peroxide, and the mixing techniques, the UHMWPE composites were molded by compression molding.

    改变填料、偶联剂、过氧化物的用量及混合工艺对超高分子量聚乙烯复合材料实施模压成型。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定