Its advantages include high precision and productivity and low cost of machining.
既保证了加工精度,又提高了生产效率,还降低了加工费用。
It also can save energy, reduce the cost of machining, and increase the operation efficiency of...
并且能显著地节能,降低机械造价,提高系统的工作效率。
Therefore, machining technics is complex and requirement is high, which cause the cost of machining is high.
因此,传统栅式位移传感器制造工艺复杂,加工要求很高,相应地制造成本也很高。
It also can save energy, reduce the cost of machining, and increase the operation efficiency of the system...
并且能显著地节能,降低机械造价,提高系统的工作效率。
As more and more application of high property materials and decrease of machining term, high performance cutting methods are extensively studied recently for lowering the cost of machining.
伴随着高性能材料的越来越多的应用和加工周期的不断缩短,为降低制造成本,高效加工方法成为当前研究的热点。
Whether the tool path quality is good or bad will directly affect the machining and the machining cost of part.
刀具运动轨迹设计质量的好坏,将直接影响零件的加工质量及加工成本。
Familiar with cost analysis of machining foundry etc. technology.
熟悉机加、铸造等加工工艺的成本分析。
Proceed from design method to raise design efficiency, reduce machining cost, improve machining precision, advance emergency capability of enterprise.
从设计方法入手,提高设计效率,减少加工成本,提高加工精度,提升企业的应变能力。
As one of the advanced manufacturing technologies, high speed cutting technology can improve the machining quality and efficiency enormously, and can reduce machining cost.
作为先进制造技术,高速切削技术能大幅度地提高加工品质和加工效率,并能降低加工成本。
Whether the tool path quality is good or bad will directly affect the machining quality and the machining cost of parts.
刀具运动轨迹设计质量的好坏,将直接影响零件的加工质量及加工成本。
The machining cost of barrel cam is decreased by improving the CNC programming method for milling of barrel cam, and the method can meet the request of cam groove width precision.
通过改进圆柱凸轮数控铣削加工编程方法,降低了圆柱凸轮的加工成本并能满足凸轮槽宽的高精度要求;
Finally, with an example, it illustrated the dominancy of improving the efficiency of nc machining and cutting manufacture cost in multi-holes machining of the proposed methods.
最后通过实例验证此优化方法在孔群加工中明显提高了数控加工的效率、降低了加工成本。
The process plan is the technology foundation of part machining, and takes guidance for the part manufacture, and decides the productivity and the manufacturing cost of the part.
工艺方案是零件加工的工艺基础,对零件的生产制造过程起指导性作用,决定着零件的生产率和制造成本。
It is meaningful to take machining and cost during the calculation of torque, which provide a criterion in the design of hybrid stepping motor.
可见在转矩的计算中考虑加工和成本将给混合步进电机的设计提供一个有意义的判断依据。
Familiar with cost analysis of machining foundry etc. technology.
熟悉机加、造等加工工艺的成本分析。
The measures and solution for decreasing wire wear are proposed, which are significant to increase the precision of Micro-WEDM process, reduce the wire wear and cost of the machining process.
对进一步提高微细电火花线切割加工精度,减少电极丝的损耗,降低加工成本具有一定意义。
To produce dies of high quality and low cost within short period, integrated machining method and machining process must be required.
要做到在短的周期内生产出高质量低成本的模具,就要有较完善的加工手段和加工工艺方案。
Tool is one of the most important factors in the machining process. Tool wear can affect the quality, cost and the production rate of the product.
加工刀具是机械加工过程中最重要的加工要素之一,在加工过程中刀具的磨损必然会影响加工质量,加工成本及生产效率。
Honing with a honing gear is an efficient and low - cost method for hard gear machining, but it can not obviously improve the precision of gear.
外啮合珩齿工艺是一种效率高、成本低的硬齿面齿轮加工工艺,但对齿轮精度的提高有限。
Mechanical Finish Machining has the question of low productivity and high cost. Therefore, it can't satisfy the practical production.
由于目前的加工方法主要是机械光整加工,存在着加工质量差、生产率低、成本高的问题。
The processing cost is high for CNC equipment. With the processing of material parts as example, the text described two ways for improving CNC machining technique that can reduce the machining cost.
数控设备加工费用高昂,文章针对影响数控加工成本的因素,以具体零件的加工为例,讲述了两种改进数控加工工艺的方法,以达到降低加工成本的目的。
Due to low quantity demanded, the machine of Electrochemical Machining(ECM) is usually developed in single production, leading to long production cycle, repetitive design and high cost.
电解加工机床通常是根据用户具体需求单机生产,机床研制周期长、设计重复、成本高。
The research adopts existing and mature CNC technique which has advantage in price in producing the low cost CNC turning machine featuring the function of machining these special threads.
作者研究采用现有的、成熟的、有价格优势的数控技术,经过一些专门的处理,研发了具备加工这类特殊螺纹功能的低价专用数控车床。
This paper discussed a method of counterbore machining by using though-hole orientation to improve the efficiency of lower exact counterbore volume-produce and reduce the cost of corporation.
利用沉头孔通孔二次定位加工沉头孔盲孔的方法,可提高批量较大、精度要求较低的沉头孔加工效率,节约企业的加工成本。
The object function of the model is the sum of manufacturing cost and quality loss. The machining capability and function requirement were given as the restriction conditions.
该模型以制造成本与质量损失成本之和为目标函数,以加工能力和功能要求为约束条件。
The paper presents the technical economy assessment of CAPP system. Minimal sum of machining cost and quality loss cost is regarded as economical evaluation criterion of CAPP system;
研究CAPP系统的技术经济评价问题,提出将加工成本和质量损失成本总和最小作为CAPP系统的经济性评价指标;
We also design a novel UV collimator which makes infinite UV testing targets. It can reduce the difficulty of optical design and the machining cost, and utilize UV energy at maximum extent.
分辨率测试装置中采用非球面设计反射式平行光管,形成无穷远紫外分辨率目标,不仅减少了设计和加工成本,而且使紫外能量得到了最大程度的利用。
We also design a novel UV collimator which makes infinite UV testing targets. It can reduce the difficulty of optical design and the machining cost, and utilize UV energy at maximum extent.
分辨率测试装置中采用非球面设计反射式平行光管,形成无穷远紫外分辨率目标,不仅减少了设计和加工成本,而且使紫外能量得到了最大程度的利用。
应用推荐