The results show that the main factors of corrosive wear are electric chemistry and hardness.
试验结果表明：影响砂蚀磨损性的主要因素为电化学性能和硬度。
The linear relationship, with different slopes between corrosive wear and loads was confirmed.
结果表明载荷与腐蚀磨损间仍然存在线性关系。
There are five forms of wear and wear: abrasive wear, erosive wear, adhesive wear, fatigue wear and corrosive wear.
磨损有五种磨损形式：磨料磨损、冲蚀磨损、粘着磨损、疲劳磨损和腐蚀磨损。
The dependence of plating composition, structure and the behaviour of corrosive wear resistance on plating temperature is also discussed.
讨论了施镀温度对镀层成分、结构和抗腐蚀磨损行为的影响。
The modified austenitic manganese steel is suited for the operating condition of impact-corrosive wear, chisel-cutting wear and high stress wear.
改性奥氏体锰钢适用于冲蚀磨损、凿削磨损以及高应力磨损等工况条件下。
The paper analyses the heavy losses made by erosion corrosion and corrosive wear based on the definition, classfication and industrial background.
从定义、分类、工业背景几个方面分析了由腐蚀磨损和冲刷腐蚀所造成的巨大损失。
For corrosive environments, where dirt and abrasives may be ingested, and cause seals to wear faster than normally expected, the AFO offers the benefit of tie rod construction.
因为，腐蚀性环境中，灰尘和磨料可能摄入，并导致密封穿比通常预期的速度更快，踝足矫形器提供了拉杆工程受益。
When daily use will cause some wear and tear epoxy floor, so we must use some of the main issues, do not stress, do not use corrosive stuff, all kinds of forklifts, hydraulic car use frequency.
环氧地坪的日常的使用时会造成一些磨损和破坏，所以我们一定主要一些使用事项，不要重压，不要使用带腐蚀性的东西，各种叉车、液压车的使用频率等。
Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel.
比较两种材料试样在一定时间内的失重变化情况，表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。
Mechanical strength, machinability, surface corrosive and wear abrasion of a new type glass ceramic composed of fluorophlgopite Ca-mice were studied in this article.
研究了一种新型的钙云母为主相高强度的可切削玻璃陶瓷的力学性能、可加工性、表面耐腐蚀性、耐磨耗性。
LCHA with several variations of composition were tested with a modified MLD-10 wear tester to investigate their behavior under corrosive impact abrasion.
在改进的MLD - 10型冲击腐蚀磨损试验机上，对不同成分的低碳高合金钢的冲击腐蚀磨损性能进行了测试。
Under three different impact energy, LCHA with Mn in place of Ni were tested with a modified MLD-10 wear tester to investigate their behavior of corrosive impact abrasion.
在改进的MLD - 10型冲击腐蚀磨损试验机上，选择三种不同的冲击功，对以锰代镍的低碳高合金钢的冲击腐蚀磨损性能进行了测试。
The results show that the impact energy has great influence on the corrosive impact abrasion properties and wear mechanisms of the two steels.
结果表明，冲击功对两种钢的冲击腐蚀磨损性能和机制具有很大的影响。
The corrosive environment accelerates strongly crack growth of the composites. After acid and alkali treatment, the wear mechanism is the synthetic action of abrasive wear and fatigue fracture.
腐蚀环境对材料的裂纹扩展有较明显的加速作用，酸碱处理后材料的磨损机制主要是磨粒磨损和疲劳磨损的综合作用。
The effect of the oil temperature and the radial load on the corrosive-wear rate of the traditional tube and rod materials was studied by means of the corrosive-wear experimental tester.
笔者通过油井管杆磨蚀试验机，对常用的管杆材料进行了耐磨蚀性能对比实验，并探讨了油井温度、径向载荷等因素对常用管杆材料磨蚀率的影响。
Effect of polarization potential on the corrosion-wear behavior of high manganese steel in ore slurry was investigated by a self-made impact corrosive-wear tester.
通过自制的冲击腐蚀磨损试验机，施加不同极化电位对高锰钢在矿浆介质中的冲击腐蚀磨损行为进行了试验研究。
Super corrosion-resistant, super wear-resistant, super-resistant to erosion, grain fiber media, strong corrosive media the best choice!
腛超耐腐蚀、超耐磨损、超耐冲蚀，颗粒纤维介质、强腐蚀介质中的最佳选择！
Super corrosion-resistant, super wear-resistant, super-resistant to erosion, grain fiber media, strong corrosive media the best choice!
超耐腐蚀、超耐磨损、超耐冲蚀，颗粒纤维介质、强腐蚀介质中的最佳选择！
Products with high mechanical strength, hardness large, resistant to wear and tear, withstand high temperatures, chemical resistance. corrosive characteristics of the good.
本公司产品具有机械强度高、硬度大、耐高温、耐磨损、防腐蚀、绝缘性能好等特点。
Products with high mechanical strength, hardness large, resistant to wear and tear, withstand high temperatures, chemical resistance. corrosive characteristics of the good.
本公司产品具有机械强度高、硬度大、耐高温、耐磨损、防腐蚀、绝缘性能好等特点。
应用推荐