The result showed that excellent and stable vermicularizing effect could be obtained by using cored-wire injectio…
结果表明，喂丝法生产蠕墨铸铁，蠕化情况良好，蠕化率稳定。
The quality control of cored-wire injection process used for production of as-cast ferrite nodular iron was described.
介绍用喂线球化工艺生产优质铸态铁素体球墨 铸铁的质量控制要点。
The research process and application of the vermicularizing alloys used in the cored-wire injection process have been introduced in this paper.
介绍了喂线蠕化工艺所用蠕化剂的研制过程及应用效果。
In the present study, the microstructure and properties of iron aluminide intermetallic coatings in situ synthesized by cored wire and high velocity arc spraying (HVAS) were investigated.
采用粉芯丝材和高速电弧喷涂技术(HVAS)原位合成了铁铝金属间化合物涂层，并研究了涂层的显微组织和性能。
This paper has expounded the importance and urgency of self shielded flux cored wire (SSFCW) study.
介绍了自保护药芯焊丝的特点，并指出加快自保护药芯焊丝研制的重要性和紧迫性。
The technical and economical requirements for the cored wire used in nodular iron pipe production can be satisfactorily met by adopting orthogonal experimental method to determine its composition.
用正交试验方法确定包芯线的成分，使其在技术方面和经济方面能较好地满足球铁铸管生产的要求。
Compared with cored wire, the solid wires have not so good welding usability showing oxidized and crinkled weld appearance as the welding parameters are greater.
而对于实心焊丝，在较大焊接工艺规范下，很容易出现焊缝表面的氧化起皱，焊缝成型不良。
The drawing process of tubular flux-cored wire is different from common steel pipe because of flux core.
由于药芯的存在，管状药芯焊丝的拉拔不同于普通的钢管拉拔。
The producing methods of CG cast iron were discussed and pure magnesium and cored wire will be used as a main way to treat cost iron.
在列述蠕墨铸铁生产技术时，认为用纯镁及喂线法进行蠕化是今后获得蠕墨铸铁的主要方法。
Cored wire injection is a new technology for the production of ductile iron.
包芯线喂线处理生产球墨铸铁是一种新的球铁生产工艺。
The cored wire injection process was used to produce vermicular cast iron.
应用喂丝工艺生产蠕墨铸铁。
Technological process of CO2 gas shielded metal arc welding with stainless flux cored wire used for stainless steel tank construction is presented in this paper.
介绍了采用不锈钢药芯焊丝CO2气体保护焊焊接不锈钢储罐的工艺过程。
The result suggests that the coating of Al-based cored wire prepared by arc spraying has excellent high-temperature oxidation resistance and corrosion resistance.
研究结果表明：电弧喷涂铝基粉芯丝材制备的涂层具有优良的抗高温氧化和耐腐蚀性能。
The results showed that increasing the feeding speed, the amount of Ca-Fe cored wire and the diameter of the tundish nozzle can prevent blockage.
结果表明，提高喂线速度、加大喂线量和增加水口内径可避免水口的堵塞。
With austenitic welding material, solid wire, flux-cored wire and electrode, welded joint mechanical property of TCS ferritic stainless steel all can meet usability.
T CS铁素体不锈钢采用奥氏体型焊材，实芯焊丝、药芯焊丝和电焊条方法，焊接接头力学性能可以满足使用要求。
On average, metal-cored wires cost more per pound than other filler metals, particularly solid wire.
一般来讲，金属粉芯焊丝花费要高于常规焊材，尤其是实心焊丝。
However, in most cases, only the use of welding method, cored wire solder in the pin-hole-shaped tail.
但多数情况下，只能采用焊接的方法，将芯线焊在孔形插针的尾部。
A new type of maraging steel metal powder-cored wire for die TIG surfacing is developed.
研制了一种用于TIG模具堆焊的马氏体时效钢金属粉芯焊丝。
At the special request of the flux-cored wire welding underwater, the welding arc control system is developed.
根据药芯焊丝水下焊接的要求，研制了一套水下焊接电弧控制系统。
Introduced the result of nodularization-inoculation treatment for iron melt by using cored wire injection process in the Tenth Branch Company of Inner Mongolia no.
介绍了在内蒙一机集团第十分公司用喂线法对铁液进行球化-孕育处理的结果。
A new type of age hardening alloy metal powder-cored wire for TIG surfacing is developed.
研制了一种用于TIG堆焊的时效硬化工具合金金属粉芯焊丝。
Improvement of traditional computer skinned cored wire right foot hand way, evolving into a retreat before the folder.
改良传统电脑芯线剥皮右脚踏手拉方式，演进成前夹后退。
The formula of element original content in the cored wire has been proposed.
提出了药芯焊中合金元素总原始含量的计算公式。
Flux-cored wire is applied to the austenitic stainless steel pipe by back weld, MAG for the filling and cosmetic weld, at horizontal fixed round welding vertically up.
采用药芯焊丝对奥氏体不锈钢管道进行打底焊接，MAG焊填充及盖面焊，立向上的水平固定全位置焊接。
The transition coefficients of alloying from cored wire to deposited metal during CO2 GMAW have been studied in this paper.
研究了药芯焊丝在CO2保护电弧堆焊过程中合金元素的过渡系数。
A type of metal powder-cored wire with high hardness, wear-resistance and high toughness is studied in this paper.
本文研究了一种高硬度高韧性耐磨埋弧堆焊用金属粉型药芯焊丝。
The percentages of the flux composition in YJ657 basic flux cored wire which affected the welding technology of basic flux cored wires had been studied.
研究了YJ657碱性药芯焊丝药芯粉的成分配比对焊接工艺性能的影响。
Basic flux-cored wire for backing weld to T91 tube was studied in this paper.
研究了用于T91钢管打底焊的碱性渣系药芯焊丝。
Basic flux-cored wire for backing weld to T91 tube was studied in this paper.
研究了用于T91钢管打底焊的碱性渣系药芯焊丝。
应用推荐