A kind of ringed core pulling mechanism of injection die of plastic casing coupling is introduced.
介绍了塑料管套注射模的环形型芯抽芯机构。
A novel internal core pulling mechanism of injection mould is designed for the part with internal full circle undercut.
针对具有整圆内侧倒扣特征的注塑件，设计了一种新颖的注塑模内缩机构。
The design steps of injection mold for the shaver frame were introduced in detail, mainly introduced the slide core-pulling mechanism.
详细介绍了剃须刀头架注射模设计过程，重点介绍了滑块抽芯机构设计特点。
The design of the side core-pulling delay mechanism is stated in detail, The open-close action of the mould is simulated.
本文对延时侧抽芯机构设计作了详细阐述，并模拟了模具的开合运动。
The core-pulling mechanism can safely and reliably accomplish the core-pulling motions, and the quality of molded plastic products can meet the requirements of design and operation.
所设计的模具抽芯机构在实际应用中运动平稳，抽芯、复位准确，成型的塑料件质量符合设计和使用要求。
Designed a injection mold with two teeth threaded core-pulling mechanism for the objective slide.
针对物镜筒注塑件，设计了一种内收式二瓣牙内螺纹模具结构。
Hydraulic pressure core-pulling is adopted in this mechanism, and it can accomplish linear and arc directional core-pulling motions.
该机构采用液压抽芯，能完成弯管处的直线和弧线两个抽芯动作。
The injection mold structure of the front shell of large screen color TV is introduced, and design of side core-pulling large slide, improvement of ejector mechanism and gating method are introduced.
介绍大屏幕彩色电视机前壳注射模结构，重点介绍侧抽芯大滑块的设计，顶出机构和进浇方法的改进。
At the same time, introduce the principle of side core-pulling mechanism of gear and rack injection mold, and design gist of a rack.
掌握长抽距或斜抽芯塑件的结构工艺分析及抽芯距、抽芯力的计算，齿轮、齿条注射模侧向抽芯机构的原理和齿轮、齿条设计要点尤其关键。
The core-pulling mechanism with swing block was introduced, and an injection mold with swing block was designed.
介绍了摆动块内抽芯机构，并设计了摆动块内抽芯注射模。
Difficulty lies in mold design several key parts of the core pulling, this USES a bevel pillar core-pulling mechanism, and side slider pulling mechanism and so on.
模具设计的难点在于几个关键部位的抽芯，在此采用了斜导柱抽芯机构、和侧滑块抽芯机构等。
Adopted floating core and Angle guide pin core-pulling mechanism, production efficiency was high, it had a certain reference function to similar plastic mold.
采用浮动型芯及斜导柱抽芯机构，生产效率高，对同类注塑件生产提供了有益的借鉴。
If the casting is taken out from the moving die, long distance core pulling is needed according to the shape of the casting, so the mechanism of the sliding block which rotates midway was designed.
根据铸件形状特点，若在动模内取出铸件，需长距离抽芯，故设计了滑块中途自行转动机构。
The difficulty in the mould design is how to form a number of apertures in four side face by side core-pulling mechanism.
该模具设计的难点是四个侧面都需要通过抽芯成型多个侧孔。
A practical mechanism for the core-pulling of inside groove was presented. The core-pulling was achieved by applying the deformation of helical spring steel sheet during the ejecting process.
介绍了一种实用的内侧槽抽芯机构，可利用螺旋形弹簧钢板的顶出变形实现内侧抽芯，并阐述了抽芯机构的工作过程和关键技术。
Designing injection moulds for complex construction of plastic parts is a challenge; here is an example where conventional side core-pulling mechanism is unable to meet the requirement of forming.
塑料制品的复杂化给成型模具的结构设计带来困难，对于特殊塑料制品采用原有的侧抽芯机构难以满足塑件的成型要求。
The core-pulling mechanism can safely and reliably accomplish the core-pulling motions, and the quality of mol…
所设计的模具抽芯机构在实际应用中运动平稳，抽芯、复位准确，成型的塑料件质量符合设计和使用要求。
Dissertation was made on the structure characteristics and principle of the die-casting die with dog-leg CAM and angle-lift splits core-pulling mechanism.
给出了实用的弯销与斜滑块抽芯结构，论述了其结构特点和工作原理。
Using the side core-pulling mechanism and new orientation style of activity core to ensure the accuracy of hole locations, the qualified products can be produced.
采用了侧向抽芯机构、活动型芯的新型定位方式，保证了孔的位置精度，可生产合格的产品。
In the structural design, the article emphasis on the points of core-pulling mechanism of gear and rack design. The requirement of mold structures are compact and reasonable.
而在结构设计方面，重点阐述了齿轮齿条抽芯设计要点，模具结构紧凑，合理。
In the structural design, the article emphasis on the points of core-pulling mechanism of gear and rack design. The requirement of mold structures are compact and reasonable.
而在结构设计方面，重点阐述了齿轮齿条抽芯设计要点，模具结构紧凑，合理。
应用推荐