The coated composite nano materials with core-shell structures have recently become an increasingly important research branch in materials area.
具有核壳结构的包覆型复合纳米材料是最近几年材料科学前沿的一个日益重要的研究领域。
As a new kind of material, core-shell structure nanocomposite materials have become the focus of intensive research owing to their distinctive geometries, novel properties, and potential applications.
作为一种新型的材料，核-壳结构纳米复合材料由于其独特的结构、性质和巨大的潜在应用前景，引起人们广泛的研究兴趣。
Obvious core-shell structure could be seen in the particles.
具有明显的核壳结构，且呈规整的球形。
The magnetic nano-composite particle has a typical core-shell structure.
磁性纳米复合粒子具有典型的核壳结构。
Research progress of polysiloxane core-shell particles in recent years was reviewed.
综述了近几年聚硅氧烷核壳粒子的研究进展。
The study showed that PB-gPS latex particle is ball-like, and has a core-shell shaped structure.
利用TEM对PB-g-PS乳胶粒子进行了形态观察，接枝物为球形粒子，且具有核壳结构。
TEM showed uniform structured composite latex particle morphology and obvious core-shell structure.
TEM显示，复合乳胶粒子形态均匀规整，并呈现明显的核壳结构。
The formation of the hollow spherical structure was interpreted in terms of the core-shell mechanism.
利用核-壳机理初步解释了空心球结构的形成过程。
By modifying their surfaces such as preparing core-shell nanoparticles, many special properties can be obtained.
通过表面改性(如制备核壳结构的纳米粒子)可以使其获得更多特殊的性质。
A new gravimetric method for determining Cu and Sn in the core-shell Cu-Sn bimetallic nanoparticle was proposed.
探讨了测定核壳式纳米铜-锡双金属粉的各组分含量的重量分析法。
The latex with higher core T_g has more obvious core-shell structure, and the pencil hardness of the film is higher.
较高的核玻璃化温度则有利于形成明显的核壳结构乳胶粒子，且有助于漆膜硬度的提高。
The core-shell gold nanoparticle film is fabricated by using nanolithography and self-assembly monolayer technology.
采用纳米模板印刷术和自组装单层膜技术制造了芯壳结构的金纳米粒子膜。
Acrylate copolymer latex of core-shell structure with rich fluorine in shell was prepared using SDS and OP-10 as emulsifier.
以十二烷基硫酸钠和OP-10为混合乳化剂，制备了壳层富含氟的核壳结构丙烯酸酯共聚物胶乳。
The size and size distribution of core-shell particles, PBA as core and PMMA as shell, are studied by dynamic light scattering.
用动态光散射方法研究了以聚丙烯酸丁脂（PBA）为核、 聚甲基丙烯酸甲脂（PMMA）为壳的核壳双层纳米颗粒的粒径和粒径分布。
In this paper, the progresses on preparation of core-shell materials as well as the trend of composite technology were introduced.
作者介绍了目前以无机纳米粒子为芯核的核壳材料的制备现状，以及复合技术的发展趋势。
A room temperature film formation and low VOC acrylic finishing coatings has been prepared by core-shell structure emulsion polymerization.
用核-壳乳液聚合方法制备了室温成膜低voc丙烯酸类上光涂料。
Low temperature self-cross-linking formaldehyde-free binder for pigment printing is prepared by means of core-shell emulsion polymerization.
采用核壳乳液聚合的方法制备低温自交联的无甲醛涂料印花粘合剂。
The results show that the particle size of core is the principal factor affecting the coat effect of fine TATB-BTF core-shell composite particles.
结果表明，核粒大小是影响超细TATB - BT F核-壳型复合粒子包覆效果的主要因素。
New methods for the toughening of epoxy resin by rubber elastomers, thermoplastic resins, rigid particles and core-shell polymer particles are introduced.
介绍了环氧树脂增韧改性的新方法，即用橡胶弹性体、热塑性树脂、刚性粒子和核壳型结构聚合物来增韧环氧树脂。
During the last decades, there has been increasing interest in core-shell materials with unique functions due to its potential in developing novel materials.
几十年来，核壳功能性材料因具有很大的发展潜力而引起人们广泛的兴趣。
Particulate of graphite electrode wastes from an electric-carbon materials factory was formed "core-shell" negative materials by chemical deposition coating with medium pitch.
以大功率石墨电极废品破碎后的微粒为“核”，以中温沥青为包覆原料，经化学沉积包覆形成“核-壳”型锂离子蓄电池负极材料。
When the mass fraction of the homopolymer in blends reaches 33.3%, the "core-shell" structure, similar to the micelles, can be clearly observed in the polystyrene (PS) matrix.
当均聚物质量分数增大到33.3%时，在聚苯乙烯（PS）连续相中形成了类似胶束的“核-壳”结构。
Due to their uniform size and regularity in the structure, core-shell structure composite nanoparticles will exhibit unique properties in electromagnetism, optics and mechanism.
统一尺寸、结构上有序包覆的核壳型复合材料，具有高折射率以及独特的电磁、光学和机械性质。
Coated powder materials with particular core-shell structure have excellent properties of both core material and shell material, more homogeneous structure and particular functions.
具有核壳结构的包覆复合粉体材料，兼有包覆层材料和被包覆粉末材料两种物质的优良性能，获得了更加均匀的组织结构和特殊功能。
This dissertation mainly studies on the preparation of polymeric-inorganic composite microspheres of core-shell structure based on template method of polymeric hydrogel microspheres.
本论文主要对基于高分子水凝胶微球为模板制备有机—无机复合材料进行了研究。
TEM analysis indicates that the composite particles show a core-shell structure, and the particle sizes of PU substrate have great influence on the morphology of composite particles.
透射电镜分析表明，复合粒子呈核壳结构，聚氨酯乳胶基材的粒径大小对复合粒子的形貌有较大影响。
The importance of surface modification and modification methods are briefly stated. And the preparation of core-shell nano-material is an important technique for surface modification.
简述了纳米微粒表面修饰的重要性以及修饰方法，并指出制备核壳型纳米材料是一种重要的表面修饰方法。
The present invention discloses an aqueous coating composition comprising 5 to 95 wt. % of an alkali-swellable core-shell addition polymer (I), and 95 to 5 wt. % of a polyurethane (II).
本发明公开了一种水性涂料组合物，包含5 - 95重量%碱可溶胀的核-壳加聚物(I)和95 - 5重量%聚氨酯(II)。
By using a new emulsion making technique, a core-shell AgX emulsion for color negative red-sensitive layer was prepared successfully with photographic characteristics significantly improved.
采用新型乳剂制备技术，研制出彩色底片感红层核壳型乳剂，其照相性能得到明显的改善。
This paper reviewed the recent years' studies on macromolecular materials toughened by thermoplastic resins, core-shell latexes, liquid crystal polymers or inorganic rigid particles, respectively.
对近些年来热塑性树脂增韧体系、核壳粒子增韧体系、液晶高聚物增韧体系及无机刚性粒子增韧体系等增韧高分子材料的研究进展进行了综述。
应用推荐