The common method of enhancing the efficiency is given, such as decreasing the iron loss, copper loss and machine loss.
从降低电机的铁耗、铜耗和机械损耗着手,给出了提高电机效率的一般方法。
The distributed heat source is first calculated by a tight coupled field-circuit method, including eddy current loss, iron loss and copper loss.
首先用场路紧密耦合方法分析电机的分布热源,包括涡流损耗、铁损和铜损。
The results indicate that firstly, increasing the diameters of discrete matte droplets in slag is an important means to reduce copper loss in slag;
结果表明:增大熔体中离散态分布的锍液滴直径是降低渣中铜夹带损失的重要措施;
It features the maximum utility ratio of the core window areas and can reduce the copper loss and improve the heat dissipation of the integrated magnetics.
该结构的主要特点是实现了磁芯窗口面积利用率的最大化,可降低集成磁元件的铜损和改善其散热条件。
In order to implement an energy-saving method which keeps iron loss equal to copper loss using variable-voltage in light load, induction motor parameter identification at any moment is a key problem.
对于轻载调压使铜损等于铁损的这一节能方法而言,在线辨识出电机的参数是一个关键点。
A mathematical model of heat loss of high temperature smoke vented from rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
根据能量平衡原理,建立了基于预热燃烧风富氧下铜精炼阳极炉高温烟气热损失数学模型,并根据富氧燃烧风对铜精炼阳极炉氧化期高温烟气热损失数学模型进行计算。
Copper on multi-layer panels can be measured with no loss of accuracy!
铜对多层面板可以衡量的,没有丧失准确性!
The loss of copper in electric furnace slag during flash smelting operation is described.
介绍了在闪速熔炼过程中,铜在电炉渣中的损失状况。
The loss of tin in the sulphide copper concentrate was less than 4%.
同时锡在铜精矿中的损失也不到4%。
Since the main active component is copper, removal of the polymers by traditional burning method might cause complete loss of the activity.
对催化剂的活性表面高聚物的有效去除是催化剂再生的关键。该类催化剂主要活性成分为铜,常规燃烧方法会使催化剂活性损失殆尽。
By means of weight loss method, effect of descaling agents GN-1 and GN-2 on corrosion of red copper and carbon steel was studied under dynamic and static conditions.
采用静态、动态失重法研究了GN 1和GN 2除垢液对紫铜、碳钢试片的腐蚀,试验了有无缓蚀剂存在等条件下的腐蚀情况。
The utility model has the advantages of small volume, copper and iron saving, low loss, low noise, low cost, good index of performance, etc.
本实用新型的优点是,体积小,节省铜铁,低损耗,低噪声,成本低,性能指标好等。
The copper, lead and cadmium were determined by FAASsuspension sample introduction technique without sample digested, that avoided the sample pollution and loss, the process is simplified greatly.
直接悬浮进样石墨炉原子吸收法测定铜、铅和隔,样品不用消化,极大地简化了步骤,避免了样品的污染和损失。
A mathematical model of heat loss of high temperature smoke vented from rotary anode furnace in copper refining based on warm-up burning air was established based on principle of energy balance.
根据能量平衡原理,建立了基于燃烧风预热下铜精炼阳极炉高温烟气热损失数学模型,并根据不同预热燃烧风温度对铜精炼阳极炉氧化期高温烟气热损失数学模型进行计算。
The corrosion performance of tubes of copper and 304 stainless steel in ammonia solutions with different ammonia concentration are studied by electrochemical polarization and weight-loss method.
采用电化学极化和失重法研究了纯铜管、304不锈钢管于开口、低氧密闭两种状态下在不同浓度氨溶液中的腐蚀性能。
The invention can reduce signal loss of copper foil cladding substrate, improve signal transmission speed and reduce production cost.
本发明可降低覆铜箔基板的信号损失,提高 信号传播速度以及降低生产成本。
Unique ultra pure copper mirror, low reflection, heat loss is small.
特有超纯铜镜面,低反射,热损小。
The effect of copper on the corrosion resistance of Cr-Mn stainless steel in H2SO4 was analyzed by means of weight-loss method, electrochemical polarization curves, SEM, EDS and XRD.
采用失重法、电化学极化曲线法、SEM、EDS、XRD等分析手段,分析了铜对铬锰不锈钢耐蚀性的影响及其机制。
The effect of copper on the corrosion resistance of Cr-Mn stainless steel in H2SO4 was analyzed by means of weight-loss method, electrochemical polarization curves, SEM, EDS and XRD.
采用失重法、电化学极化曲线法、SEM、EDS、XRD等分析手段,分析了铜对铬锰不锈钢耐蚀性的影响及其机制。
应用推荐