The influences of different particles and different link of fabricating technology on electrical conductivity of copper - matrix composites were studied.
研究了不同增强颗粒、制备工艺的不同环节对铜基复合材料导电性能的影响。
SEM analyses shown that the copper film made by the technique on the surface of the microsphere is uniform, and its adhesion with the matrix material is strong.
SEM分析表明，本工艺制得的微球表面铜沉积层厚度均匀，与基体间结合牢固。
Copper conductive adhesives were prepared using epoxy as matrix, the mixture ofm-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the conducting filler.
以环氧树脂为基体，间苯二胺和二氨基二苯甲烷的低融点混合物为固化剂，铜粉为导电填料，制备了热固化各向同性导电胶。
With the increase of copper oxide content in silver matrix, the density and the electric conductivity of AgCuO materials tended to decrease.
两种方法制备的银氧化铜材料随着氧化铜含量的升高，材料的致密度、导电性均呈下降趋势。
Interface characteristics of carbon fiber reinforced copper matrix composite materials with various interface states and their effect on the flexural strength of the composites had been studied.
研究了三种不同界面结合状态(机械结合、溶解结合、反应结合)的碳纤维增强铜复合材料的界面结构及其对复合材料弯曲强度的影响。
The mechanical and physical properties of particles reinforced copper matrix composites for heat sinks produced by powder metallurgy are studied here.
本文研究了用常规粉末冶金工艺制备颗粒增强铜基热沉复合材料的机械物理性能。
The friction and wear tests of the self lubricating bearing made of carbon fiber reinforced copper matrix composite materials are arranged by uniform design that can greatly reduce the test duration.
根据均匀设计原理，对碳纤维增强铜基复合材料的磨损试验参数予以科学排列，不仅减少了试验次数，而且提高了试验数据统计结果的可靠性。
A novel technology of acidic electroless copper plating on steel matrix was studied in this paper.
研制了一种新型的钢铁基件酸性化学镀铜工艺技术。
Note: We can manufacture the products upon special requirements of clients, and thickness, rigidity of copper matrix and tin coating thickness can also be adjusted upon the requirements of clients.
备注：其它规格可以按客户特殊要求加工定做，铜基厚度、铜基硬度和锡层厚度可以按用户要求调整。
In this paper, the surface treatment of carbon fiber and the research progress on the fabrication and properties of the carbon fiber reinforced copper matrix composites are introduced.
介绍了炭纤维的表面处理，炭纤维增强铜基复合材料的制备工艺与性能的研究进展。
The abrasion wear mechanism of Mn copper-nickel alloy matrix-cast chromium carbide composite was studied.
研究了真空熔铸法制备的锰白铜基铸造碳化铬复合材料的二体磨料磨损机理。
The progress in the study of cyanide-free copper electroplating on steel matrix is introduced according to different valences of copper in the deposition process.
按照沉积过程中铜的价态的不同对在钢铁基体上无氰碱性镀铜的研究进展进行了说明。
The visible spectrum characteristics of the copper matrix and component in Cu-based alloy were(studied) with computerized digital simulation processing technique.
对铜合金可见光谱线进行了计算机数字模拟处理，研究了基体元素铜和各成分元素的可见光谱特征。
The more the content of residual copper in steel, the more severely the oxidation corrosion occurs on grain boundary and matrix, the greater the hot brittleness tendency;
残余铜含量越高，晶界与基体界面氧化腐蚀越严重，热脆性倾向越大；
Copper conductive adhesives were prepared using epoxy as matrix, the mixture ofm-phenylenediamine and diaminodiphenylmethane as hardener, and copper particles as the con-ducting filler.
以环氧树脂为基体，间苯二胺和氨基二苯甲烷的低融点混合物为固化剂，铜粉为导电填料，制备了热固化各向同性导电胶。
Interfacial strength would be increased between carbon nanotubes and metal-matrix through electroless plating a continuous layer of copper on carbon nanotubes.
通过化学镀在碳纳米管表面镀上一层连续的铜镀层，以改善碳纳米管与金属基体的润湿性，增强界面结合力。
A method for the determination of gallium by the tantalum foil-lined graphite furnace atomic absorption spectrometry with vanadium and copper as mixed matrix modifier has been investigated.
提出用钒和铜混合基体改进剂衬钽管石墨炉原子吸收测定镓的方法。
The effects of rare-earth elements and zinc on copper matrix slider made by powder metallurgy are investigated.
研究稀土和锌对铜基粉末冶金滑板的影响。
The two body abrasion wear characteristic of Mn copper nickel alloy matrix cast tungsten carbide composite has been studied using high chromium cast iron as a reference material.
以高铬铸铁为参考材料 ，研究了真空熔铸法制备的锰白铜基铸造碳化钨复合材料的二体磨料磨损特性。
The two body abrasion wear characteristic of Mn copper nickel alloy matrix cast tungsten carbide composite has been studied using high chromium cast iron as a reference material.
以高铬铸铁为参考材料 ，研究了真空熔铸法制备的锰白铜基铸造碳化钨复合材料的二体磨料磨损特性。
应用推荐