Affect the melt flow rate and the cooling speed.
会影响熔体的流动性和冷却速度。
Fast cooling speed was the main reason of generating cold crackle.
认为冷却速度过快是产生冷裂纹的主要原因。
Using the method of program cooling speed is slow, has small damage to the cells.
程序降温法降温速度较缓，对细胞的损伤小，保存的长期性和安全性均可得到保障。
The impact toughness decreased with decreasing the cooling speed of quench and temper.
结果表明：随着淬火和回火冷却速率的减慢，材料的冲击韧度下降；
The cooling speed gradient leads to a gradually changed microstructure of the fused materials.
依冷凝速率梯度不同，该组成样品可以获得显微结构渐变的熔融材料。
The higher the cooling speed, the thinner the strips are, and the lower the susceptibility of embrittlement.
液淬速率愈高，条带厚度愈小，其脆化敏感性愈低。
The ratio of acicular ferrite may increase by raising cooling speed and decreasing final cooling temperature.
提高冷却速度和降低终冷温度可以增加针状铁素体的比例。
When fast quench and temper cooling speed are adopted at the same time, the high impact toughness will be gotten.
淬火和回火同时快冷可以获得较高的冲击韧性。
The influence of various cooling speed on structure and property of wire bar of SCM435 cold heading steel is researched.
研究了不同冷却速度对SCM 435冷镦钢盘条组织性能的影响。
We are looking for a cooling speed slow solution, design program cooling box, to realize quick economic programmed cooling.
现制作一种简易的程序降温盒，以实现便捷经济地程序降温。
The results show that shearing rate, solid rate and cooling speed have great effects on apparent viscosity of semi-solid AZ91D slurry.
结果表明：剪切速率、固相率和冷却速度对半固态浆料的表观粘度都有很大的影响。
The hardening case depth and hardness curve can be changed by adjusting heating time, heating power and cooling speed during induction hardening.
在感应淬火中，通过改变加热时间、加热功率和冷却速度可以改变淬硬层深度和硬度梯度。
The influence of rolling temperature, final cooling temperature, cooling speed and micro-alloying on microstructure and properties were investigated.
本文分析了轧制温度、终冷温度、冷却速度以及微合金化对钢筋组织、性能的影响。
The influence of heating temperature, forging-ending temperature and cooling speed on the mechanical properties of untempered 45v steel is investigated.
研究了加热温度、终锻温度、冷却速度对45V非调质钢力学性能的影响。
The result shows that the inclusion, high cooling speed and uneven of cooling speed after rolling are the main reasons for steel plate cold bending rupture.
结果表明，钢板中有较多的非金属夹杂物及轧后冷却速度过快和冷速不均匀是导致冷弯性能不合格的主要原因。
Measures were taken to prevent welding cold cracking such as improve welding technology by decreasing cooling speed and adopting low-hydrogen electrode, etc.
通过改进焊接工艺来降低冷却速度和采用低氢型焊条等措施来控制焊接冷裂纹的产生。
The result shows that high cooling speed is the main reason of reforming the crack. Meanwhile, the countermeasures were put forward and good effect was obtained.
结果表明，裂纹的产生是由于车轮辐板在热成型中受到强烈的冷却影响所致，从而采取了相应的改进措施，取得了较好效果。
The source of PT acid in PTA, the crystal principle of PT acid and PTA, the variable factors cooling speed and solvent ratio in the crystal process were analysed.
分析了PTA中PT酸的来源，PT酸与PTA结晶过程的结晶原理，结晶过的可变因素冷却速度和溶剂比。
The effect of heating temperature and cooling speed on the micro-structure and mechanics characteristics of high-carbon-steel wire normalized was studied in this paper.
研究了加热温度和冷却速度对高碳钢正火钢丝的显微组织和力学性能的影响。
In this article, a thorough investigation has been conducted into heating rate, holding time and cooling speed in an effort to work out an optimum ingot annealing process.
本文对铸件退火时如何控制加热速度、保温时间、冷却速度进行了充分的研究和探讨，为合理制定铸件退火工艺指出了方向。
The utility model has the advantages of simple structure and convenient utilization, being capable of increasing the cooling speed of hot water and reducing waiting time for drinking.
本实用新型结构简单、使用 方便、能加快热水降温速度，缩短饮水等待时间。
The expanding curves and continuous cooling transformation curve (dynamic CCT curve) of X60 pipeline steel were obtained by dilatometry and microscopic test under different cooling speed.
利用膨胀法，结合金相法，测定了X60不同冷却速度下连续冷却转变的膨胀曲线，获得了该钢的连续冷却转变曲线（动态CCT曲线）；
Comprehensively optimal design plans for the conventional controlled atmosphere furnace were proposed to counter its bad temperature uniformity, low automatic control level and low cooling speed.
针对传统气氛炉的温度均匀性差、自动化程度低、冷却速度慢等一系列问题提出全面优化设计方案，并取得了良好的效果。
Standing still and cooling his brow, he saw a boy running down the hill at topmost speed.
他站着一动不动，冷却着发热的额头，看见一个男孩以最快的速度从山上跑下来。
Well, the concept revolves around the idea that the basic shell or infrastructure should provide the bare necessities: power, networking, management, a high-speed bus, cooling, and storage.
这个概念围绕一个理念，即基本外壳或基础架构应该提供一些基本需求：电源、联网、管理、一条高速总线、冷却设备、以及存储器。
Additional bracing, extra cooling ducts and special aerodynamics are fitted to the Super Sport, so that safety and stability are not sacrificed for top speed.
此外，还配备了额外的支撑装置，冷却管道和特殊的空气动力学系统。所以，威龙的高速并没有以牺牲安全性和稳定性为代价。
Hollow tapered roller bearings available oil cooling roller, so that temperature rise reduced, thereby increasing the speed allowed.
空心圆锥滚子轴承可用油冷却滚子，使温升降低，从而提高了允许的转速。
The investigation is done to the measuring method of the persian blinds airflow direction and speed at the inlet of cooling wind chamber of high speed power car.
对高速列车动力车冷却风室进风口处百叶窗空气流向、流速实车测量方法进行了研究。
But Controled cooling USES temperature control, time control on the whole line and speed of rolling.
而控制冷却可采用全线的温度控制、时间控制、轧制速度来实现。
But Controled cooling USES temperature control, time control on the whole line and speed of rolling.
而控制冷却可采用全线的温度控制、时间控制、轧制速度来实现。
应用推荐