The converter is getting run so much that response times are slow, so you persuade your manager to buy a more powerful machine to host your service.
转换器运行频率非常高，而导致其响应时间延长，因此您劝说经理购买更为强大的计算机来承载您的服务。
Maintenance department: maintenance industries circuit boards, machine equipment system, main board, controller, power supply, frequency converter, PLC and touch screen.
维修部：维修各行业电路板，机加工设备系统，主板，控制器，电源，变频器，PLC触摸屏等。
The circuit design mainly includes interface designs, such as address coding circuit, human-machine, AD converter, etc.
电路设计主要包括译码电路设计，人机接口电路设计，AD转换电路设计等。
Proficient in PLC programming (Siemens), human-machine interface touch screen, frequency converter, servo driver, stepper motor.
精通PLC编程（西门子、三菱），人机接口触摸屏、变频器、伺服驱动器、步进电机。
The application and maintenance of single phase input converter DV700T1500 produced by Panasonic in improving multitool dicing machine are described.
主要介绍松下公司生产的DV 700t1500型单相输入的变频器在多刀切割机改进中的应用及其维护保养措施。
We have finally found a converter for the electric wave therapy machine. Dr.
我们终于找到了一个能够让理疗仪正常运转的电压转换器。
Abstract: : This paper introduces working principles balancing machine and converter with balancing machine wiring diagram. it's positing add-subtract speed parametric and run mode of operation.
摘要：本文简要介绍平衡机工作原理及变频器与平衡机接线图，并论述加减速参数的设定及运行操作方式。
The system consists of microcomputer and transient wave converter etc For the measurement of working parameters of drilling machine such as impact energy or frequency, stroke and pressure.
本研究系采用微型计算机、波形存贮器等技术装备组成了凿岩机械冲击能、冲击频率、行程、压力等工作参数的微机测试系统。
The principle of electromechanical energy conversion is the basic principle of electromechanical energy converter and an important tool for rotating electrical machine analysis.
机电能量转换原理是机电能量转换装置共同遵循的普遍规律，是研究和分析旋转电机的重要工具。
This paper introduces the application, transform plan and result of F1000 universal converter in economic CNC machine tools transformation.
本文介绍了惠丰F1000通用变频器在改造经济型数控机床中的应用情况、改造方案和应用效果等。
In metallurgical industry and in machine building industry, any steel making process (converter or electric steel furnace) needs to control the variation in molten steel composition and temperature.
冶金和机器制造工业的炼钢(转炉、电炉)过程中，需要控制钢水温度的变化。
The machine and converter remain in the safe operating state, the stability and the security of system is thus enhanced.
在电网故障时使电机和变换器安全穿越故障，保持不脱网运行，提高系统的稳定性和安全性。
This article makes a tentative discussion on the operating principle of 5 - roll unbending machine of the new converter continuous caster in GISE.
本文对广钢新转炉连铸机五辊拉矫机矫直原理进行了初步探讨。
Man-machine interface, programmable controller, tem-controller and frequency converter are of import brand.
人机界面、可编程控制器、温控模块、变频器采用进口产品。
A spinning machine, especially a ring spinning frame, includes at least one driver started via one frequency converter and one central control unit for starting the frequency converter.
一种纺纱机，特别是一种环锭细纱机，包括至少一个能通过一变频器启动的驱动和一用来启动变频器的机器中央控制单元。
Main transmission device: the main transmission device adopts electrician converter of Shenzhen Huichuan to control the vector electric machine, transferring each group of printing blocks.
主传动机构：主传动采用是深圳汇川矢量变频器控制矢量电机，传动每组印版。
The coarse grating linear displacement measuring Sensor has many advantages. But only with a numerical control converter, it can be interfaced with current NC machine tools.
粗光栅线位移传感器有很多优点，必须加上数控转换器后，才能与流行的数控系统接口。
This paper introduces the Converter applied in high-speed grinding machine and the soft, hardware design of inverter.
本文简介了变频器在高速磨床上的应用及逆变器的软、硬件设计。
This paper will focus on the math model and control method of an induction machine based four ports electromechanical converter (EVT).
本论文主要就感应式四端口机电能量变换器（EVT）的数学模型以及控制方法展开研究。
This is a doubly-fed machine no-load cases, the rotor side converter control circuit.
这是双馈电机空载情况下，转子侧变流器的控制电路。
Matrix converter is designed based on VSCF doubly-fed machine wind generation system.
设计了基于矩阵变换器的双馈电机变速恒频风力发电系统。
Gear system besides Double frequency converter controller, making machine simpler operation and more stable when high-speed working.
整机为双变频控制的基础上添加了齿轮传动系统，使整机操作简单、高速运行更加稳定。
Basing on PROFIBUS to design electrical system of rewind wire arranging of stranded wire, the system is made up of PLC, human machine interface (HMI), dc-to-ac converter and so on.
基于PROFIBUS现场总线，设计出钢绞线复绕排线电气系统，该系统由PLC、人机界面(HM I)、逆变器等构成。
According to the Urgent requirement of smelter production, the USG2model 50t cleaning machine for converter outlet, which is the first one in China, was developed.
根据冶炼厂生产的迫切需要，研制成国内首创的USG—2型50吨转炉炉口清理机。
The advanced development process flow of "converter-small billet continuous casting machine-high speed wire rod mill" is adopted in developing EH14 wire rod for weld.
青钢应用“转炉-小方坯连铸机-高速线材轧机”工艺流程试制EH14焊接用钢盘条。
This paper introduced the design of a TIG welding machine, which is used for six PTP(point to point) assembling welding of the Hydraulic Torque Converter.
介绍了一种用于液力变矩器总成焊接的六点TIG焊专机控制系统。
The components of direct drive wind power converter control system, grid side and machine side converter control strategy is given in this paper.
本文首先简要介绍了直驱风力发电变流控制系统的组成、网侧和机侧变流器的控制策略。
Siemens PLC S7-200 as the control center, Anchuan F7 frequency converter as the implementation devices, it realizes changing frequency velocity modulation control for automatic washing machine.
以西门子PLCS7- 200为控制核心，以安川f 7变频器为执行装置，实现全自动洗衣机的变频调速控制，比以往的定频调速控制系统有着很多的优势。
Siemens PLC S7-200 as the control center, Anchuan F7 frequency converter as the implementation devices, it realizes changing frequency velocity modulation control for automatic washing machine.
以西门子PLCS7- 200为控制核心，以安川f 7变频器为执行装置，实现全自动洗衣机的变频调速控制，比以往的定频调速控制系统有着很多的优势。
应用推荐