The temperature distribution in the cutting zone of laser-assisted machining is similar to conventional machining.
激光辅助切削的切削区温度分布与常规切削相近；
The MHD stirring chamber is fabricated with ordinary brass and polycarbonate plate by conventional machining method.
该小型电磁动力混合器由聚碳酸脂和黄铜采用常规机械加工方法加工而成。
The results show that the main cutting force and radial force decreased by 23.5% and 19.9% compared with conventional machining.
结果表明，激光辅助切削的主切削力和径向力分别比常规切削下降了23.5%和19.9%；
The surface flaws and residual stresses which can be introduced by both conventional and non-conventional machining methods are discussed.
讨论了采用传统加工方法和特种加工方法可能产生的表面缺陷和残余应力。
Extreme manufacturing covers various extreme machining and ultra precise machining in comparison to conventional machining parameters and accuracy.
极限制造是指与常规加工参数及加工精度相比的各种极限加工和超精密加工。
As failure mechanisms of cutting tools in HSM is different with those in conventional machining, new theory and research method should be presented.
高速切削时，刀具具有不同于普通切削的失效机理，需要新的理论和方法来进行研究。
And the current machining methods of these materials are divided into two parts: conventional machining processes and non? Conventional machining processes.
目前该类材料的加工方法主要采用普通切削加工和非常规机械加工两大类。
The turning process of carbon-graphite M104 seal ring is focused, and the comparative experimental study on conventional machining and laser-assisted machining are performed.
针对碳石墨M104密封环的车削加工过程，进行了常规切削和激光辅助切削的对比实验研究；
However, it is difficult to machine this material in conventional machining methods because of its high hardness and brittleness as well as inconductvity, thus restricting its application area.
但由于硬度高、脆性大、大多数陶瓷材料不导电，传统的机械加工方法难以加工，使用范围受到限制。
Applications: Conventional machines, boring machines, milling machines, tapping machines, special production transfer machines, drilling and punching machines, machining centers.
应用：常规机械、镗床、铣床、攻丝机、特殊产品转移机械、钻孔和冲孔机、加工中心。
In the following section, we discuss the various machining operations that can be performed on a conventional engine lathe.
在下面这节中，要讨论的是能在传统普通车床上进行的各种机加工作业。
Conventional acceleration and deceleration control method plans velocity in single segment of machining path, so it can not meet the need for high speed.
传统的段内加减速控制方法由于整体速度偏低，不能适应高速加工的需要。
The scheme can control the conventional cutting as well as antarafacial machining of the complex work.
指出此加工方案能控制常规锥度切割，同时也能加工复杂的变锥度异面工件。
The state of tool workpiece contact zone in Electric Hot Machining (EHM) is different from that of conventional cutting.
导电加热切削时，刀工接触区的状态与常规切削的不同。
The wear form of cutting tools in electric hot machining (EHM) is different from that of conventional cutting due to strong electric and thermal effects.
导电加热切削时，由于强烈的电热效应，刀具磨损形态与传统切削加工方法有所不同。
The state of circuit of tool and workpiece in Electric Hot Machining (EHM) is different from that of conventional circuit.
导电加热切削时，刀-工导电回路的状态与常规的电流回路有所不同。
Contactless inductive power transfer system with conventional inductive technology was researched and a design method was presented after applying it to ultrasonic vibration machining system.
利用传统电磁感应理论研究了无接触感应电能传输系统和应用在超声振动加工系统中的设计方法。
Services include short and long run production on conventional and CNC equipment, general machining and prototypes.
服务范围包括传统和CNC设备长短期生产，通用加工和原型设计等。
Simulation results show that the designed system is of fast response, non-overshoot and it is more effective than the conventional adaptive control of machining process based on neural network.
仿真结果表明，该系统响应快，无超调，比传统的加工过程神经网络自适应控制具有更好的控制效果。
New cutting and machining processes continue to emerge along with methods for modifying the conventional techniques.
新切割和加工流程不时涌现跟着批改办法传统的制造工艺。
Machining of ceramics processed by ultrasonic vibration-turning is experimentally compared with that through conventional turning and grinding.
进行了超声振动车削与普通车削、磨削加工陶瓷材料的对比试验研究。
Metal cutting, the conventional method of mechanical machining, develops toward high-speediness, high precision and automation.
切削加工是机械加工最基本的加工方法。
Features: generally applied to process the conventional materials with rigidity HRC46-65, and tensile materials, also suitable for high-speed machining and precision processing.
特点：通用于加工硬度在HRC46- 65的常规格材料以及拉伸材料，也适用于高速加工和精细加工。
Processing equipment: CNC milling, Carving, Electrical sparkle, linear cutting, driller, Grinder, Conventional Milling CNC Machining Center.
加工设备：数控铣，精雕，电火花，线切割，钻床，磨床。
The remarkable difference between powder-mixed EDM and conventional EDM is that electric powder suspended in working fluid plays an important role in machining process.
由于混粉电火花加工技术与普通电火花加工技术的最大区别是在工作液中添加的导电性粉末参与放电，粉末的存在对加工效果有重要的影响。
Deterministic optical machining method improves the accuracy and the efficiency of optical machining compared with conventional optical manual fabrication.
相对于传统光学手工加工，确定性光学加工大幅提高了光学加工的精度和效率。
The high speed machining method has part cutting speed as high as about 10 times that in conventional cutting.
以高于常规切速10倍左右的切削速度对零件进行高速加工。
The high speed machining method has part cutting speed as high as about 10 times that in conventional cutting.
以高于常规切速10倍左右的切削速度对零件进行高速加工。
应用推荐