Dehumidification drying Combined with conventional drying is the main trend in future, which can improve both energy-saving and drying rate.
除湿与常规组合干燥可以兼顾节能和较高的干燥速率，是今后的主要发展趋势。
Compared with the conventional drying technology, this method has many outstanding features such as safety, reliability and easy maintenance.
同常规干燥技术相比，这种方法具有安全可靠、维护简单等优点。
Microwave drying has special merits and properties, this paper elaborated the microwave drying mechanism compared with the conventional drying.
微波干燥具有突出的优点和特点，新的应用也层出不穷。
The drying device solves the problems that the conventional drying device has large energy consumption, low efficiency, high cost and serious environmental pollution;
本发明从根本上革新了传统干燥装置能耗大、效率低，成本高和严重的环境污染问题。
Some Southern Type Poplar planks were dried with the comprehensive vapor drying technology which combined by high temperature and conventional drying technology in this experiment.
用高温干燥与常规干燥相结合的木材干燥工艺（简称蒸汽综合干燥工艺） ，对意杨厚板材进行干燥处理。
The instrument and theory of mould-method are briefly introduced and the principal process are described. Supercritical drying and conventional drying are used to dry the prepared films.
描述了利用模具法制备气凝胶薄膜的主要过程，并利用常压干燥和超临界干燥两种方法对模具中湿凝胶产物进行了处理。
But the CeO2-TiO2 mixed oxides prepared by conventional drying method show lower pore volume and surface area with serious aggregation, and amorphous phase compared to the corresponding aerogels.
采用普通干燥法制备得到的复合氧化物具有较低的孔体积和比表面积，颗粒间团聚较严重，但无“孤岛”状大颗粒，晶相为无定型结构。
Because if you are driving change, and the one example I want to give was our switch from conventional toners, which is the drying to chemical toners, and how difficult that was.
因为如果你想创造变革的话，这很重要，我想举的一个例子，是我们从传统碳粉，到化学碳粉的转变，这过程很困难。
Because equipment of vacuum drying is very complicated and drying cost is expensive, the conventional method is suited for popularization and utilization.
由于真空干燥设备复杂，干燥成本高，建议推广采用汽蒸高温脱脂干燥——常规干燥方法干燥落叶松板材。
The halogen exchange method to prepare p fluoronitrobenzene under microwave irradiation and conventional heat was studied. Drying KF by azeotropy and microwave irradiation was proposed.
该文研究了微波辐射和常规加热下卤素交换氟化合成对氟硝基苯的方法，提出了共沸干燥和微波干燥制备无水KF的方法。
More than 20% of drying time was saved compared with conventional freeze drying under the operating conditions tested.
超过20%干燥时间被保存了和常规冷冻干燥相比在经营之下情况测试了。
It is saving about one day in contrast with conventional wood drying and more energy was saved too.
此联合干燥与对比常规干燥窑体相比，联合干燥运行周期比常规窑体短一天左右，从而节约了大量能量。
According as its condition it figures out the consumption of conventional steam-dehumidification drying and compares to consumption of three drying means.
以此匹配条件为依据计算出联合干燥的各阶段的能耗，并对三种干燥方式进行了比较分析。
Operational environment and applying temperature of quick - drying cement are given. Fatigue waveform of conventional strain gauge and some questions in the test are discussed in the paper.
给出了一种快干肢的工作环境和适用温度，讨论了常规应变片疲劳波形和在测试中出现的问题。
DCPD modified TUPR has excellent properties such as higher mechanical strength, better air drying, and better thermal and chemical resistance compared with conventional ones.
与标准树脂相比，DCPD改性对苯型不饱和聚酯树脂力学强度高，耐热性和耐腐蚀性强，空干性好。
The main contents of green design are introduced and the disadvantage of conventional designing for food drying-machine is pointed out.
在介绍绿色设计主要内容的基础上，指出了食品烘干机传统设计上的不足。
The quality requirement of compressed air for various process in aluminum fabrication enterprise as well as conventional compressed air drying and purging methods are analyzed in the article.
分析了铝加工企业每生产工艺对压缩空气的质量要求及常用的压缩空气干燥、净化处理方法，介绍了两种适用于本行业的压缩空气干燥、净化工艺流程。
Drying with a heat pump is a main conventional method to dry lumbers. It has significant meaning for saving energy and shortening drying periods.
热泵干燥法是木材干燥加工的主要手段之—，采用高温工质对降低能耗、缩短干燥周期有重要意义。
Drying with a heat pump is a main conventional method to dry lumbers. It has significant meaning for saving energy and shortening drying periods.
热泵干燥法是木材干燥加工的主要手段之—，采用高温工质对降低能耗、缩短干燥周期有重要意义。
应用推荐