The conventional design method only considers one or several factors.
常规设计方法只考虑了其中一个或几个因素的影响。
Compared with conventional design method, this method improves design accuracy and efficiency.
与传统的设计方法相比。这种方法提高了设计精度和效率。
For assuring the precision and shape of large-scale antennas, conventional design method is to make the structure stiff enough.
为了确保大型天线的精度和形状，常规的设计方法是使结构足够的刚性。
Based on the conventional design methods of structural vibration, a method is presented to evaluate the reliability of structural vibration.
以传统的结构振动设计方法为基础，提出了一种进行振动可靠性设计的方法。
This paper optimize the conventional design method of the dispersion compensation fiber (DCF) and related arithmetic, and getting some valuable conclusions.
文章对DCF的传统设计方案及其有关算法作了改进，具有较高的实用价值。
The existing problem in conventional design method for ventilation system in hotel kitchen resulted in high ventilation ratio and large heat energy consumption.
酒店旧厨房空调换气系统的设计方法存在问题，而导致换气次数高、热能消耗过大。
The adoption of positive pre-swirl and low reaction degree increases the tip performance effectively, negative pre-swirl is required at hub for stator based on conventional design method;
在转子叶尖采用正预旋、低反力度的设计形式能有效地提高气动性能，如果想利用常规手段来设计下游静子则必须在叶根处引入反预旋；
Depending on the degree of safety to achieve structural control technique like active isolation, passive isolation or conventional seismic design method can be chosen.
依据所要达到的安全程度，可选择采用主动隔震结构控制技术、被动隔震结构控制技术或传统的抗震设计方法。
This method overcame the restriction in the accuracy selection of work smoothness in conventional design.
这种方法克服了常规设计中，工作平稳性精度选择的局限性缺点。
This paper introduces the concept and character of access networks, proposes route construction and reliability algorithm used in the design, and compares the new method with the conventional method.
介绍了接入网的概念及特点，阐述了高可靠性光纤接入网设计中应用的路由构造算法和可靠性算法，比较了与传统方法的异同。
The aeration system designed by this method will save the energy consumption and equipment capacity by 15% compared with the conventional design.
若将这一设计概念运用于工程实践，较之于常规的设计方法，可以使曝气系统的能耗和设备能力节约15%左右。
The structure and design method of Doubly-Fed Brushless Machine (DFBM) is quite different from the conventional AC machine.
无刷双馈电机的结构型式及其设计方法与常规交流电机具有较大的不同。
It has broken the conventional law of design. A model experiment was conducted in order to demonstrate the reliability of this method.
该方法打破了传统的设计规律，为验证该方法的可靠性进行了模型试验。
Based on the minimum interference suppression ratio, the paper presents a design method for linear array geometry, which is different from the conventional equispaced linear array.
提出了一种基于最小干扰抑制比技术的线阵几何设计方法，它不同于传统的等间距设计方法。
This article is tried to design and calculate the complex heat screen of vacuum resistance furnace by the analysis method as a substitution for the conventional spline fit method.
本文试图建立一种分析法代替传统采用的试凑法，对真空电阻炉的复合热屏蔽进行设计、计算。
Contactless inductive power transfer system with conventional inductive technology was researched and a design method was presented after applying it to ultrasonic vibration machining system.
利用传统电磁感应理论研究了无接触感应电能传输系统和应用在超声振动加工系统中的设计方法。
The causes for sinking of foundation below equipments and conventional dealing method are specified, for offering references for design and treatment of accidents.
阐述了设备基础下沉的主要原因和几种常见的处理方法，在设计和事故处理时可供参考。
This design of intelligent charger, using a new type of charge method which combinate the commen charging and fast charging method, overcome the defects of conventional charging and fast charging.
本文设计的智能型充电器，采用一种新型的常规充电和快速充电相结合的充电方法，克服了常规充电方法和快速充电方法的缺陷。
The environment design method which is directed by conventional aesthetics usually makes the designer stacked against the design object.
以传统美学来指导环境设计的做法，很容易使设计者把使用者和设计对象对立起来看待。
This paper presents a reliability design method of turbine part vibration, based on conventional vibration design method for turbine parts.
以传统的振动设计方法为基础，提出了透平机械零件振动的可靠性设计方法。
Compared with conventional graphic solution and logical analytic method, it has some advantages such as simple, easy master and quick design speed.
与传统的作图法和逻辑解析法相比，具有简单、易掌握、速度快等特点。
This article takes the commonly used CW6140 conventional lathe as an example, introduces the design method of using PLC to transform the electricity control into automatic control.
本文以常用的CW6140型普通车床为例，介绍了利用P LC把继电控制改造为自动控制的分析与设计方法。
In the light of the inefficiency of the conventional 2 - D engagement design method for tricone bits and the untruth of the 2 - D engagement chart, a new Program for bit engagement design is develope.
针对三牙轮钻头传统的二维啮合设计方法的低效率和二维啮合图的不真实性，开发出一个三牙轮钻头啮合设计新程序。
And point out the limitations of design method of conventional induction motor which is used in the design of inverter-driven induction motor.
指出了传统异步电机设计方法在变频调速异步电机设计中存在的局限性。
The method with MAPGIS resources can reduce the difficulties encountered in conventional program design for columnar section drawing.
使用该方法能充分利用MAPGIS系统资源，降低编制绘图程序的难度。
Incorporating the grey prediction, fuzzy control and the conventional PID control, a design method of the grey prediction fuzzy PID control algorithm is presented.
将灰色预测、模糊控制与常规pid控制三者的设计思想融合起来，提出了一种灰色预测模糊pid控制算法。
The new method of re-construction of free-form surface which takes full advantage of conventional design and reverse-engineering is introduced in this paper.
介绍了将逆向工程与正向设计结合实现自由曲面模型重构的新方法。
Simulation result of given plant showed that the proposed MMA-IMC design method is superior to its conventional counterpart and PID in performance of stability and robustness and response speed.
仿真表明， 多模型自适应内模控制较之单内模 控制和常规PID 控制，在稳定性、鲁棒性和响应 速度等方面，均具有明显的优越性。
Simulation result of given plant showed that the proposed MMA-IMC design method is superior to its conventional counterpart and PID in performance of stability and robustness and response speed.
仿真表明， 多模型自适应内模控制较之单内模 控制和常规PID 控制，在稳定性、鲁棒性和响应 速度等方面，均具有明显的优越性。
应用推荐