Based on the process features of rapid laser prototyping, this software system implements the concurrent process of data processing and process controlling.
该软件系统结合激光快速成形技术的工艺特点，采用了数据处理与加工控制并行处理的运行机制。
The including process, hardware allocation, software allocation, and main functions of controlling system were illustrated.
阐述了系统的工艺流程、硬件配置、软件配置和控制系统的主要功能。
The method includes configuration design, sensor and testing circuit design, controlling system design and software design.
其中包括了结构设计、传感器及其测量电路设计、控制系统设计及软件设计。
The controlling software in the PC called GDP Experimental System (GDPES) can control the controller, get the datum from the controller to proceed and save the datum.
PC机内装有控制软件——高分子材料动态力学谱仪试验系统(GDPES)对控制器进行控制，从控制器得到数据并进行整理、保存。
And the main welding software for controlling system is given.
文章给出了控制系统的焊接主程序。
In order to show the controlling effect lively, the realization plan was proposed, which constructs the dynamic and observed pendulum control system by configuration software.
为了生动直观地演示这一控制效果，提出了使用组态软件对倒立摆系统进行动态可视化处理的实现方案。
Software for controlling transport system and measuring stage positioning accuracy programmed by TP801 single board computer is presented in the paper.
文中主要介绍了利用单板机TP801编制的控制输片系统动作及测量工件台定位精度的软件。
By the use of software EASY5, the electro-hydraulic proportional system of position close-loop is modeled and simulated, which provided the controlling parameters for experiment.
利用EASY5仿真软件对组合阀组成的电液比例位置闭环系统进行动态建模仿真分析，为实验提供了控制参数。
In this paper mainly describes the synthesizer and its key circuit, also the hardware structure of single chip microcomputer controlling system and design method of software.
主要介绍该合成器的构成及关键部件电路，并阐述了单片机控制系统的硬件结构及软件设计方法。
A fully digital controlling system of the on-line UPS by using a TMS320F2812 is introduced, and its hardware structure and software design are proposed.
介绍一种用TMS320F 2812实现的在线式UPS的全数字化控制系统，给出系统的硬件结构及软件设计方案。
The function and flow of the system, hardware configuration and the development of the software for the computer controlling system are introduced briefly.
简述了系统的功能与流程、硬件配置及结构、计算机控制系统软件的设计与开发。
As for the software design, the paper takes advantage of the sequence controlling design programming, and designs the ladders diagram of the automatic controlling system with this method.
软件编程方法采用顺序控制设计法，并根据此方法设计了压块机自动控制系统的梯形图。
This article, introduces setting up of reflectance confocal microscope which is divided into four parts:optical system, scanning system, detecting system and software controlling system.
介绍了反射式共聚焦光学系统的搭建，整个过程分为显微镜光学系统、扫描装置、检测系统、软件控制四个部分。
The basic principle of measurement is presented. The optical system, hardware controlling system and measuring software are designed.
介绍了测量原理，设计完成了相应的光学测量系统、硬件控制系统和控制测量所需的软件。
The text deliberates on the hardware construction and the software design of the system, and prowider an analytic study on the controlling problems of the multi-couplings and the great lag system.
文中讨论了系统的硬件结构和软件设计，并就多耦合、大滞后系统的控制问题进行了分析讨论。
The functions of the software system include controlling the hardware, searching satellite and measuring the main parameters of the antenna.
软件系统包括：完成对硬件的软件控制，实现寻星定位子系统的寻星算法以及对天线主要测量参数的软件实现。
The research includes the design of the system , deciding the way of controlling , the design of hardware and software, the installation and debugging of the system.
具体包括监控系统的总体设计、控制策略的选取与实现、监控系统的软、硬件开发和监控系统的安装与调试。
Based on summarizing the experience on developing the software of testing and controlling system, software static and dynamic test technology are discussed in this paper.
文章在总结测控系统软件开发经验的基础上，针对测控软件的特点，讨论了测控软件的静态及动态测试。
Controlling software system design: planning and designing the controlling software from structure, function and task, interfaces, etc.
整机控制软件设计：对控制系统软件从结构、功能任务、界面菜单等方面进行了系统的规划和设计。
This paper also introduced the composition and function of run-time monitor software exploited with software of VB6.0 on the basis of distributed controlling system.
本文阐述了分布式监控系统的基本原理，并在此基础上介绍了VB6.0软件开发的实时监控软件的组成及功能。
This software system lays down a firm base for developing the software system for managing and controlling multi base stations under the condition of AIS base station network.
为以后在基站网络环境下开发管理与控制多个基站的软件系统奠定坚实的基础。
The requirement of the system is analyzed. The controlling circuit and software are introduced carefully.
分析了系统性能要求，重点介绍了控制电路的设计模块及软件设计思想。
The results of analysis and test show that testing time could be shortened 35% with the improved software GAUSS for controlling the MTS system during random-loading fatigue test.
分析和试验的结果表明，用改进后的软件控制随机加载的疲劳试验，可节省35%的试验机时。
The hardware circuit and controlling software are designed and the control accuracy is analysed in the paper. The system is valuable and can be used to develop new devices.
为此设计了硬件电路及控制软件，分析了系统控制精度，具有实用价值，并能够进行进一步开发。
The paper introduces a devise of the principle and structure and software by using a monolithic computer temperature controlling system with high accuracy in thermotanks.
介绍一种应用在高恒温精度恒温箱的单片机控温系统的原理、结构和软件设计。
The application of the DS1820 digital temperature sensor in the measuring and controlling system and software design is discussed detailedly in the paper.
详细讨论DS1820温度传感器和单片机接口电路，软件设计以及在测控系统中的应用。
The hardware composition and the software design of the controlling system are mainly introduced, and the construction chart of the system is shown.
重点介绍了控制系统的硬件组成和软件设计，给出了系统结构原理框图。
The working principle, controlling procedure and software design of the system is presented.
详细介绍了该系统的工作原理、控制流程和软件设计。
The paper introduces constitutes and function of the system and expatiates hardware and software design idea of controlling and controlled ports.
介绍了系统的组成和功能，阐述了调度端和被控端的硬件、软件设计思想。
The paper introduces constitutes and function of the system and expatiates hardware and software design idea of controlling and controlled ports.
介绍了系统的组成和功能，阐述了调度端和被控端的硬件、软件设计思想。
应用推荐