The necessary shifts in signal phase are controlled via a dedicated beam steering controller or the architecture's central processor.
信号相位的必要相移通过专用波束调节控制器或集中安排的处理器进行控制。
In this case the controller sends out a FAILURE signal to the coordinator, thus invoking the compensatory activities in reverse order.
在本例中，控制器会将FAILURE信号发送给协调器，从而以反转顺序调用补偿活动。
Inject is an instance of One2OneChannelInt that will be used by the controller process to send a new multiplying factor (which also serves as a wake-up signal) to the device.
inject是One2OneChannelInt的实例，由控制器进程使用，用来向设备发送新的乘数(也充当唤醒信号)。
The twist in the tale is as follows: a second controller process exists in the system that can send a suspend operation signal to your device over a dedicated channel.
这个故事中介绍的方法是这样的：系统中存在着第二个控制器进程，它能通过专用通道向设备发送suspendoperation信号。
From the base station the signal is sent to the controller looking like this.
信号从基站发送到控制中心是这样的。
If the controller receives a SUCCESS signal from an activity, it sends a signal to the coordinator component (in this case PROPAGATE), thus invoking the next activity.
如果控制器收到了来自活动的SUCCESS信号，它会发送信号到协调器组件(在本例中是PROPAGATE)，从而调用下一个活动。
Once an activity completes it sends a signal (in this case either a SUCCESS or FAILURE) to the controller.
活动完成后，会发送信号(在本例中是SUCCESS或FAILURE)给控制器。
Notice in step 8 of Figure 3 that a FAILURE signal is sent back to the controller.
注意图3的步骤8中FAILURE信号被发送回控制器中。
If the controller has sent a suspend signal to the device, this event gets processed with the highest priority.
如果控制器向设备发送了suspend信号，那么这个事件以最高优先级得到处理。
Design the signal adjust circuit for sensor, and the power amplification circuit for the hydraulic pressure system of test platform and the controller of magnetorheological dampers.
设计出传感器输入输出信号调理电路和试验台架液压激振系统、磁流变阻尼器控制器的功率放大电路。
Derivative action (referred to by the letter d) measures and responds to the rate of change of process signal, and adjusts the output of the controller to minimise overshoot.
微分动作(字母d表示)测量并对过程信号变化率进行反应，调整控制器的输出以达到最小的突出峰。
If two signal importations of controller carry to merge the importation, its exportation will expand after carry use the matrix method conjunction 256 roads.
如果两个控制器的信号输入端并联输入，其输出端用矩阵方式连接后，将扩展成256路。
To satisfy the feed mechanism's real-time performance, the linear motor controller is designed based on Digital Signal Processor (DSP).
为满足进给机构控制系统实时性要求，设计了基于DSP的直线电动机控制器。
Shock sensor can detect excessive shock applied on a drive and send signal to VCM controller.
冲击传感器可以检测到驱动器上的过度冲击应用和发送信号，氯乙烯控制器。
Interfacing the 853 digital signal power controller with a computer allows the controller to be truly customized for any industrial heating application.
接口信号电源控制器与计算机的853数码允许控制器真正应用定制任何工业加热。
Combining the nonlinear control system theory and the aim of chaos synchronization, we designed a nonlinear feedback controller for synchronizing the scalar output signal of Chua's Circuits system.
把非线性系统的微分几何理论与混沌系统的同步控制目标相结合，设计了蔡氏电路混沌系统的标量混沌信号同步控制的非线性反馈控制器。
The system is composed of three subsystems, they are the signal monitor subsystem, the PLC (the Programmable Logical Controller) one and the host computer control ore.
该自动化系统分为信号监测、PLC(可编程逻辑控制器)控制、上位机控制三大部分。
In one example, the controller 36 considers a pilot channel associated with the received signal for determining which of the two receivers to select for processing the received signal.
在一个例子中，控制器36考虑与接收的信号关联的导频信道，用于确定选择两个接收机哪一个来处理接收的信号。
The repetitive controller based on the theory of internal model produces correction signal based on the control error of the last cycle to eliminate the error in the latter cycle.
重复控制的基本思想是控制理论中的内模原理，根据上一周期的控制误差消除后面各周期性的信号误差。
Using the input and output signal, the method can model the system, and can control the dynamical property of the system with the inverse transfer function of the controlled object as the controller.
本方法以实际系统的输入输出信号为依据，实现系统建模，用被控对象传递函数的逆作为串联控制器来对系统的动态特性进行控制。
The controller does not depend on the model of power system. Using a local signal to realize its control, the structure of this controller is very simple.
这种控制器不依赖于被控系统的模型，采用当地信号实现控制，结构简单。
The main research work of this paper includes:Designed and established a high speed embedded signal processing system with the controller of TMS320C6712 and EPM7128S.
本论文完成的具体工作包括：采用TMS320C6712和EPM7128S为控制器件，设计制作了一个可以脱机自主运行的嵌入式高速信号处理系统。
Input signal of controller is solenoid valve lift. Control parameters are valve opening timing and valve open duration.
控制器的输入信号为电磁阀升程，控制量是气门开启定时和开启持续时间。
Usage: This detector is applied to plastic looms for stopping operation in case of broken weft and weft-out. It is composed of signal emitter, receiver and controller.
用途：本检测器用于塑料园织机在断纬、完纬时控制主机停车之功能。它由信号发射器，信号接收器和控制器三部分组成。
The parameter of the transmitting system procreated chaotic carrier is modulated by errors from an adaptive controller and information signal.
利用一个自适应控制器跟踪信息信号的误差对产生混沌载波的发射系统进行参数调制。
Adopt gas fire extinguishing controller to collect signal to start the solenoid valve, the action is stable and reliable, reflect sensitively.
采用气体灭火控制器收集探测元件探测的信号来启动电磁阀，动作稳定可靠、反应灵敏。
The data acquisition system adopted TMS320LF2407A chip of ti as main controller, in addition, designed peripheral signal processing circuit, memory module, communication module and so on.
该数据采集系统采用TI公司的TMS320 LF 2407 A芯片为主控制器，另外设计了相应的外围信号调理电路、存储模块、通信模块等。
The HP3 robot sequential control technology in product selecting based on robot control tank NX100 layout illustration realizes the link of robot correlative control signal and upper controller.
HP3机器人顺序控制技术在产品分选中的应用，参照机器人控制柜NX100配线图完成机器人相关控制信号与上位机控制器间的连线。
The Single-Phase 851 Digital SCR Power Controller from Spang Power Electronics offers the latest in Digital Signal Processing (DSP) technology and software.
单相电力电子控制器从斯潘851数字晶闸管电源提供软件的最新数字信号处理（DSP）技术和。
The Single-Phase 851 Digital SCR Power Controller from Spang Power Electronics offers the latest in Digital Signal Processing (DSP) technology and software.
单相电力电子控制器从斯潘851数字晶闸管电源提供软件的最新数字信号处理（DSP）技术和。
应用推荐