For instance, the Ethernet controller with specification 02:01.0 tells you that the card is in bus #02, slot #01, with function #0.
例如，规范说明为 02:01.0 的以太网控制器，告诉您这个插件是在 #02总线的 #01插槽中，其功能是 #0 。
Because there is another Ethernet controller with the same bus and slot number (and a different function), this is a two-port controller.
因为还有另一个有着相同的总线和插槽编号(而功能不同)的以太网控制器，所以这是一个两口的控制器。
Considering strong disturbance environment in the field area, redundant design in bus cable, CAN controller and driver is involved to assure the reliability of data transmission.
考虑到现场的环境干扰较强，对总线电缆及CAN控制器、驱动器采用了冗余设计，保证数据传输的可靠性。
To transfer instrument commands and data on the bus, the Controller addresses one Talker and one or more Listeners.
为了在总线上传输仪器命令和数据，控制器给一个呼叫口和一个或几个响应口分配地址。
The SOC design and implementation of the spacecraft system bus was studied, for example of the 1553b bus controller.
以1553 B总线控制器为例，采用SOC设计方法，研究了航天器系统总线的设计和实现。
Thirdly, combining MCU clip AT89C51 with bus controller SJA1000, an intelligent control CAN node for the experimental platform is designed.
然后将MCU芯片at89c51和SJA1000总线控制器结合，为实验平台设计了实时可靠的智能控制CAN节点。
The CAN subnets are coordinated by a master controller that also provides the gateway to the main CAN bus.
CAN子网由一个主控制器协调，该主控制器也为主CAN总线提供网关。
FPGA is regarded as DMA controller, acquisition controller and BUS controller.
把FPGA用作D MA控制器、采集控制器和总线控制器。
This article designed one kind of elevator caller controller based on CAN-bus , It is an important constituent of elevator .
本文设计了一种基于CAN总线的电梯呼梯控制器，它是电梯的一个重要组成部分。
Digital outputs can be controlled from the front panel or from the bus controller.
数字输出可由前面板或总线控制器控制。
The GPIB has one Controller, usually your computer, that controls the bus management functions.
GPIB有一个控制器，通常是你的电脑，用来控制总线管理功能。
As an important component of the control system, display controller can monitor and modify the BUS data in real time.
而显示控制器作为控制的一个重要部分，可以对总线的数据实行监测和修改。
The application of CAN BUS controller in milling machine was described, the design of hardware and software in driving control system was introduced.
介绍了CAN总线控制器在铣刨机系统中的应用，同时介绍了其行走控制系统的硬件、软件设计。
This device analyses information from fire alarm controller through CAN Bus, and displays occurent fire addresses and alarm types on Chinese LCD module dynamically and in real time.
该设备通过解析火警控制器从CAN总线上发送来的火警信息，在汉字液晶上动态实时地显示火警发生地点和报警类型。
A new type distributed multimedia control system, which utilizes multimedia-computer, CAN BUS LINE, and micro-controller is introduced.
它是一种利用多媒体计算机、CAN现场总线和微控制器组成的一种新型的分布式多媒体控制系统。
The logic design and physical implementation of a GPIO_WB controller based on WISHBONE Bus are achieved.
完成了一种基于WISHBONE总线的GPIO_WB控制器的逻辑设计和物理实现。
To avoid interfering by work, data were sampled through a multi-layers network which synthesize the field-bus and Ethernet and center on programmable logic controller.
为了排除人为干扰、提高可靠性，采集数据以可编程逻辑控制器为核心，通过现场总线和以太网的多层网络传送至数据库中。
With the increase of city bus in demand for servings, the traditional bus controller can no longer meet the increasing complex requirements.
随着人们对城市公交车辆服务需求的增多，传统的公交车控制器已经不能满足日益复杂的要求。
It provides interfacing between a link controller and the physical bus wire.
它提供的接口之间的连接控制器和物理总线线。
The field controller performs excellently in real-time property, openness, reliability, mathematical operation and multi-bus integration.
该控制器在实时性、开放性、可靠性、运算处理能力、多总线集成等方面具有优异的性能。
The computer control system scheme of Aluminum electrolytic cell based on CAN bus and Fuzzy controller based on chaos optimization are designed.
设计了基于CAN总线的预焙铝电解槽计算机控制系统的总体方案及基于混沌优化的电解质温度模糊控制器。
Each controller on a bus can be individually addressed by the CPU, this is why the software device driver can write to its registers and thus control it.
在总线上的每个控制器可以被CPU所单独寻址，这是软件设备驱动程序能写入寄存器并能控制这些控制器的原因。
This design realizes the data communication between the main controller and accessary controller in MIC bus redundancy system.
本设计实现了在MIC总线冗余系统中主控制器与从控制器间的数据通讯。
The controller can carry on the departure time and spacing interval of the arrangement vehicle rationally sequentially, and examine the bus driver.
调度员也可依次进行合理安排车辆的发车时间及间隔时间，并对公交车驾驶员进行考核。
The top-down design methodology is used to realize the PCI bus controller.
采用自上而下的设计方法，实现了较困难的PCI总线控制器。
The thesis introduces Controller Area Network bus into strain measurement, founds strain measurement system based on CAN bus.
本文将CAN现场总线引入到应变测试中，提出了基于CAN总线的应变测试系统方案。
It expounds the software and hardware designing schemes and main points as well as explains the application of the CAN bus controller-SJA1000.
阐述该系统软、硬件的设计方案和设计重点；讲解CAN总线控制器SJA1000的应用。
It expounds the software and hardware designing schemes and main points as well as explains the application of the CAN bus controller-SJA1000.
阐述该系统软、硬件的设计方案和设计重点；讲解CAN总线控制器SJA1000的应用。
应用推荐