Mainly described are the working principles and structure features of the number marking device for the computer-controlled signal board.
主要介绍了微机控制标志板打号机的工作原理及结构特点。
A design scheme of GP-IB standard interface for microwave program controlled signal source is proposed, and is realized in this microwave signal source.
提出了一个微波程控信号源的GP -IB标准接口的设计方案，并在微波信号源上得以具体实现。
Each audio signal can be controlled and processed in various ways, such as converting between file formats and applying effects like gain and reverb.
每一个音频信号可以通过不同的方法进行控制和处理，比如在不同文件格式之间的转换，和对效果(如增益和回响)的使用。
The system achieves multi-channel temperature signal acquisition and control. Temperature limit is set by keyboard. The buzzer and relay are controlled by MCU.
本系统可以实现多路温度信号采集与显示，可以使用按键来设置温度限定值，通过进行温度数据的运算处理，发出控制信号达到控制蜂鸣器和继电器的目的。
The necessary shifts in signal phase are controlled via a dedicated beam steering controller or the architecture's central processor.
信号相位的必要相移通过专用波束调节控制器或集中安排的处理器进行控制。
Stepping motor can be controlled by pulse signal and applies to digital control system.
步进电机可直接接收脉冲信号的控制，适合于数字控制系统。
The theory research results of one cycle controlled switching power amplifier show that the output signal follow the input signal linearly, and the control performance is decided by output filter.
理论分析结果表明，单周控制开关功率放大器的输出信号与输入信号成线性变化关系，其控制性能由输出滤波器决定。
Using the input and output signal, the method can model the system, and can control the dynamical property of the system with the inverse transfer function of the controlled object as the controller.
本方法以实际系统的输入输出信号为依据，实现系统建模，用被控对象传递函数的逆作为串联控制器来对系统的动态特性进行控制。
The aim was to provide a more controlled environment for the audio signal on itspath from the capsule to the output section.
目标就是为从膜片输出的音频信号提供更多能控制的环境选择。
The meter is controlled by PC586 via remote communication with higher measuring accuracy using signal averaging technology of the software. The meter has a wide adaptability in clinical practices.
该血压计利用远程通讯，由上位机586进行系统管理，并采用软件的信号平均技术来达到较高的测量精度，在医疗临床上有广泛的适用性。
The conversion process and data acquisition are controlled using CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs.
转换过程和数据采集过程通过CS和串行时钟信号进行控制，从而为器件与微处理器或DSP轻松接口创造了条件。
In this system the crankshaft rotating Angle, where the peak combustion pressure occurs, is taken to be a feed back signal, so that the ignition timing of the engine is able to be controlled.
该控制系统利用最高燃烧压力点的曲轴转角作为反馈信号，实现其对发动机点火正时的控制。
Stepper motor is a motor controlled by digital signal, which converts pulse signal into Angle displacement. The wheeling speed is controlled by the frequency of pulse signal.
步进电机是一种数字控制电机，它将脉冲信号转变成角位移，电机的转速由脉冲信号频率决定。
Output force phase should be controlled so as to get the far field signal inphase with the output force phase.
为了保证远场信号的相位与激振力的相位一致，应当控制激振力的相位。
Methods When debugging servo system, the signal sending parts of servo system's detector made of DSC controlled the movement of servo system.
方法由DSC组成伺服系统检测中的信号发送装置，在调试伺服系统时，控制伺服系统的运动。
The selection of filter is controlled by software, so that low-noise signal can be acquired in a wide frequency band.
由软件控制选择滤波器，这样可以在很宽的频带获得低噪声的信号。
Using PC or programmable devices instead of the signal generator, a high voltage solid state switch controlled by programmes will come into true.
用PC或者可编程器件取代信号发生器提供控制信号，可以实现高压固体开关的程控功能。
The full automatic light adjustment within a wide range is carried out by the integration time of CCD camera with an electron shutter and planar motor automatic iris controlled by video signal.
它采用视频信号控制带有电子快门的C C D摄象机的积分时间以及平面电机自动光圈，实现宽范围全自动调光。
In addition, start and stop of emulsifying combustion can be controlled by a manual button, and the working condition signal and PWM duty ratio can be displayed by digital led.
另外，根据实际需要，掺水燃烧的起停可以通过手动按键来控制，工况信号以及PWM输出占空比通过LED数字显示。
By means of this technique, the signal frequency can been controlled with facility, accuracy, continuous phase and fine frequency resolution.
利用这种技术可以方便的实现高精度、连续相位、高分辨率的频率控制。
This paper presents an electricity-saving system controlled by Single chip Microcontroller AT89C51 and power line signal carrier.
设计了1种在单片机AT89C51控制下运行的、利用电力线载波发射控制信号的节电控制系统。
This paper introduces controlled blasting technology on signal chamber of pit-bottom and main haulage roadway, which are of complex condition, lithological character and highly security.
介绍了采用控制爆破技术施工位于井底车场及主要运输大巷的信集闭峒室，条件复杂，岩性变化大，要求安全性高。
The rotation angle approximately periodically changes the sub-beam signal amplitude and should be strictly controlled in the assembly to maximize the tracking signal amplitude.
计算结果表明：旋转误差使三光束法循迹信号的幅值近似呈周期性变化，它是在生产过程中需要严格控制的参数以保证循迹信号的幅值最大化；
Receiver power consumption is determined by dynamic range requirements, controlled by the relationship between the noise floor and the maximum expected signal.
接受器的功耗主要由动态范围的要求确定，由噪底和最大预计信号间的关系确定。
In the paper, traffic signal light is controlled by PLC-200 by using programming logic controller of Siemens company.
文章主要是采用西门子公司的可编程逻辑控制器PLC- 200来实现交通信号灯的控制。
The spectrum form of square-wave controlled laser, optical signal heterodyne detecting device and principle of electrical signal demodulation are considered with emphasis.
文中着重分析了方波控制激光器的频谱形式、光信号外差探测装置和电信号解调原理。
Triggering the safety air bag in Toyota Model 94 Camry car is controlled by electronic-controlled module according to the signal from collision sensor.
日本丰田佳美94型轿车安全气囊的触发由电控模块根据碰撞传感器的信号进行控制。
The final basic cause that resulted in the failure is no working state monitoring signal and failure warning signal of power supply source of controlled silicon excitation device.
最终查出造成机组事故的根本原因是可控硅励磁装置供电电源无工作状态监视信号及故障报警信号；
The final basic cause that resulted in the failure is no working state monitoring signal and failure warning signal of power supply source of controlled silicon excitation device.
最终查出造成机组事故的根本原因是可控硅励磁装置供电电源无工作状态监视信号及故障报警信号；
应用推荐