UseJBK3Z, JBK5Z, the JBKZFU series rectification control transformer, conforms to the electricity rectification standard.
用途JBK3Z、JBK5Z、JBKZFU系列整流控制变压器，符合电整流标准。
This article explains power selection, adjustment and protection of control transformer and calculation method on secondary short circuit current.
阐述了控制变压器功率选择、校验、保护及二次短路电流的计算方法。
If prompts are used in the report, Transformer modelers can control which filters are applied when the PowerCubes are built.
如果报告使用了提示功能，那么Transformer建模师就可以控制在构建PowerCubes时使用哪些过滤器。
The design of flyback switching transformer and feedback control loop and the improvement of the circuit for considering electromagnetic compatibility are the critical technologies.
反激式开关变压器和反馈控制回路设计，以及考虑电磁兼容性对电路的改进，是其关键技术。
On the basis of active power filter linear shunt transformer harmonic impedance control, a novel principle for high voltage alternate power distribution systems is proposed.
针对高压交流配电系统，提出一种基于线性并联变压器谐波阻抗控制的并联型有源电力滤波器新原理。
High accurate double channels rotary transformer is the position detecter of the launcher, feeding back the position information of the closed-loop control system.
采用高精度双通道旋转变压器作为发射架的位置检测装置，实现了闭环控制系统中位置信息的反馈。
The basic working principle, hardware structure and main technical features of a micro computer based control system for transformer economic operation is presented in this paper.
介绍了一种微机双绕组变压器负荷经济运行控制系统的基本工作原理、硬件结构框图和主要技术特点。
The parallel transformer can exhibit controllable impedance under the control of power electronic converters.
通过电力电子变换器的控制，使得并联变压器呈现可控的阻抗。
Main measures for electricity saving of buildings in terms of equipment selection, lines control modes, reactive compensation mode and transformer selection etc. were introduced.
从设备的选型、线路的控制方式、无功补偿方式、变压器的选择等方面介绍了建筑电气节电的主要措施。
A kind of medium voltage AC variable frequency control system, which consists of voltage source inverter, sinuous filter and stepup transformer with variable frequency, is introduced.
介绍一种采用低压电压型变频器、正弦波滤波器和变频升压变压器构成的低-高式中压变频控制系统。
The basic theory for voltage and reactive control and the taps changed in transformer and shunt capacitor switched affect the voltage value are discussed in the paper.
本文从电压无功综合控制的基本原理出发，说明了变压器分接头的调节与并联电容器投入容量的大小对电网电压的影响。
The distributed control system for chromatograph on-line monitoring of transformer oil is introduced, which is composed of a master computer and several terminal computers.
介绍了由一个主机、多个终端机组成的用于变压器油色谱在线监测的分布式控制系统。
Prefer those with knowledge about the main components such as transformer, converter, gear box, motor, traction system, train control system etc.
熟悉主要部件如变压器，电机，变流器，齿轮箱，牵引系统及列车控制系统等。
The problems in cooling control system of traditional forced-oil cooling transformer are analyzed. A new intelligent cooling control system is designed.
对传统强油循环变压器冷却控制系统存在的问题进行了分析，设计了一种新的智能化冷却控制系统。
The ascertaining means of a transformer shunting tapping is discussed. These means are used in running control of factory transformer getting good results.
探讨了变压器分接抽头确定的实用方法，这些方法用在工矿企业的变压器的运行控制中取得了较好的效果。
This paper presents the electrical design solution for the transformer dry system based on SIMATIC S7-200 PLC, and introduces partly design of control circuits and control programs.
提出了基于西门子S7-200PLC的变压器干燥系统的电气设计方案，介绍了部分控制电路及控制程序设计。
Mainly analyses the effect of the transformer, when being heated, on the temperature control and finally gives the solutions.
着重分析了带变压器加热时给温度控制带来的问题及解决办法。
Besides, it is able to send temperature signal to the remote control center to synchronously display the transformer oil temperature.
同时能将温度信号远传到控制中心，同步显示变压器油温。
This paper USES the method in the study of power transformer optimum design. The method to select the control parameters of the algorithm is introduced in detail.
将遗传退火算法用于电力变压器优化设计问题的研究，介绍了算法实现过程中各种参数的选择方法并给出了具体算例。
The system are composed of center main station, many branch stations installed in control room and many substations fixed beside transformer of pumping well.
研制开发的抽油机井无线数据采集与监控系统，是由一个设在控制室内的中心主站、若干分站及设在抽油机井变压器旁的子站组成。
The structure and operation principle of DC motor, AC motor, control motor and transformer are introduced in this course.
本课程主要介绍直流电动机、交流电动机、控制电机和变压器的基本结构、工作原理；
Control signals in one home on a given transformer are present at any outlet in another home sharing the same transformer.
控制信号在一个家在一台特定变压器是存在所有出口在分享同一台变压器的另一个家。
The article introduces the control and management system of a small water power station. Th is station uses distributed control with four groups of generator and one group of main transformer.
本文所介绍的控制管理系统的控制对象是一个小型水电站，该电站由四台水轮发电机组和一台主变压器组成，全站采用分布式控制。
Computational test proves that this approach can validity effectually reduce the adjust times of transformer-tie-in and capacitor, improve the control effect.
仿真与实际运行结果表明，该方法能有效地减少变压器分接头和电容器的动作次数，改善控制效果。
The hydrogen power system consists of hydrogen feeding unit, fuel cells, power transformer and the control systems.
氢能发电系统由氢源、燃料电池和电力变换器及其控制系统组成。
The control strategy is based on nine-zone diagram and combined with artificial neural network, which makes a decision about the change of transformer taps and capacitor switching.
该系统控制策略以九区图为基础，并且在容易引起频繁动作的边界上采用人工神经网络预测变压器分接头调节和电容器投切后的电压无功，以决定采用何种控制方式。
It concludes that reactive compensation can increase power factor. Economical transformer operation can decrease energy loss. Power demand control can shed maximum peak load and lower productive cost.
无功补偿可以提高功率因数，变压器的经济运行可以最大限度地降低变压器的电能损耗，需量控制能够降低企业最大峰值负荷，降低生产成本。
Transformer control over the class load order would improve the generality of dynamic transformation but would not solve the problem.
变压器控制班级负荷秩序会改善的一般性的动态转化，但不会解决这个问题。
A control method based on neural network for pulse plating power is presented, and a mathematical model of the pulse transformer is established.
提出了一种用于脉冲电镀电源的神经网络控制器，并对脉冲变压器建立了数学模型。
A control method based on neural network for pulse plating power is presented, and a mathematical model of the pulse transformer is established.
提出了一种用于脉冲电镀电源的神经网络控制器，并对脉冲变压器建立了数学模型。
应用推荐