Then, the closed-loop control system model based on the ADRC is established.
建立了基于自抗扰控制器的双级矩阵变换器闭环控制系统模型。
A new spray paint robots control system model and a new Trajectory planning arithmetic.
提出了一种新的喷涂机械人控制系统模式及一种新的轨迹规划算法。
Study showed that the hydraulic control system model is multi-variable, slow time-varying and non-linear.
研究表明，液压系统模型是多变量、慢时变和非线性的。
The control system model consists of control strategy, sensors and actuators sub models. The control strategy is a PID controller.
控制系统模型包括控制策略、传感器和执行器模型，本文选用的控制策略为PID调节器。
Finally, the stability of the network control system model was analyzed, utilizing the stability conclusions of the ADS with event-probability.
最后，利用具有事件率约束的异步动态系统的一些稳定性结论，对本文所建的网络控制系统模型进行稳定性分析。
Therefore, the establishment of elevator group control system model and the research ofd EGCS strategy have an important theoretical significance.
因此，搭建电梯群控系统模型并对电梯群控控制算法进行研究有重要的理论意义。
Firstly, the networked control system model with random time-delay is simplified and transformed into a discrete-time system model with uncertain parameters.
首先对具有随机时滞的网络控制系统模型进行简化，导出了具有不确定系数的时滞离散时间系统模型。
According to the feature of hydraulic servo system, the PDF control strategy is proposed, and simulation test is done based on the setup of control system model.
根据其液压伺服系统特点提出了P DF控制策略，并在建立控制系统模型的基础上进行了仿真试验。
The response characteristic of moving-mass control for the low-altitude aircraft is researched based on the moving-mass control system model of the flying saucer.
在建立碟形飞行器变质量矩控制数学模型的基础上，对低空飞行器变质量矩控制的响应特性进行了仿真研究。
This article firstly introduced the layers structure and each layer function of CAN-bus's network model and designed the automobile control system model based on CAN-bus.
本文首先介绍了CAN网络模型中各层的功能和层次结构，设计了基于CAN总线的汽车控制系统模型。
In the MATLAB, using a structured design method, a dual PWM converter control system model were established on the basis of the stator flux field vector control technology.
该模型基于定子磁场定向的矢量控制方法，采用双pwm变流器，对大型并网风电机组的最大风能跟踪、有功和无功功率的解耦控制进行了仿真。
Finally, present the simulation result of above design combining seeker handing-off model, compound control system model, projectile body kinematics model and target maneuver model.
根据以上设计，结合导引头模型、复合控制系统模型、弹体运动学模型、目标机动模型，给出上述设计的仿真结果。
Test results of control system model are satisfactory. The developed software is proved in practical software programming, in which modeling and debugging can be easily implemented.
结果证明，利用混合语言编程技术开发的该实时仿真软件，对建立仿真算法、仿真模型以及进行实时仿真调试是很方便的，具有较高的应用价值。
The thesis presents the principle of VSCF wind Power. In this thesis, we adopt the vector control strategy of stator field-orient and gain a vector control system model of double-feedback generator.
介绍了变速恒频风力发电的基本原理，并采用定子磁链定向的矢量控制方法得到了双馈发电机的矢量控制系统模型。
The feature pull model all but requires an advanced source control system that supports integrated work item tracking.
功能拉模型需要高级的版本控制系统，支持集成工作项跟踪。
By the end of this article, you should know enough to get started with a distributed version control system and have a basic understanding of the advantages a distributed model can provide.
阅读完本文之后，您应该能够开始使用分布式版本控制系统，基本了解分布式模型能够提供的优点。
You can manage the resultant model by using a source control management system such as ClearCase or CVS.
可以使用一个源文件控制管理系统(比如clearcase或CVS)来管理这个结果模型。
The events (which control the interaction between the UI components, the data model components and the submission system)
事件（控制UI组件、数据模型组件以及提交系统之间的交互）
Building a model structure and implementing the file-control system is simply the first part of establishing an enterprise architecture repository.
构建模型结构和实现文件控制系统只是建立企业架构存储库的第一部分。
The song control system of birds has become an important model for studying neural system related to learning, behavior, and development.
鸣禽的鸣唱控制系统已成为研究神经系统与学习、行为和发育相关的一个重要模型。
Be familiar with or understand quality control system for overseas small module gear manufacturing enterprises, and relevant operating model.
熟悉或了解国外小模数齿轮生产企业的质量控制体系以及其运行模式。
The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
A company can control its own cloud system, outsource it in its entirety, or adopt a hybrid model.
企业可以控制他们自己的云系统，全面实现外包或者采用混合模型。
The control method of grinding grade process is designed and the whole grinding system is treated as several control subsystems by analyzing of the model of mill and grader.
在分析球磨机、分级机系统模型基础上，论文给出了磨矿分级过程的控制依据，并将整个磨矿系统分解为若干控制子系统。
The math model and control system design after modeling are the base and key point to process control system analyses, design, debug and obtain the higher control quality.
掌握被控对象的数学模型和建模后控制系统的设计，是过程控制系统分析、设计、调试和获得较高控制品质的基础和关键。
If models are created with Rational Software Modeler, a version-control system (such as Rational ClearCase) can be used to manage the model files.
如果使用Rational Software Modeler创建模型，则可以使用版本控制系统(如rationalClearCase)来管理模型文件。
The characteristic of the periodic task of control system is analyzed, and a periodic task model is given.
分析了控制系统中的周期性任务特性，给出了控制系统中周期性任务模型。
At first, it studied the plant model of position and force system about valve control unsymmetrical hydraulic ram.
首先，建立了阀控非对称缸位置控制系统与力控制系统的数学模型。
The system structure, control principle, mathematical model, algorithm software are discussed.
文中论述了系统组成、控制原理、数学模型、算法软件等。
Simulations demonstrate that SVM has good nonlinear approximation capability for inverse model, and the proposed control system has good dynamic and static performances as well as good robustness.
仿真研究表明，SVM具有优良的逆模型辨识能力，基于模糊控制补偿的支持向量机逆控制系统的动态性能好、跟踪精度高、鲁棒稳定性强。
应用推荐