The control system offers dynamic mode switching which enables the user to switch between a variety of feedbacks such as force, position, internal pressure and other system variables.
该控制系统提供了动态模式切换使用户之间的各种开关的反馈，如力量，位置，内部压力和其他系统变量。
The control and protection switching electric appliance (CPS) is a sort of New-style multifunction and integration component design to low-voltage distribution and control system.
控制与保护开关电器(CPS)是一种新型的用于低压配电与控制系统的多功能、一体化基础元件。
It introduces a design and implementation of constant temperature control system which based on L4960 single chip switching integration manostat and AD590 temperature sensor.
介绍了基于单片开关式集成稳压器l 4960和温度传感器ad590的一种恒温控制系统的设计和实现方法。
Real time switching of the system structure by method of variable structure control of information flows is studied.
研究通过信息流变结构控制方法实现对系统的信息结构进行实时切换的问题。
Principle, circuit design, hardware structure, software flow and features of dual computer switching circuit of FTK-3 hump automatic control system are introduced in this paper.
本文介绍了FTK-3型驼峰自动控制系统双机切换电路的原理、电路设计、硬件结构、软件流程和特点。
Two starting out signals of the DSP control system is used to realize switching power supply's soft start.
此电路采用基于DSP控制系统的两路开出信号来实现开关电源的软启动。
As a kind of linear motor, linear force motor usually is used as an actuator in positioning or switching control system for hydrometric servo valves and so on.
直线力电机是直线电机的一种，主要是作为执行器应用于电液伺服阀等位置伺服或开关量控制系统。
The powertrain control system of a hybrid electric vehicle (HEV) is developed, which can achieve energy management and state switching control.
开发了一种并联式HEV的动力总成控制系统，可实现HEV能量管理和状态切换控制。
Thus a demonstration is made on the composition and robustness of time optimization system; and on the suitability of the switching functions of suboptimal timing control.
本文论证次时间优化系统的组成及其鲁捧性，以及次优化时间控制的开关函数的适用性。
A model switching algorithm based on multi-model adaptive control is presented to solve the problem of poor transient response in the adaptive control of nonlinear time-varying system.
针对非线性时变系统在自适应控制过程中瞬态响应差的问题，提出了一种基于多模型自适应控制的模型切换算法。
The analytical method of power switching regulation system which has current-mode control is introduced in this paper.
本文介绍了平均电流控制型和峰值电流控制型开关调节系统的分析方法。
Presenting a model and arithmetic for CPUFC(CPU Flow Control)in distributed switching System.
介绍了分布式交换机系统环境下CPU流控模型与算法；
On account of the average current control chosen in the APFC system, a large signal dynamic BUCBB model is built and all the switching elements replaced by dependent sources.
由于变换器工作在平均电流控制的APFC系统中，本文建立了BUCBB变换器的大信号动态模型，并将BUCBB变换器中的开关元件用受控源代替。
This paper is focused on the process of automatic switching and gives a design of the automatic switching control system of ship power station.
本文以船舶电站的并车过程为研究对象，设计了船舶电站自动并车控制系统。
A fuzzy PID control method was presented which controls the pneumatic actuator servo position system using high-speed switching valves.
针对气动系统的非线性，提出一种模糊pid控制算法，使用高速开关阀，对气动执行器进行伺服定位控制。
The resonant soft switching inverter arc welding power source uses LCL type structure in the main circuit, and selects phase shifting pulse wide modulation technique in the control system.
研制的谐振式软开关弧焊逆变电源，主电路采用新型LCL结构，控制系统选用恒频移相调脉宽控制方案。
The scheme of circuit switching of two control machines in real-time control system that adopted dual machine thermal back-up and give priority to data choice chip are introduced simply.
文章简要介绍了在采用双机热备份实时控制系统中，以数据选择芯片为主，为系统热备份的两套控制机器进行切换选择的切换电路设计方案。
For the uncertain nonlinear system, the multiple-model predictive control is studied which combines the switching method for the nonlinearity and the one for the model uncertainty.
提出了不确定非线性系统多模型预测控制的新方法，它结合了针对非线性的基于系统输出的切换方法和针对不确定性的模型切换方法。
Programming the complex control algorithms and soft redundancy switching to the controller, and design the system structure rationally, it solves the control problem in refinery.
通过软件编程的方式将复杂控制算法和软冗余切换程序嵌入到控制器中运行，并合理设计系统结构，解决了炼油装置的疑难控制问题。
The system runs stably with a high control precision because of appropriate control strategy and meets the desired system value of high precision, low dissipation, multi-function switching.
由于采用了合理的控制策略，使得系统运行平稳、控制精度高，达到了高精度、低功耗、多功能切换的指标要求。
The instruction generator and logic control units are the chief components of the industrial contactless programmed control system (or static switching control systems).
指命发生器及逻辑控制部件，常常是工业无触点程序控制系统(或静止开关控制系统)中的主要组成部分。
This paper discusses the programming method of applying shift register of programmable controller (PLC) for switching signals control system.
本文论述了应用可编程序控制器(plc)的移位寄存器对开关量控制系统的编程方法。
Mobile communication system, resource switching method thereof, network control apparatus included therein, and network control method.
移动通信系统，资源切换方法，网络控制装置和方法。
In this paper, a pneumatic actuator position servo system is described, which controlled by a five-point switch PWM control method using high-speed switching valves.
本文使用一种五点开关pwm控制算法对高速开关阀控气动执行器进行位置伺服控制。
Structure parameters of its variable intake system, such as diameter and length of intake manifold, switching speed of control valve switch, etc. , are optimized.
对该汽油机采用的可变进气系统的歧管直径和长度、控制阀开关的切换转速等结构参数进行了优化设计。
The paper will deal with the designing of the supervisory computer control of switching box, the principle of the system hardwares and the designing process of the system softwares.
介绍交接箱监控管理系统的设计，详细讨论了该系统的硬件组成工作原理及软件设计过程。
The C437D, E Gas Pressure Switches are pressure-actuated switching devices used in industrial gas system applications for safety shutoff, pressure control, and differential-pressure control.
该C437D，电子气体压力开关的压力驱动开关器件在工业气体安全关断，压力控制系统应用中，和压差控制。
This study develops the switching power for the public bus voltage of the pumping frequency group control system and carries out a large number of experiments.
本文研究并设计了适用于抽油机变频群控系统这种特殊场合的开关电源，进行了大量实验并设计出样机。
Mobile station, mobile communicating system, and over-zone switching control method.
移动台，移动通信系统，越区切换控制方法。
Mobile station, mobile communicating system, and over-zone switching control method.
移动台，移动通信系统，越区切换控制方法。
应用推荐