Control power source is fully adopted low-voltage of 24v, which makes work safer and more reliable.
控制电源全部采用低压24v，工作更加安全可靠。
With any power source, make sure you use a good robot power regulation circuit to help control power to your robot.
使用任何的电源，都要确保使用一个好的机器人功率调节电路去帮助你控制你的电源。
For example, consider using Jazz source control and the Jazz build engine to power your continuous integration efforts.
例如，考虑使用源控制，以及Jazz构建引擎，来提高您的持续开发效率。
It is powered and controlled externally, but he plans to develop an onboard power source and sensors, and to refine the robot's control systems.
这只小昆虫由外部提供电力和控制，但他计划开发一个板载的电源的传感器，进一步完成机器人的控制系统。
Consider using Jazz source control and the Jazz build engine to power your continuous integration efforts.
考虑一下使用jazz源控制以及Jazz构建引擎来增强持续性的集成效果。
The component parts and control principle of pulsed SAW inverter power source are mainly introduced in the paper.
本论文主要介绍了所研制的单片机控制逆变埋弧焊机的组成结构和控制原理。
Timing circuit is usually made up of power supply unit, panel circuit and timing board, it is the digital control part of power source.
定时电路一般由电源模块、面板电路和定时板组成，是功率源中的数字控制部分。
The method of instantaneous value comparison for source current control of unity power factor rectifier possesses advantages of simplicity as well as valid restriction for maximum switching frequency.
在单位功率因数整流器中，利用瞬时值比较法来控制电源电流，不但控制简单，还可有效限制器件的最高开关频率。
The outline covers the component parts of a light emitting diode (LED) light source such as LED modules, LED Arrays, power sources and control circuitry.
这个指导纲要涵盖了LED光源的零部件，诸如LED模块，LED阵列，电源和控制电路。
To describe the operating principle and control, this paper focuses on an example: a Z-source inverter for dc-ac power conversion needed in fuel cell applications.
以应用于燃料电池逆变功率变换的阻抗源逆变器为例，分析了其工作原理和控制方法。
The analog part mainly includes power source, power control, signal generation, signal modulation, high voltage output control and feedback control circuit.
模拟部分主要包括电源、功率控制、信号产生、信号调制、高压输出控制和反馈控制电路。
The companys products convert and control raw electrical power from any central, distributed, renewable, or backup power source into high-quality power required by electronic and electrical equipment.
该公司的产品从任何转换和控制中心，分布式，可再生，或将电子和电气设备需要高品质的电源备用电源原料的电力。
Plasma spray welding power source, which gives energy to plasma arc welding, involves welding technology, power electricals, control theory, computer science and technology, and so on.
等离子喷焊电源是为等离子弧提供能量的电源，涉及到焊接工艺学、电力电子学、控制理论和计算机科学与技术等众多领域。
The space feed technique, microwave receiver, calibration technique, data collection& processing, driving& transmission, power source and heat control are also analyzed.
同时对天馈技术、波接收机、标技术、据采集与处理、动与传输、源、控制等技术进行了分析。
Welding machine control unit is equiped with no power source arc start unit, CMOS, and high power switch.
该焊机采用“无源引弧器”引弧，引入CMOS、时基、大功率开关等集成电路进行弧焊自动控制。
Focusing on the regulation of branch power. The amplitude and phase Angle of the series equivalent source of UPFC are selected as its control parameters.
针对调节线路潮流，把UPFC串联等效源的幅值和相位作为其在阻塞调度中的控制参数。
This paper proposes an energy saving control mode for current source inverter(CSI) induction motor drive system with the motor driving a constant power load.
本文提出了电流型逆变器-感应电动机变频调速系统中电机驱动恒功率负载时，系统以最大效率运行的节能控制方式。
This system consists of interactive-drawing programming system, control of working, power source with large power pulse, the main unit uses pentium 586 chip.
本控制系统由交互式绘图编程、加工控制、大功率脉冲电源三部分组成，主机采用奔腾586计算机。
The control characters of pulse superposition power source and the effect on metal surface treatment were also discussed.
论述了脉冲叠加电源的控制特点及对金属表面处理工程起到的独特作用。
A parameter control system for electroplating process based on power source was presented.
提出了一个基于电源装备的电镀工艺参数控制系统。
A new and practical power factor control strategy for three phase PWM current source rectifier was proposed.
提出了三相电流型PWM整流器的一种新型实用的功率因数控制方法。
This welding equipment consists of hollow cathode welding torch, vacuum system, welding power source, gas flow control unit and compact control device.
空心阴极焊接设备由空心阴极焊枪、真空系统、焊接电源、气体流量控制单元、总控制箱组成。
The space feed technique, microwave receiver, calibration technique, data collection & processing, driving & transmission, power source and heat control are also analyzed.
同时对天馈技术、微波接收机、定标技术、数据采集与处理、驱动与传输、电源、热控制等技术进行了分析。
Often as in engine bed and mechanical device local lighting and control wiring power source.
常作为机床及机械设备中局部照明及控制线路电源。
The filtermainly includes a voltage-source inverter and three identical control inductors that are connected in series with the power-line.
新型滤波器的主体包括电压源型逆变器和串联连接在电网中的三个大小相等的控制电感。
Compared with traditional control method, a digital control method of soft-switch arc welding power source is put forward.
在与传统的弧焊电源控制比较的基础上，提出了一种软开关弧焊逆变电源的数字控制方案。
The design includes power source, AD and DA conversion, output module of current-source, demonstration and control module.
设计分电源，AD和DA转换，电流源输出，显示和控制模块。
Based on the characteristics of MMA welding process, a new control system of IGBT inverter arc welding power source is developed.
针对手工焊条电弧焊(MMA)弧焊过程特点，建立了绝缘栅型晶体管逆变式弧焊电源控制系统。
Based on the characteristics of MMA welding process, a new control system of IGBT inverter arc welding power source is developed.
针对手工焊条电弧焊(MMA)弧焊过程特点，建立了绝缘栅型晶体管逆变式弧焊电源控制系统。
应用推荐