This paper introduces the realization of liquid crystal display device (LCD) under the control of microcomputer chip AT89C52, as well as the circuit and the software.
介绍了基于AT 89 C5 2单片机开发的液晶显示器系统的实现，包括系统的硬件电路设计和软件设计。
Control of microcomputer, frequency control of motor speed, touching panel, programmable operation with RCF automatic computing and setting, adjustable rise-and-fall speed.
微机控制、变频调速、触摸面板、可编程操作、具有RCF自动计算与设定、升降速可调。
Control of microcomputer, frequency control of motor speed, touching panel, programmable operation with RCF automatic computing and setting, adjustable rise-and-fall speed from grade 0 to 9.
微机控制、变频调速、触摸面板、可编程操作、具有RCF自动计算与设定、0至9档升降速可调。
Microcomputer control and use of data processing, direct calculation of the performance of the sample.
采用微电脑控制和数据处理，可直接测定计算试样的各项性能。
This paper describes and analyzes the principle of microcomputer system controlling sintering burn-through point, and provides its practical control methods and mathematical models.
本文叙述并分析了烧结终点微机控制系统的原理，提出了实用的控制方法和数学模型。
On this base, the closed - loop control method of hybrid step motor using the harmonic back EMF is investigated, and the microcomputer control system of step motor is designed.
在此基础上研究了利用谐波反电势信号实现混合式步进电动机闭环控制的方法，设计了步进电动机的微机控制系统。
A scheme is proposed to take the display of monitor device or microcomputer control system as the redundancy of the other for efficiency use of existing resources.
为了更有效地利用机车上的现有资源，提出监控装置和微机控制系统的显示器互为冗余的实现方案。
It is discusses here, how to control the rotating torque of the magnetic brake, as the load on micromotor tested by microcomputer.
介绍微电机微型计算机测试中如何控制作为负载的磁粉离合器的转矩问题。
The paper presents the control strategy of the microcomputer with knowledge base, and describes the software and block diagram of work of the two-stage microcomputer control system.
本文给出了带知识库的微型计算机控制策略，介绍了两级微机控制系统的软件和工作框图。
In this article, it is proposed that TDW905N controllable retarder, applied with microcomputer speed control system, is much suitable for automation improvement of small and middle Marshalling Yard.
本文提出TDW905N可控减速顶辅与微机速度控制系统，非常适合中、小能力驼峰编组场的自动化改造。
Hardware consists of microcomputer, stepping motor control card, stepping motor driver and stepping motor and so on.
硬件由微机、步进电机控制卡、步进电机驱动器和步进电机等器件组成。
For the manufacture of electric motor winding an imported microcomputer control system is adopted, to make the winding more accurate and more efficient.
电机绕组制作时，采用进口微电脑控制系统绕制，使绕组更加精确，效率更高。
The closed loop control of the motor position and velocity are realized using the microcomputer.
采用计算机实现了变磁阻电机的位置和速度闭环控制。
The controller, which is single-chip 8031 microcomputer, carries out the collection of fire signal and direct control.
控制器采用8031单片机实现，完成火灾信号采集和直接控制。
This paper mainly introduces the general microcomputer control design of the zincifying productive line and some problems about design skill.
本文结合实际工作，着重介绍滚镀锌生产流水线的微型机控制总体设计，以及某些设计技巧。
This paper discussed some typical techniques of microcomputer application in vacuum measurement and control.
本文讨论了真空测量与控制中微型计算机应用的若干典型技术。
This paper presents a design method of an inverted pendulum microcomputer control device.
本文介绍了一个倒立摆微机控制装置的设计方法。
Factors affecting the precisions of a microcomputer-controlled platform draughter are discussed in the view of the control Theory in this paper.
本文从控制理论的角度出发分析了影响微机控制的中型绘图机精度的各种因素。
This paper introduces the hardware and the software of microcomputer control system for sign typewriter on the railway vehicle bearing.
本文介绍铁道车辆轴承标牌打字机的微机控制系统的硬件结构和软件特点。
This paper introduces a computer system of temperature control device by using a single chip microcomputer as an intelligent unit .
本文介绍一种以单片机作为智能单元的计算机温度控制装置。
So the recent introduction of the microcomputer has provided a further impetus towards the possibility of on-line optimization, or true adaptive control, within the missile itself.
最近微型计算机的出现，一定会促进联机最佳化，或者导弹内部的真正的适应控制的可能性。
Microcomputer control of thyristor conduction Angle in controllable reactor and the matter to be noted are introduced. Experimental results and oscillogram are given.
介绍了可控电抗器晶闸管导通角的微机控制及应注意的问题，并给出了试验结果和波形。
The article has detailed the hardware and software design of this microcomputer control system.
详细介绍了这个微机控制系统的硬件电路及软件设计。
Based on the analysis of the theory of vulcanization, the control of rubber vulcanization, the construction of microcomputer control system, hardware and software design were described.
在分析橡胶硫化机理的基础上，阐述了胶料硫化的控制方法、微机控制系统的组成、硬件配置和软件设计。
The detector based on virtual instrument is proposed to ensure the control performance of microcomputer control system for diesel locomotive.
为了保证内燃机车微机控制系统的控制性能，提出采用基于虚拟仪器的检测装置。
Logic control unit (LCU) for electric locomotive is a new type of contactless control equipment combining microcomputer and power electronic devices.
电力机车逻辑控制单元(LCU)是一种用微机和电力电子器件构成的新型无触点控制装置。
The punch refitted with microcomputer numerical control is suitable for the shaping of thin metal plates by punching, which requires moving along two-dimensional path and locating accurately.
这台改装的微机数控冲床，适用于需要沿两维路线移动并精确定位的金属薄板冲压成型。
Logic control unit (LCU) for electric locomotive is new type of contactless control equipment combining microcomputer and power electronic devices.
电力机车逻辑控制单元(LCU)是一种用微机和电力电子器件构成的新型无触点控制装置。
The hardware design of the microcomputer detection and control part of the system are described mainly.
着重介绍了系统微机检测与控制部分硬件的设计。
Under the control of the microcomputer this system not only can automatically determine the optimal control pulse sequence of the step motor, but also can control the step motor optimally.
在微机的控制下，该系统既能自动确定步进电动机的最优控制脉冲序列，又能对步进电动机实施最优控制。
应用推荐