This article takes TMS320F2812 as a core, adopting fuzzy PI control method to design an AC servo control system.
本文就以TMS320F 2812为核心，以模糊pi控制策略设计交流伺服系统。
Through the analysis of all kinds of control methods, the paper used fuzzy control method to design the controller.
通过对各种控制方法的分析，本文采用了模糊控制方法来设计控制器。
This paper USES a guaranteed cost control method to design a controller of the grinder spindle system supported by electromagnetic bearings (EMBs).
该文采用保成本控制方法设计电磁轴承磨床电主轴系统控制器。
Using sliding mode variable-structure control method to design controller, carry on stimulating and make contrast with the traditional PID in order to justify its superiority in stabilized effects.
利用滑模变结构控制方法设计控制器、进行仿真，并与传统的PID控制进行仿真对比，以验证其在减摇效果上的优越性。
The influence of the refrigerating capacity in design and control is analysis in this paper, a control method to raise the running economy is suggested.
本文分析了制冷量在设计和控制各环节中的影响，给出了一种提高制冷器运行经济性的控制方法。
Depending on the degree of safety to achieve structural control technique like active isolation, passive isolation or conventional seismic design method can be chosen.
依据所要达到的安全程度，可选择采用主动隔震结构控制技术、被动隔震结构控制技术或传统的抗震设计方法。
Discussion was made on the optimum design method for MTLD system to control the seismic responses of tall steel structures.
本文对高层钢结构MTLD地震反应控制优化设计方法进行了初步的探讨。
For design of STATCOM device the different control method and main electric structure can be selected according to different requirements for system and control targets.
在设计STATCOM装置时，可根据系统要求的不同，控制目标的不同，选取不同的控制方法和主电路结构。
This method may be used to control and predict the solidified grain size, provide a concise means for optimizing experimental design, and be of big practical value.
这表明，用这一方法可对凝固晶粒尺寸进行控制和预测，为优化实验设计提供了简便实用的手段，具有较大的实用价值。
The medicine diagnostic system is a complex system. It is not satisfactory to design by using general fuzzy control method.
医疗诊断系统是一个复杂系统，用一般的模糊控制方法进行设计效果并不令人满意。
The two-stage design theory under planning control gives a good method to decompose the designs.
规划控制下二阶段设计理论提出了一种对设计问题进行规划分解的有效的方法。
This paper proposes a new method to design state feedback controller for networked control system (NCS) with time-varying delays.
为带时变时延的网络化控制系统提出了一种新的状态反馈控制器的设计方法。
Method: Random and single blind design was used to divide 160 patients with acute cerebral infarction into the treatment group (80 cases) and the control group (80 cases).
方法：采用随机单盲设计，将160例急性脑梗塞患者随机分为治疗组和对照组各80例。
Different from the usual management and control software, this software is unique in its design method and proved to be exact.
由于与一般的管理和控制软件不同，该软件设计方法独特，使用方便，化简迅速，结果准确。
The robust control method based on signal compensation is applied to design controllers for each joint subsystem.
将利用基于信号补偿的鲁棒控制方法设计机器人的子关节系统控制器。
Presented the routing method of the packet going to the RPR ring network and its control plane and forwarding plane design.
研究提出了报文上RPR环网的选路表方法，以及控制平面和转发平面的设计实现。
After Lyapunov function is DE - rived, with theoretical analysis, energy-based control design method is discussed in order to solve the global stability problem.
并在构建李雅普·诺夫函数及理论分析的基础上提出了基于能量的控制器方法。
This design method is further extended to solve the design problem of robust control.
该方法可进一步扩展到解决鲁棒控制问题。
According to the characters of Dynamic Inversion method in making multivariable control system decoupling, we design a set of control law for every direct lift control mode.
本文针对动态逆控制方法的不足之处提出了相应的改善措施，并取得了较为理想的效果。
The design method is simple, effective and easy to realize by digital control.
其设计方法简单有效，易于实现数字控制。
This paper introduce design method and work principle on the application of SCM to aircraft gun projecting control, and provide hardware circuit and software design process.
本文主要介绍了单片机在航炮射弹控制中的设计方法和工作原理，给出了硬件电路和软件设计过程。
The debugging and running practice proves this method is effective and has a use for reference to design the general industrial control system software.
经过实际调试和运行，证明该方法是有效的，对开发通用的工控软件具有借鉴意义。
The method how to design the control module of liquid crystal device controller is introduced.
文中重点介绍了液晶控制器中控制模块的设计方法。
The paper presents the system design method and control process of applying frequency converter to realize water provision in constant pressure for high building.
本文介绍了用变频器实现高层建筑恒压供水的系统设计方法和控制过程。
The method combines fuzzy control technology with PID algorithm and applies the multi mode control to design a control system of temperature and humidity.
该方法把模糊控制技术和PID算法结合起来，采用多模态分段控制设计出温湿度控制系统。
The text expatiate the tenet and method that should be follow to control project cost during pre design and detailed design for construction section.
阐述了在初步设计和施工图设计阶段控制工程造价应遵循的原则与方法。
The modern control theory is applied to develop the design principle and method for automatic control of irrigation canal.
本文用现代控制理论研究渠道自动控制的设计理论和方法。
A novel general multi-phase signal control method was presented based on the idea of object - (oriented) design to increase the efficiency of intersection signal control.
为提高城市道路交叉路口信号控制的效率，采用面向对象的设计思想，提出了一种新的通用多相位信号控制策略。
When design the control method of long-time cycle movement, whiff thruster is used to assistant the control system.
其中长周期运动控制律设计时，结合了喷气推力控制来辅助偏置动量控制；
This result improves the efficiency in developing PMSM control system and provides effective method to analyze and design the system.
该研究结果提高了永磁同步电机控制系统开发效率，为永磁同步电机控制系统的分析和设计提供了有效的途径。
应用推荐