• All the control fitting is from international high-end brands, with low failure rate and high precision.

    该机所有控制配件全采用高端品牌,故障低,性能稳定。

    youdao

  • On Saturday, he brought down a long ball from Edwin van der Sar in the middle of the park with the kind of instant control that would have him fitting in at Camp Nou.

    上周六,他在中场接范德萨的长传球,用一种可以让他适合诺坎普的方式。

    youdao

  • By using this technique, the dynamic uncertainty contribution of an analytical measurement system comprises of uncertainties of quality control (QC) sample measurements and linear fitting.

    本研究认为,采用该技术来进行分析测量系统的动态不确定度评估,其贡献量可由质控样品(QC)和线性拟合两部分合成。

    youdao

  • Air source treatment unit, solenoid control element, actuation element and tube fitting.

    气源处理元件、电磁控制元件、执行元件、管接头等。

    youdao

  • Connect the air line for the bleed load control to the fitting in the upper shroud.

    将引气负载控制的空气管道连接到上保护罩的接头上。

    youdao

  • Software design includes: writing programs of rotate speed computing module, ignition timing computing module and ignition control module and curve fitting.

    软件设计部分包括转速计算模块、点火时间计算模块、点火控制模块和曲线拟合等的程序编写。

    youdao

  • Moreover, this paper puts forward an adaptive method of control valve based on open-loop and enhances measure accuracy through curve fitting method.

    同时,本文提出一种基于开环的阀门开度自适应控制方法,通过在线曲线拟合的方法提高阀门控制的精度。

    youdao

  • The digital collection and intelligent control is realized by low-power consuming MCU and high precision ADC. The fitting accuracy of the static feature curve is improved by using the LMBP algorithm.

    该方案采用低功耗MCU和高精度ADC实现对流量的数字化采集和智能控制,应用LMBP算法实现高精度的静态特征曲线拟合;

    youdao

  • A non-linear higher order polynomial fitting method is also proposed to transform the resistivity profile into seismic velocity profile under the control of a micro-well logging velocities.

    同时,提出了在少量微测井控制下,由电阻率剖面转换地震波速度剖面的非线性高阶多项式拟合算法。

    youdao

  • When fitting each contour line, the points measured by non - contact measuring system are as the top points about control polygon for forming EE spline curve.

    在拟合每个轮廓线时,先用非接触测量系统测出的数据反算出ee样条曲线控制多边形的顶点。

    youdao

  • However, the digital random vibration control systems currently based on power spectrum fitting can only generate random vibration exciting signals with Gaussian probability distribution.

    然而,目前基于功率谱均衡的数字式随机振动控制系统只能产生高斯分布的随机振动激励信号。

    youdao

  • This paper introduced the test, calculation and fitting of the surge curve of the coal gas compressor and anti-surge control strategy.

    介绍煤压机喘振线的测试、计算和拟合以及防喘振控制策略。

    youdao

  • On the practical base, the article analyzes endanger of low-voltage motor control circuit without fuse and necessary of fitting the fuse in the circuit.

    在实践的基础上,分析了低压电动机控制回路不装熔断器的危害性,及其装设熔断器的必要性。

    youdao

  • But the materials used in fitting-up are inflammable and against the regulations of fire-control.

    您这里用易燃材料进行装修,违反了有关消防法规。

    youdao

  • A virtual hand kinematic model is established, and a new calibration method based on curve fitting is presented in order to gain accurate data to well control the motion of the virtual hand.

    提出一种曲线拟合的校准方法,以获取精确的数据,更好地控制虚拟手的运动。

    youdao

  • The basic principle of fuzzy control is introduced, and a fuzzy controller fitting for vision -guided mobile robot's road following system is designed.

    在介绍模糊控制基本原理的基础上,设计了一种适用于利用视觉导引的移动机器人路径跟踪系统的模糊控制器。

    youdao

  • Finally, PID control and curve fitting algorithm were discussed together with testing data analysis.

    最后对系统中采用的PID控制和曲线拟合算法进行了描述,并对测试结果进行了分析。

    youdao

  • An automatic control system of field irrigation has been studied for. Reasonable irrigation and saving water and fitting to water-saving shallow and wet irrigation scheduling.

    为做到合理灌溉,节约用水,配合采用节水型的浅湿灌溉制度,研制了一种田间灌溉自动化控制系统。

    youdao

  • There are three factors in the control of fitting remolded soil model: composition of soil body, stress history and consolidation.

    土体材料的成分、应力历史及固化联结是重塑模型土拟合控制的三个方面。

    youdao

  • Back in the 80s low voltage lighting with transformers was new technology, now we are close to having a computer inside every light fitting to control LEDs!

    早在上世纪80年代,带变压器的低压照明已经是新技术了,而现在,我们就差没在每个灯光装置里面置入一台“电脑”来控制所用的LED灯了!

    youdao

  • Enhancing the quality of vehicles body welding and fitting method are the control of size indicators and the comprehensive control of all factors leading welding and fitting errors.

    介绍提高汽车车身焊装质量的方法是通过控制尺寸指标和对产生焊装误差的各方面因素进行合理、综合的控制。

    youdao

  • It points out that as long as seriously control the quality of board, unified design standard, earnestly operation during construction and improved fitting process, t...

    指出只要严格控制板材质量、统一设计标准、施工中认真操作、改进装修工艺,轻质条板墙体裂缝是可以解决的。

    youdao

  • New definition of concurrent conflict in collaborative design is presented and a fitting framework of concurrency control is designed.

    提出了协同设计并发冲突定义和相应的并发控制框架。

    youdao

  • As a large inertia, large elasticity and variable load control system, all the currently control systems is not fitting the anchor chains tension tester.

    对于锚链拉力试验机这种大惯量、大弹性、变刚度负载的系统,一般的控制系统都不太适合。

    youdao

  • This product for home use, air conditioning regulator fitting, changes according to the ambient temperature change, plays the temperature control role.

    此产品为家用、空调调节器的配件,根据环境温度的变化而变化,起到温度控制作用。

    youdao

  • This Paper has theoretically analysed curve fitting method of problem to solve trajectory for tank fire control systems, and has described some characteristics which the method possessed.

    本文对坦克火控系统弹道解算问题中的曲线拟合法进行了一定的理论分析,指出了这一方法所具有的某些特性。

    youdao

  • This thesis researches spectral imaging system's control software, data processing software and characteristics spectral curve fitting software design.

    本文主要研究了光谱成像系统控制软件和数据处理与特征光谱曲线拟合软件的设计。

    youdao

  • Curve fitting is a curve approaching process under definite error and the number of control points throughout surface is ascertained after curve fitting completed.

    其中曲线拟合是一个在给定误差下进行曲线逼近的过程,当曲线拟合完成之后,整个曲面的控制点的数目也就确定了。

    youdao

  • Curve fitting is a curve approaching process under definite error and the number of control points throughout surface is ascertained after curve fitting completed.

    其中曲线拟合是一个在给定误差下进行曲线逼近的过程,当曲线拟合完成之后,整个曲面的控制点的数目也就确定了。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定