This paper discussed the design of low cost experimental installations and their applications in the experiments on the study of computer control systems by physical simulation.
本文探讨“计算机控制系统”低成本实验装置的设计、制作及其在研究型实验中的应用，即物理仿真技术的应用。
Computer applications including scientific computing, data processing and information management, automatic control, computer-aided design manufacturing and testing, the system simulation.
计算机应用领域包括科学计算、数据处理和信息管理、自动控制、辅助设计制造和测试、系统仿真。
It describes the fuzzy PID-type controller design of the alkali boiler water level, the build of 2-d control table, the realization of the computer design and simulation of the controller.
以碱回收炉的水位控制为例具体论述调整系统控制量的模糊pid控制器的设计、2- D控制表的建立、以及控制器计算机设计与仿真的实现。
The design of the pantograph's active control system and the study of the simulation results reduce the fluctuation of the contact force theoretically and thus improve the current collecting quality.
通过受电弓主动控制系统的设计和对其的仿真研究，理论上降低了弓网系统接触压力的波动，从而改善了受流质量。
The numerical simulation for proposed secondary voltage control system on classical New England power system is executed, and simulation results show that the proposed design scheme is effective.
最后用经典的新英格兰系统进行了数字仿真，仿真结果表明了文中所提设计方案的有效性。
For simulation of winding tension control system using computer, the parameters about system design and the system performance with these parameters can be quickly obtained.
采用计算机对卷取张力控制系统仿真，可以快速获取系统设计参数和这一参数时的系统性能，使现场调试变得方便快捷。
The design and realization technology suitable for integrated real-time simulation device of UAV flight control are presented. The practice and application is emphasized.
本文给出了适于无人机飞行控制的集成化实时仿真设备的设计与实现技术，着眼于工程实践和应用。
This thesis discusses the Performance-based Fire Protection Design, the basic knowledge of smoke control and theoretic basis on smoke simulation.
论文论述了建筑防火性能化设计，烟气控制的基本知识和烟气模拟的理论依据。
The simulation debugging is an important process in the perfect design of the application programs for computer control systems in order to ensure system performance and reliability.
工控应用程序的完善设计是保证计算机控制系统的性能与可靠性的一个重要措施，而仿真调试是使应用程序完善化的一个重要环节。
With a lot of tests and simulation analyses from the weight matrix selection of quadratic optimum control design, the principles of selecting weight matrix are summed up.
本文在线性二次最优控制设计中关于权矩阵的选取问题作了大量的试验与仿真分析，得到了关于权矩阵选取的一些基本规律。
In the chapter four, I discussed the design of the maglev train braking control system and lay out the simulation results. The results show that the design is feasible.
第四章讨论了磁浮列车紧急制动控制系统的设计，并给出了列车紧急制动仿真结果，仿真结果表明控制器的设计是有效的。
From the results of simulation, the control strategy and simulation models can meet the need of the design target for the hybrid electric city bus powertrain.
仿真结果表明，本文所提出的控制策略和仿真模型能满足该混合动力城市客车驱动系统的设计要求。
The simulation model of air defense fire oppugning effect was based on simulation design theory, simulation control mechanism, model internal structure and model algorithm.
从仿真设计原理、仿真控制机制、模型内部结构和模型算法三方面研究防空火力抗击效果的仿真模型。
Honeywell also offers solutions for industrial and cyber security, advanced process control and optimization, process design simulation and operator training simulation.
霍尼韦尔还为工业和网络安全、先进过程控制与优化、流程设计和操作人员训练模拟仿真提供解决方案。
The major components of the full range simulation model and their design are analyzed, such issues as model configuration, model debugging and auto tuning of control parameters are discussed.
文中介绍了控制回路全仿真模型的组成与设计，讨论了模型自动组态、调试及控制参数自整定等问题。
Proposed the network remote control simulation system design and realization plan, which include the system main composition module and the design critical point.
提出了网络远程控制仿真系统的设计实现方案，给出了系统的主要组成模块和设计关键点。
Finally, present the simulation result of above design combining seeker handing-off model, compound control system model, projectile body kinematics model and target maneuver model.
根据以上设计，结合导引头模型、复合控制系统模型、弹体运动学模型、目标机动模型，给出上述设计的仿真结果。
The simulation result shows that the DSP controller has very fast dynamic response and unity power factor, flexible control and simplified hardware design.
仿真结果表明，DSP控制器可以获得较高的功率因数，且具有快速的电路动态响应、灵活的控制方法以及简洁的硬件设计等特点。
EWB is a excellent software of electronic circuit design and simulation. Its main window consists of menus, toolbars, parts bin toolbar, control pushbutton and drawing area.
EWB是一个优秀的电子电路设计与仿真的软件，主窗口由菜单栏、工具栏、元器件库和仪器仪表栏、控制按钮栏、电路工作区组成。
It is shown by theoretical analysis and simulation that this control low, which can applied to semi-close loop and full-close loop system, is simply in design and on-line realization.
理论分析和仿真结果表明：该控制方法设计简单，便于在线实现，并能同时应用于半闭环系统和全闭环系统。
According to the feature of this system, through static design and selecting component's parameter, then carrying out dynamic model's establishment and simulation of several kinds control strategies.
根据系统的特点，通过静态设计，选取元件参数，然后通过动态建模分析以及几种控制策略的仿真研究。
The paper deals with the design of fire control system simulation trainer with modern high technique, and point out implementation approach of specific modular.
提出了一种利用现代高新技术的火控系统模拟训练器设计的思路，并指出了具体模块的实现方法。
For accomplishing its optimizing design, real simulation and control, you must have a full knowledge of the manipulating structure's kinematics and dynamics.
为了实现六自由度摇摆台结构的优化设计、实时仿真和控制，对六自由度摇摆台运动学和动力学特性作全面的了解是很有必要的。
The simulation analysis of accident consequence is the basis of prediction and control of such accidents. The simulating results can provide valuable data for disasters prevention and safety design.
事故后果模拟分析是进行灾害防治的基础，模拟分析的结果能够给化工企业防灾救灾和安全设计提供重要参考。
Based on the implementation wrong method, the paper designs and debugs the joints'controllers by use of the control system design elements in the software ADAMS, and simulation is implemented.
此外，本文还利用ADAMS环境中的控制系统设计要素对该机器人进行了基于试行错误方法的关节控制器设计和调试，并进行了仿真。
Design the system to develop control procedures and, in this simulation platform debugging.
设计根据系统，开发控制程序并在此平台上进行调试仿真。
Simulation result indicates that the equivalent moment derivatives model can be used in the evaluation of aircraft conceptual design and flight control system design.
验证表明，等效力矩导数模型可用于评估设计方案或指导飞行控制系统设计。
Based on the method of all-coefficient adaptive control, the paper gives the design of the tracking and pointing control system of antenna on satellite and the study of its digital simulation.
根据全系数自适应控制的原理，进行了卫星天线跟踪指向控制系统的设计和数学仿真研究。
The article also presents the design theory and implement of molding process control, simulation and machine - time estimation. finally, the control software with above functions is developed.
论文也对成型加工过程进行了较为细致的分析，并在此基础上，提出了成型过程式控制制、成型过程模拟及成型时间预测功能的设计原理和方法。
The article also presents the design theory and implement of molding process control, simulation and machine - time estimation. finally, the control software with above functions is developed.
论文也对成型加工过程进行了较为细致的分析，并在此基础上，提出了成型过程式控制制、成型过程模拟及成型时间预测功能的设计原理和方法。
应用推荐