请出示武器检查卡。
The second is the driver design for the motion control card.
二是运动控制卡的驱动程序设计。
Temperature control card protects setting value and avoids change by mistake.
温度控制卡设计，保护设定的温度值，防止误改。
Line, only to burn a group of temperature control card or a group of thermocouple.
线的话，只是烧掉一组温控卡或一组热电偶。
The design of step motor control card is based on DSP technique and PCI bus technique.
步进电机控制卡的设计采用了DSP技术和高速pci总线技术。
The control card may indicate that the program is on the master system tape or on CARDS.
控制卡可以指出程序是在主系统带上还是其他卡片上。
A design of the open motion control system based on PC and motor control card was presented.
提出一种基于PC和运动控制卡的开放式运动控制系统的设计方案。
The hardware of system uses a PC and a DSP motion control card which complete motion Control.
系统在硬件上通过一台工业计算机，一块DSP运动控制卡来实现机器人的运动控制；
The control system hardware platform is composed of motor, driver, motion control card and computer.
控制系统硬件平台由电机、驱动器、运动控制卡和主机构成。
CNC system hardware design and the completion of the step motor drives, motion control card selection.
数控系统硬件设计中完成了步进电机及驱动器、运动控制卡的选定。
The paper introduces the hardware and software design of an AC servo motor control card based on 80C196KC.
介绍自行研制的基于80C196KC单片机的交流伺服电机控制卡的硬件设计及其软件实现。
The display control card compatible with all kinds of LCD and its bus interface support many kinds of MPU.
该显示控制卡可以控制全类型LCD，并且支持多种微控制器。
The motion control card is extensively applied in the high-level control unit of the motion control system.
运动控制卡是可以广泛应用于运动控制系统的上位控制单元。
The software and hardware design of intelligent robot cutting system based on motion control card are discussed.
本文先容了基于行为节制卡的呆板人智能切割体系的软硬件计划。
To continue to open the other temperature control card, should immediately check the various parts of the wiring.
要继续打开其他的温控卡，应立即检查各部分接线。
When the hardware control card is initialized accurately, the configuration information is declared to be correct.
当硬件控制卡正确初始化时，宣告该组态信息正确。
Hardware consists of microcomputer, stepping motor control card, stepping motor driver and stepping motor and so on.
硬件由微机、步进电机控制卡、步进电机驱动器和步进电机等器件组成。
The functionality of the Vacon 10 is incorporated into the flexible control card, called the Application Interface (API).
伟肯10的功能性被整合在了一张灵活的控制卡上，叫做应用程序界面(API)。
The open four-axis CNC system based on PC and motion control card can accomplish the cutting of various-angle welding plate.
并以基于PC和运动控制卡的开放式四轴数控系统实现支管端头的变角度焊接坡口面切割。
Software realization of LED Large Screen Display Offline Control card needs much complex work compared with that of video card.
相对于LED大屏幕显示器视频控制卡，脱机控制卡在软件实现上需要做较多复杂的工作。
An open and multifunctional laser die-cutting numeric control system was developed with PMAC motion control card and industry PC.
开发了由PMAC运动控制卡和工业PC机组成的开放式多功能激光模切加工数控系统。
Subsequent jobs in sequence for the same program must not contain the program control card or (when applicable) the binary card program.
同一个程序的后续作业中不能包含程序控制卡或者(如果适用的话)二进制卡片程序。
The control card identifies the source of the program, the category of all tapes, and the identification of library tapes when required.
控制卡识别程序的来源，所有磁带的种类，并且在需要的时候识别库磁带。
Measurement and control system are made up of the control host computer, motion control card and intelligent laser micro-displacement sensor.
以工业控制计算机为控制主机，选择了运动控制卡和智能型激光位移传感器，组成了测量控制系统。
In the meantime, by using an AC servo motor as the driving parts and based on the MPC02 motion control card, the open control system was formed.
同时采用交流伺服电机作为驱动元件，基于MPC02运动控制卡作为上位控制单元构建了开放式控制系统。
It is proved by the experiment that the control card has good real-time performance and stability, which can meet the requirements of motion control.
实验证明，该运动控制卡运行稳定、实时性好，能满足运动控制的要求。
The article exploits a special NC system based on DOS, choosing PCL-839 3-axis stepping motor control card, and analyzes the expansibility of the card.
文章采用PCL-839三轴步进电机控制卡开发了一套基于DOS的专用数控系统，并对该控制卡功能的扩展进行了分析。
This paper is based on developing the high-speed intelligent card, main control card of MSCIS interface system and device driver of the communication card.
论文是在研制MSCIS接口系统的高速智能通信卡、主控制卡和开发通信卡设备驱动程序的基础上完成的。
This article discussed the multi-thread technology application in numerical control system software design of flame cutter based on the movement control card.
讨论了基于运动控制卡的火焰切割机数控系统的软件设计中多线程技术的应用。
This article discussed the multi-thread technology application in numerical control system software design of flame cutter based on the movement control card.
讨论了基于运动控制卡的火焰切割机数控系统的软件设计中多线程技术的应用。
应用推荐