The slab quality was the key to the research of thin slab continuous casting and rolling process.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
The utility model relates to a traction device used for aluminum alloy continuous casting and rolling.
本实用新型具体涉及一种用于铝合金连铸连轧的牵引装置。
The CSP rolling line of MA Steel is one of the most advanced thin continuous casting and rolling lines.
马钢CSP生产线是当今技术最先进、装备水平最高的薄板坯连轧生产线之一。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
在薄板坯连铸连轧生产线中，加热炉的缓冲能力有时成为制约生产的关键。
It is of great importance to rhythm and coordination of the thin slab continuous casting and rolling process.
时间因素对薄板坯连铸-连轧流程的节律性、协同性而言，其意义尤为重要。
The longitudinal surface crack on thin slab is a serious quality defect at thin slab continuous casting and rolling process.
薄板坯表面纵裂是连铸连轧生产线上的严重质量缺陷。
A description is made of new technology for producing starter sheets of copper electrolysis by continuous casting and rolling.
介绍了连铸连轧法生产电解铜始极片的新工艺。
Based on the idea of integrated management, planning models including steelmaking, continuous casting and rolling are presented.
基于一体化管理思想，对炼钢、连铸和热轧计划模型进行了研究。
The product is applied to metallurgical industry, continuous casting and rolling mill, concrete machinery and spiral conveyer, etc.
产品应用于冶金行业、连铸轧机、水泥机械和螺旋式输送机等。
This paper introduces Nb microalloying technologies to produce HRB400 bar, which include steelmaking, continuous casting and rolling.
介绍采用铌微合金化生产hrb400钢筋的工艺技术，包括合适的冶炼、连铸和轧制工艺。
The several aspects to be considered in the construction of the thin slab continuous casting and rolling line are highlighted in this paper.
文中着重讨论了薄板连铸连轧生产线建设中应研究的有关问题。
Various problems in the application of Hazelett process to continuous casting and rolling for aluminum plate and strip are discussed in the article.
对哈兹列特工艺在铝板带连铸连轧应用中若干问题进行了探讨。
In this paper, mathematical model and FEM software for the simulation of thermal process during continuous casting and rolling of thin slab were developed.
本文针对连铸连轧的热过程，建立了各工艺的热过程的数学模型，并开发了相应的软件。
The thin slab continuous casting and rolling production line in Tang Steel is compared with the traditional process, the main quality control ways introduced.
对唐钢薄板坯连铸连轧生产线与传统热轧生产线轧制工艺特点进行了对比，介绍了该生产线在带钢轧制中所采取的主要质量控制手段。
The thin slab continuous casting and rolling process is a reforming technology in the steel industry, and it should be mastered and promoted step by step in China.
薄板连铸连轧工艺是钢铁工业的重大变革技术，要切实掌握和逐步推广。
This paper describes the production condition of cold rolled deep drawing quality steel (IF steel) by thin slab continuous casting and rolling technique in Bengang.
介绍了本钢薄板坯连铸连轧工艺生产冷轧深冲钢(IF钢)的情况。
Based on the simulation, some typical processes were investigated, and some useful Suggestions for the design of thin slab continuous casting and rolling line were proposed.
采用该软件对个别典型的工艺进行分析，为连铸连轧生产线的设计提出了有益的建议。
The primary requirement of cold-rolling feeds, and the equipment design, production management and material flow of thin slab continuous casting and rolling, were investigated in the paper.
本文通过分析冷轧基料的一般要求、薄板坯连铸连轧工艺的设备配置、生产组织和物流衔接，提出了薄板坯连铸连轧工艺大规模生产冷轧基料的具体措施和建议。
In the project of ASP1700 thin slab continuous casting and rolling, the system of mould width adjust in the continuous casting is equipped with the new digital alternating servo control system.
在济钢ASP1700薄板坯连铸连轧项目中，连铸机结晶器调宽系统采用了新型全数字交流伺服控制系统，代表当今世界最先进控制水平。
This dissertation is a part of the important and special project 'long products continuous casting and rolling line '(Item No. : 2001ba306b03) sponsored by Ministry of national science and technique.
本文是国家科技部重大专项课题“长材连铸连轧生产线”(课题号：2001 BA 306b03)的一部分。
Thin slab concast & conroll combines the near net shape continuous casting and the direct rolling together, thus to shorten the conventional continuous casting & rolling process.
薄板坯连铸连轧将近终形连铸与直接轧制相结合，缩短了传统连铸与轧钢工艺流程。
A suggestible solution is the combined production of thin slab continuous casting and continuous rolling together with strip casting, so that it will be complemental in superiority for both of them.
利用薄板坯连铸连轧和薄带铸轧组合方案生产不锈钢可以更好地形成优势互补。
The production of stainless steel flat products can be realized by adopting medium-sized slab continuous casting and continuous rolling technology.
利用中厚板坯连铸连轧生产不锈钢是可行的。
Comparing with the thin slab continuous casting continuous rolling and tradition rolling technology, their product character and technology character have been discussed.
通过比较薄板坯连铸连轧与传统热带卷生产工艺，对薄板坯连轧生产产品特点和工艺特。占、进行客观分析。
Emphasis was placed on the development of smelting reduction and near-net-shape continuous casting and continuous rolling technologies. Their challenge to refractories was also shown in this paper.
重点介绍了熔融还原和近终形连铸连轧技术的进展，并指出其在耐火材料应用上存在的某些问题。
The continuous casting rolling technology for nonferrous metals is a typical high efficiency, energy saving and short process method.
有色金属的连铸连轧、连续铸轧是典型的高效、节能、短流程加工技术。
The process of thin slab continuous casting and direct rolling is different from the traditional one.
薄板坯连铸连轧工艺的生产流程有别于传统工艺流程。
ON-line measurements of slab width during continuous casting and strip width as well as flatness during rolling are important.
连续铸造中板坯宽度和轧制过程中带钢宽度及平坦度的在线测量非常重要。
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
介绍了连铸连轧法生产电解铜始极片的新工艺。
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling(CSP)Process;
介绍了连铸连轧法生产电解铜始极片的新工艺。
应用推荐