Gear contact nonlinear analysis implicates up a lot of elements, so it is a complex problem.
齿轮的接触非线性分析由于牵扯到很多因素，因此是比较复杂的求解问题。
The mirror response based on bolt contact and the mirror deviation based on gravity and temperature loads are analyzed by contact nonlinear analysis method.
采用接触非线性分析方法对螺钉预紧时反射镜的响应及在自重和温度载荷作用下反射镜的变形进行了分析。
The analytical scheme of nonlinear contact mechanics is corresponded to that of Neural Network by Considering nonlinear functions as nerve cell translation functions.
通过采用非线性函数作为神经元的传递函数，使神经网络的非线性问题同力学的非线性问题得到统一。
Firstly, the contact theory and the method of solving nonlinear equations are summarized.
首先，概述有限元接触理论及求解非线性方程的方法。
To compute the stress of the cylindrical roller bearings under loading is a typical boundary nonlinear contact issue.
圆柱滚子轴承在载荷作用下的应力分析，是典型的边界非线性的接触问题。
Take the curve negotiating vehicle and curve continuous beam bridge as two vibration subsystems connected by nonlinear contact force between wheel and track.
将曲线通过车辆和曲线连续梁桥分为两个由非线性轮轨接触力联系的振动子系统。
The contact problems are non-linear problems, which relate to stress concentration, local boundary nonlinear, no-reversibility of shear force, and so on.
接触问题是非线性问题，涉及到应力集中、局部边界非线性、切向力的不可逆性等一系列非线性问题。
The dynamic behavior of a kind of SIR epidemiological model with general nonlinear saturated contact rate is considered under vaccination.
研究了一类预防接种情况下具有一般非线性饱和接触率SIR流行病模型动力学性态。
Because the boundary of contact region cannot be determined in advance, these equations are weak nonlinear ones.
因接触区的边界预先不能定出，故这组方程为弱非线性方程。
The nonlinear dynamic response of piping with gapped supports is analyzed by the finite element method for the dynamic contact problem.
用动力接触有限元法对带间隙支座的管系非线性动力响应进行分析。
The interaction between wheel and rail conforms to the Hertzian nonlinear elastic contact theory.
轮轨相互作用遵从赫兹非线性弹性接触理论。
Fortunately, our team has obtained an elastic energy expression and established a set of nonlinear elastic equations on granular matter based on indications of Hertz contact mechanics.
有幸的是，在赫兹接触力学的提示下，本课题组找到了一个合适的弹性能表达式，并建立了一组关于颗粒物质的非线性弹性方程。
The first method was loaded tooth contact analysis(LTCA), the second method was to solve nonlinear dynamics equation and the third method is to integrate torsional vibration model with LTCA.
论述了螺旋锥齿轮动力学研究的三种主要方法，即加载接触分析（LTCA）、解多维非线性方程组的方法，以及加载接触分析与周向振动模型结合的仿真分析方法。
New on old concrete adhesive specimen and whole specimen are done by nonlinear module in ANSYS in which large deformation and contact are simultaneously considered.
采用ANSYS非线性模块，同时考虑工作过程中大变形、接触等多种非线性因素，对新老混凝土粘结试件和整体试件的复合受力进行数值模拟。
The contributive equation of discontinuous interface to the system of equations is derived and nonlinear iterative algorithms for simulating the contact state of a discontinuous interface are studied.
为此，推导了不连续面对整体平衡方程组的贡献方程，研究了模拟不连续面实际接触状态的非线性迭代算法。
The contact behavior between the reinforcement pad and the vessel shell was analyzed with nonlinear method of the software ANSYS.
采用ANSYS软件的非线性分析方法，模拟分析了补强圈与壳体之间的接触行为。
The results are summarized, so as to express the breakdown voltage as nonlinear function of the spacing of the contact.
试验结果证明，触头间隙的击穿电压是触头间距的非线性函数。
The equivalent plate thickness method can be used in choosing type and rough calculating in primary design. The nonlinear contact method can be used in final calculating and guiding model test.
等效板厚法可用于初步设计时选型、初算，而非线性接触方法可用于最终计算及指导模型试验。
It is especially suitable for analyzing problems of nonlinear, large deformation and dynamic systems due to the explicit finite-difference scheme and the automatic contact detection skill.
由于该方法采用显式差分方法和自动接触检索技术，故尤其适合于求解弹塑性、大变形和动力问题。
In this paper, the nonlinear vibration characteristic of contact system was studied by using the experimental method and the finite element method.
本文利用实验和有限元法相结合对接触系统的非线性振动特性进行研究。
Changes in handling the highly nonlinear contact condition problem is also very effective, such as molding problems.
处理接触条件变化的高度非线性问题也非常有效，如成型问题。
Taking ANSYS Workbench as a tool, this paper simulates well the bearing-conjunction problem by means of building nonlinear contact between ball and rolling channel of bearing.
利用ANSYS有限元计算软件，采用接触非线性与耦合自由度两种方法对亚硫酸罐车车体进行有限元结构分析，并就两种方法的计算结果作了详细的对比。
The simplified prepressing-contact spring-damping system was studied in this dissertation. The nonlinear dynamic characteristic of this system was research by experiment method.
本文以简化的预紧接触式弹簧阻尼系统为研究对象，着重于用试验方法来研究系统在动态载荷作用下的非线性动力学特性。
Because of the complexity of the car door's structure, the finite element nonlinear analyses under the two load cases have to deal with contact problems.
由于轿车车门结构的复杂性，在这两种载荷下的分析计算又涉及到有限元接触问题。
Material nonlinear and contact problem in connecting threads are considered in formulation.
非线性问题和螺纹间的接触问题。
Material nonlinear and contact problem in connecting threads are considered in formulation.
非线性问题和螺纹间的接触问题。
应用推荐