The communication of the master computer and subordinative computer adopts RS232 serial interface, which adapt the long distance communication.
微机和下位机的通讯采用RS232串行接口，适用于远距离通讯。
Network interface unit (NIU) is an interface device between the control computer and the communication network.
网络接口单元（NIU）是控制计算机与通信网络进行交互的一种接口设备。
Making use of USB technology, adopting USB module CH375, realizing communication between USB interface of many detection channels and computer in accelerator nuclear radiation monitoring system.
利用USB接口技术，采用US B模块CH375，在加速器核辐射监测系统中实现了多个探测通道usb接口与计算机通信。
Through the communication between PC and RS-232 interface, a small testing system for industrial field can be directly formed controlled by computer.
通过RS- 232接口与PC通讯，可直接构成由计算机控制的小型工业现场测试系统。
Based on industry's Ethernet, the paper introduced the systematic hardware composition and designed the data communication interface between the system and the production control computer.
以工业以太网为基础，介绍了系统的硬件组成，设计了与生产控制计算机之间的数据通信接口。
PCI is an ideal interface for high-speed communication between DSP application system and general computer.
PCI是DSP应用系统与通用计算机高速通信的理想接口。
Through balancing the excellences and disadvantages between USB and IEEE1394, we selected the USB2.0 interface to perform the communication between embedded system and computer.
通过对比USB与IEEE1394的优缺点，本课题选择了USB2.0协议作为嵌入式应用系统与计算机的通信接口方案。
It is both simple and practical by adopting usual computer and making it connect with NC system through interface of RS232 for communication.
如果采用普通计算机，通过RS232接口，实现与NC系统的通讯，就简单实用得多。
The technology of interface and communication for 89c51 single-chip microcomputers and personal computer is introduced and its application is given in this paper.
以89c51为例介绍了多片机与上位微机组成所分布式测控系统的硬件接口与通讯技术，并给出了该技术的应用实例。
The main description is on designs such as overall scheme, control program, communication interface between PLC and upper computer, data read program.
本文介绍了立体车库的PLC控制系统总体设计、控制程序设计、PLC与上位机接口的通信方案设计、计算机从PLC读取数据的程序设计等。
The problems of hardware configuration and computer communication interface existed in original system are pointed out.
提出了原来系统中硬件结构及计算机通信接口的不合理方面的问题。
The data communicating between the data sampling unit and the computer adopts RS485 fieldbus. At the same time, the communication protocols and RS485 communication interface are designed.
前端数据采集装置和后台上位机之间数据通信采用RS485总线，设计了RS485通信接口电路和通信协议。
Brain-Computer Interface (BCI) systems support direct communication and control between brain and external devices without use of peripheral nerves and muscles.
脑-机接口系统是一个不依靠外周神经和肌肉而实现大脑和外部设备之间进行直接的交流和控制的通道。
Using the RS232 (9 pins) as serial interface can carry out the communication between computer and controller. This system adopts the binary form to transmit the data.
通过RS232（9）脚串口可实现计算机与控制器的双向通信，本系统采用二进制形式传输数据。
Connect the RS232C of FANUC0's NC system and computer's interface, realize the communication among machine tool and computer. Pick up the information of parameter in the system and alarm information.
利用FANUC0数控系统具有RS 232c接口与计算机联网，实现数控机床与计算机间的通讯，进行数控系统参数、报警信息和加工过程状态信息提取。
Moreover, in order to control system operation and monitor real-time battery status effectively, it also develops a centralized computer control system interface based on CAN communication network.
此外，为了有效地控制系统运行及实时监测电池状态，还设计了以CAN通信网络为基础的集中式计算机监控系统界面。
We choose USB (Universal Serial Bus) as the communication interface of DSP and the computer which can fulfill up data transfer and the control to DSP.
系统选用USB(通用串行接口)作为和上位机通信的接口，实现处理数据的上传以及上位机对DSP的控制。
Brain-computer interface (BCI) systems support direct communication and control between brain and external devices without any use of peripheral nerves and muscles.
脑—机接口系统是一个不依靠外周神经和肌肉组织等而实现大脑和外界装置之间直接的交流和控制的通道。
The intelligent controller has the communication capable interface and is controlled by computer via fieldbus, therefore it is able to have function of remote me…
智能型控制器带有可通信接口，通过现场总线由计算机控制，实现供电系统的遥测、遥调、遥控和遥信功能。
Comes with RS232 output interface, data and computer, printer or other communication between devices.
自带rs232输出接口，实现数据与电脑、打印机或其它设备之间的通讯。
The interface between SDRM and FPGA was designed, and mutual communication between the serial port of the computer and SDRAM was realized.
在此系统之上实现了计算机串口与SDRAM之间的相互通信。
Based on introduction of communication integrated circuit CSC5087, SC8870, the interface with singal chip computer and its application are presented.
在介绍通讯集成电路CSC5087和SC 8870的基础上，给出了与单片机的接口方法和应用。
Such as the communication between deaf-mute and normal person, multi-model interface of Virtual Reality, TV news in Sign Language, intelligent human - computer interface etc.
聋哑人与正常人之间的交流、虚拟现实中的多模式接口、手语新闻、智能人机接口等。
This paper introduces how to debug embedded software by Ethernet interface in the embedded debugger. The network communication between the host computer and the board has been implemented.
本文介绍了在嵌入式调试器中如何通过以太网口进行嵌入式软件调试，实现了主机与开发板之间的网口通信。
In dealing with the communication between host computer and CNC system in FMS, EIA RS-232C serial interface and HDLC data link are used.
本文讨论用EIARS- 232c串行接口作为通讯线路，并选用国际链路层通讯协议HDLC进行FMS中主机与CNC系统的通讯。
The procedure of the development of the software, the realization of the remote communication and the design of man-computer interface are useful for the design of similar system.
论文中所讲述的关于开发气象数据采集系统软件的过程，以及如何实现远程通信和如何设计合理的软件的人机界面的方法对开发同类型的应用系统具有一定的参考价值。
A brain-computer interface (BCI) is a communication system that does not depend on the brain's normal output pathways of peripheral nerves and muscles.
脑机接口是指不依赖脑的正常输出通路，即外周神经和肌肉的信息传输通路。
He mainly engages in the creation and teaching of visual communication design and in the study of mutual interface design of computer multi-media.
主要从事视觉传达设计教学与创作，并致力计算机多媒体交互界面设计研究。
VB programming is used to prepare the operation of motor control interface on the host computer, and apply RS485 communication programming to achieve data exchange.
在上位机的程序设计中，采用VB编写电机控制的操作界面，并应用RS485通信实现与下位机的数据交互。
VB programming is used to prepare the operation of motor control interface on the host computer, and apply RS485 communication programming to achieve data exchange.
在上位机的程序设计中，采用VB编写电机控制的操作界面，并应用RS485通信实现与下位机的数据交互。
应用推荐