The ALQ-99 Tactical Jamming System (TJS) is a fully integrated computer controlled support jamming system.
AN/ALQ-99战术干扰系统是一套高度一体化的计算机控制的保障干扰系统。
The trend toward hybrid and electric vehicles will only accelerate the software shift-electric cars are completely computer controlled.
向混合动力以及电动汽车的发展趋势将会加速向软件的转移，其中电动汽车完全由电脑控制。
A computer controlled magnetic memory scanning device has been developed. The device plays an important role in the metal magnetic memory detection.
研制了由计算机控制的磁记忆自动扫描装置，该装置在金属磁记忆检测中起到非常重要的作用。
The result shows that this system manages the computer controlled with quickness, real-time, and efficiency and achieves the expected aim of the design.
结果表明，该系统能够快速、实时、高效地实现对被控计算机的管理，达到了设计的预期目标。
So it's very important for the manufacture of space-based optical system to master the computer controlled optical surfacing (CCOS) technology of SiC mirror.
掌握了碳化硅质反射镜的数控光学加工技术对于我国空间相机的制造具有重要意义。
The computer controlled the rocket firing.
计算机控制火箭引擎的发动。
A computer controlled system of drill stems is introduced in this article.
文章介绍了一个钻杆对焊计算机控制系统。
Micro-computer controlled AC voltage stabilizer is a device of new technology.
微机控制交流稳压器是一种新技术。
In this paper a new computer controlled electric upsetting system is introduced.
本文介绍一种新型电镦机计算机控制系统。
A very basic requirement for a computer controlled process is a flow chart or logic.
对电脑控制过程的最基本的要求是流程图和逻辑控制。
Design of computer controlled wide range frequency response measurement system is introduced.
介绍了计算机控制的宽带频率特性测试系统的设计。
This paper introduces computer controlled automatic quality testing system for refrigerators.
介绍了计算机自动控制的家用冰柜的质量检测系统。
The analyzer was composed of a multi plate probe and a computer controlled measurement system.
离子能量自动分析器由多极型探头和计算机控制的测量系统组成。
The developed TF-A device is a system for computer controlled automatic split charging of radioisotopes.
研制的TF—A设备是用计算机控制的同位素自动分装系统。
S. G. iron mould platens and toggles after cutting by computer controlled machine, form precious clamping unit.
球墨铸铁模板及机铰经电脑机床加工，组成精密锁模系统；
A computer controlled magnetic particle brake simulated loading system was developed for agricultural machinery experiments.
为了进行室内模拟加载，研制了一套计算机控制的磁粉制动器模拟加载系统。
A computer controlled intelligent measurement and data acquisition system for piezoelectric crystal sensor array was studied.
研究了一种利用微机控制测量和采集压电晶体传感器阵列振荡频率的智能型仪器。
In this paper the computer controlled testing system is developed on basis of the small simulated testing bed of whirling vibration.
在设计研制轴系回旋振动模拟小平台的基础上，开发了以计算机为中心的测试分析系统。
The diamond bit design expert system and the computer controlled system for the bit production are described with their USES in production.
介绍了金刚石钻头设计的专家系统和钻头制造的微机自动控制系统，以及在生产中使用的情况。
A single chip computer controlled error compensating system USES digital display of inductosyn to compensate errors of scaled zero position.
介绍一种由单片机控制的误差补偿系统，利用感应同步器数显装置对定尺零位误差进行补偿。
Aiming at solving existing problems for the conventional mechanical close gear test platform, a computer controlled hydraulic loading system is designed.
针对传统的机械闭式齿轮试验台存在的问题，设计了一种计算机控制液压加载系统。
The measuring principle, system composition and measuring error analysis of the computer controlled step shaft multi parameters on line measuring system are introduced.
介绍了微机控制的阶梯轴多参数在线测量系统的测量原理、系统构成及测量误差分析。
A micro - computer controlled atmosphere - simulating system has been used to study the exhaust emission characteristics of diesel engine running in different altitude regions.
采用微机控制的大气模拟综合测控系统深入研究了柴油机运行在不同海拔地区的排放特性。
The principle, mathematical model, system software of a hydraulic excavator with micro computer controlled digging movement and it's bench test results are introduced in this paper.
本文介绍用微机控制液压挖掘机作业运动的原理、控制模型、系统软件以及试验台试验结果。
With the help of precise driving system of sensor measuring and single chip micro-computer controlled step motor, enabled the cart to move flexibly in narrow aisles of the storehouse.
借助传感器测定和单片机控制步进电机的精密驱动系统，使得自动搬运车能在狭小的仓库过道中灵活行进。
A method is developed for correcting the accuracy of non rotating and aspherical lens by controlling the pressure of the polishing die during computer controlled optical surfacing (CCOS).
为提高自由曲面型面加工精度，提出了在计算机控制光学表面成型工艺中基于压力控制的抛光修正方法。
Computer controlled hoists are widely used for material conveying in the advanced production system.
计算机控制的抓钩被广泛地用于先进制造系统中的材料搬运。
The platform is lowered into the garage, and it is then transported to a vacant parking space by a computer-controlled device similar to an elevator that also runs sideways.
平台降入车库，然后由计算机控制的像电梯一样横向运行的装置将其运送到一个空闲的停车位。
This nuclear power plant which is completely automated and computer-controlled serves the entire city.
这个全自动化和电脑控制的核电厂供应全市的用电。
The practical benefit and feasibility of the computer-controlled truck dispatching system in Qidashan Iron Mine is analysed with the simulation results of the real-time dispatching models developed.
利用研制的实时调度模型的模拟结果，分析了计算机控制卡车调度系统在齐大山铁矿的应用效益及其可行性。
应用推荐