The computer aided design method for dustproof water supply pipeline in mine is introduced, the structure and capability of the system are narrated.
指出煤矿井下防尘供水管网利用计算机进行辅助设计的现实，介绍了该系统的结构、功能及关键技术，具有良好的应用前。
This paper's aim is to combine computer technology for information management with IC fabrication and to study the design method of computer-aided management system of IC fabrication.
本文的目的是将计算机信息管理技术与IC制造工程相结合，探讨用于IC制造的计算机辅助管理系统的设计开发方法。
This method provides an useful tool for researching into Computer Aided Modeling, Analysis and Design (CAMAD) of digital fiber optic communication links.
此方法为数字光纤通信链路的计算机辅助建模、分析和设计(CAMAD)提供了一种有用的研究工具。
This paper introduces a method of Computer Aided Design of hydraulic component springs. This method avoids the traditional tedious try calculation.
本文提出一种液压元件弹簧的计算机辅助设计法，这种方法可避免传统的繁锁试算。
This method can be applied in the computer-aided design and analysis of arbitrary planar optical waveguide structures.
该方法可用于任意复杂结构的平面光波导的计算机辅助设计与分析。
This paper deals with the flexible fixture and its basic principle and method of computer aided design in flexible manufacturing cell or flexible manufacturing system.
本文叙述了柔性制造单元或系统中的柔性夹具及其计算机辅助设计的基本原理与方法。
This paper introduces a method of computer aided design on optimum acidproof property of enamel products by mathematical programming.
介绍一种用数学规划方法进行搪瓷产品耐酸性能最佳的计算机辅助设计方法。
This method can be used in road design to changed the contour lines and sidelines to the data files in order to use computer aided calculating and planing.
该方法还可用于公路规划设计中将地图中的等高线、边界线等转换为数据文件，便于使用计算机辅助计算、规划。
The article puts forward computer aided design (CAD) method used for a light flexural vibration of the ultrasonic spot welding machine.
该文提出了超波声点焊机轻型弯曲振动系统的CAD（计算机辅助设计）方法。
It is an available tool based on modern optimization method and computer program, resolving complex design problem. It is an important aspect on computer aided design (CAD).
它是建立在近代数学最优化方法和计算机程序之上，解决复杂设计问题的一种有效工具，是计算机辅助设计(CAD)应用中的一个重要方面。
Objective: To develop a new method of computer aided design (CAD) of veneer on maxillary incisor.
目的：尝试上颌中切牙贴面计算机辅助设计(CAD)方法。
The present paper aims at introducing to a computer aided design and optimization method for deeply submerged shapes in a viscous fluid under parallel inflow conditions.
本文旨在介绍应用计算机辅助优化寻求最小阻力流体形状的设计和研究方法。
In this paper, a method of using CAD (Computer Aided design) technology in the field of aircraft structure load design is discussed.
本文将计算机辅助设计技术引入飞机结构试验设计领域，对载荷设计自动化方法进行了研究。
Not only several design parameters can be modified at the same time, but also computer aided design programming can be simplified by using the above calculation method.
按此方法不仅可以同时调整若干设计参数，而且还可简化计算机辅助设计的程序。
In this paper, the design method and functions of computer-aided ceramics product construction design system is presented.
本文介绍了计算机辅助陶瓷产品造型设计系统的设计方法和主要功能。
Numerical results illustrate the method is an efficient computer aided optimal design method.
数值结果表明该方法是带筋支撑板有效的计算机辅助优化设计方法。
RF MEMS switch is designed by computer aided design (CAD) method.
应用计算机辅助设计(CAD)方法模拟设计一种射频微机械(RF - MEMS)开关。
In this paper, the method, which is called Computer Aided Perturbation (CAP), is used for the optimization design of the multi-stage microwave amplifier circuits.
采用机辅扰动法(CAP法)进行微波多级放大器电路的优化设计。
This paper reports a method to design a system for computer-aided image diagnosis and study.
本文探讨设计一套计算机化的影像辅助诊断教学系统的方法。
The deficiencies in current methods of cylinder design are studied and a new method for CAD software development-Computer-Aided-Design with varible structure is presented.
本文分析了目前液压缸设计方法的不足，提出了一种开发CAD软件的新方法——计算机辅助变结构设计方法。
An artificial intelligence method is proposed for carrying out computer-aided design of the Vee-ring. The graphs are automatically identified and processed throughout the procedure.
本文提出用一种人工智能的方法来进行精冲齿圈压板的计算机辅助设计。整个设计过程始终贯穿着对图形的自动识别和处理。
Computer aided design of steering clutch in the bulldozer based on three-dimensional design software MDT was studied in theories. And the realism significance of this method was discussed.
以三维设计软件MDT为平台，对推土机转向离合器的计算机辅助设计系统的构成和功能特点进行研究，并分析使用这种系统的现实意义。
The specialty of computer-aided art design is newly born, and so in the process of pursuing the greatest effectiveness from teaching exploration of teaching method becomes very important.
电脑美术设计专业是一门新兴的专业，在追求教学效益最大化的过程中，教学方法的探讨尤为重要。
This paper presents Vector Performance method, a method of computer-aided optimal design, which, according to the requirements of design, is applied to the optimal design of automatic control systems.
本文介绍了一种有效的便于工程应用的计算机辅助最优设计方法——质量向量法。
The paper gives a new method for computer aided process tolerance design which considers production cost and quality loss cost and assembly function requirements.
本文提出了考虑加工成本、质量损失成本、装配件的装配性能要求等的一种工序公差设计的新方法。
Above research can provide one method for computer aided cathode design.
论文提供了一种计算机辅助阴极工具设计方法。
A modern design method, by which computer aided optimum design is used through the whole process of roller bit design, is introduced in this article.
介绍一种牙轮钻头的现代设计方法。设计过程全部使用计算机辅助设计和优化设计。
Group contribution method can be used not only to estimate the properties of compounds, but also in computer-aided molecular design (CAMD).
利用基团贡献法可预测化合物的性质，还能用于化合物的计算机辅助分子设计(CAMD)。
The man-machine design problem in Computer Aided Industrial Design process was studied. The method which provides the three-dimensional digitization design subsystem was presented.
这篇文章讨论了计算机辅助工业设计过程中的人机设计问题，提出了一套完整的三维数字化人机设计子系统的构建想法。
The man-machine design problem in Computer Aided Industrial Design process was studied. The method which provides the three-dimensional digitization design subsystem was presented.
这篇文章讨论了计算机辅助工业设计过程中的人机设计问题，提出了一套完整的三维数字化人机设计子系统的构建想法。
应用推荐