The formulation of quantum devices model and its computational simulation have important significance of guidance.
量子器件模型的建立与计算机模拟对于实验有着重大的指导意义。
By optimizing the power of the ASK channel, formats combination of ASK and DPSK to DPASK signal is successfully demonstrated by computational simulation.
通过优化ask信道的功率，我们使用计算机仿真成功展示了ASK和DPSK信号到DPASK信号的码型组合。
By comparing the results of Taylor test and computational simulation, a validating and optimizing method on dynamic constitutive model material constants was proposed.
通过实验数据和数值模拟结果的对比，研究了泰勒杆实验在材料动态本构关系参数确认和优化方面的应用。
HPCMP was created in 1992 to boost the high-performance computational capabilities of the Defense Department, so more advanced simulation, testing and modeling work can be carried out by the agency.
HPCMP创立于1992年，是为了推进国防部的高性能计算能力，因此该机构能够承担更先进的模拟、测试和建模工作。
His team is using the simulation to try to understand the brain's high-level computational principles.
他的团队通常用这类模拟来理解大脑的高级计算规则。
Simulation results show the correctness and the effectiveness of the proposed method with low computational complexity and inflexibility to light intensity.
仿真结果表明该算法是正确和有效的，并且算法不受光照条件的影响，同时具有较低的计算复杂度。
This paper discussed the computational condition of Bingham fluid and the development of two-phase turbulent model, chose a model of pulp fibre suspensions, approached the scheme of the simulation.
本文分析了有关宾汉流体的计算及湍流两相流的现状，选择纸浆纤维悬浮液的研究模型，对其数值模拟进行了初探。
Aerodynamic characteristics and wind pressure distribution of vehicle-bridge coupled system is stud-ied based on numerical simulation by computational fluid dynamic method.
基于计算流体动力学，采用数值模拟的方法研究了车桥耦合体系气动力特性和风压分布。
Computational fluid Dynamics (CFD) is a kind of numerical simulation technology which studies fluid.
计算流体动力学(CFD)是一种以流体为研究对象的数值模拟技术。
Numerical simulation of the flow field of the standard fuel assembly in China Advanced Research Reactor is carried out by using computational fluid dynamics software CFX4.4 and CFX5.5.
采用计算流体力学软件CFX4.4和CFX5.5对中国先进研究堆标准燃料组件流场进行了数值模拟。
The simulation between computational structure mechanics and optimal control is expounded in this paper.
本文论述了计算结构力学与最优控制理论的模拟关系。
The statistic model of the dusting efficiency for the sedimentation chamber is established. The computational method of the computer simulation is introduced.
建立了沉降室除尘效率的统计模型，并介绍了计算机模拟计算的方法。
The results obtained could be referred in further study of computational theory of composite members, rational design of composite beams, and other similar numerical simulation.
所获分析结果对于促进叠合梁斜截面理论的深入研究、指导叠合梁在工程中的合理设计以及类似的数值模拟分析均有一定的参考价值。
Based on the computational fluid dynamics, a design method for flow meter is given through numerical simulation and experiment on metal tube rotameter with special structure fixed on the level piping.
通过对适合安装于水平管道的特殊结构的金属管浮子流量计三维湍流流场的数值仿真及实验研究提出一种基于计算流体力学的流量传感器设计方法。
To evaluate decentralized scheduling of parallel jobs on computational grids, the discrete event-based simulation system J3S is designed.
为评估计算网格上并行作业的无中心式调度，设计了基于离散事件的模拟系统J3S。
At the same time, use FLUENT computational fluid dynamics simulation software to optimize the structure of MAP reactor.
同时运用FLUENT计算流体力学模拟软件，模拟并优化了MAP反应器的结构。
Making use of computational fluid dynamics method and dynamic simulation, the thesis studies the effects of jet flow on launch process of vehicular container-type missile.
结合流场计算和发射动力学仿真，研究某型车载发射系统中燃气流对发射过程的影响。
The new algorithm is better than classical LMS that is verified by computer simulation of adaptive channel equalizer, while the computational amount is only increased slightly.
在计算机仿真自适应信道均衡中，该算法的性能明显优于传统的LMS算法，而计算量增加甚少。
On applying large eddy simulation (LES) to practical interest, the main difficulties were high requirement of numerical schemes and huge computational cost.
在将大涡模拟(LES)应用到工程实际时，面临着两个主要难点：LES对格式要求高和计算量大。
It first develops computational model for cabin thermal environment, and then makes corresponding numerical simulation.
文中首先对车室内的热环境建立了相应的计算模型，然后进行了相应的数值计算。
The basic idea is to save computational FE simulation cost by storing previously processed information along with the current against some pre-defined criteria.
其基本思想是节省计算铁仿真成本处理资讯储存之前随着目前免受一些预先定义的标准。
This paper presents the basic idea, concepts, and methods of computational experiments, and discusses issues related to computer simulation, observation and explanation based emergence.
本文提出计算实验方法的基本思想、概念和方法，并讨论计算仿真与计算实验的关系和异同之处，以及基于涌现的实验观察和解释方法。
Only a few studies were carried out on the numerical simulation of mixing process by using computational fluid dynamics (CFD).
国内外采用计算流体力学（CFD）对混合时间进行理论研究的文献相对较少。
To do just that, the researchers used a computational algorithm and molecular simulation to predict their new molecular form of frozen water.
为此，研究人员使用计算算法和分子模拟来预测冰的这种新分子形式。
In the direct numerical simulation of supersonic boundary layer flow, the outlet boundary condition will strongly effect the computational results.
在超声速边界层的计算中，出口处边界条件的好坏会影响计算结果。
The generalized Newtonian fluid models are commonly adopted in the numerical simulation for non-Newtonian fluid for their advantages of simpleness in form and low computational complexity.
阐述了广义牛顿流体模型形式简单、计算量低，在非牛顿流体搅拌流场数值模拟过程中应用广泛；
Computational results are consistent with experimental ones. It is shown that the simulation of the interior ballistic process is successful.
并将此内弹道模型应用到某小口径火炮内弹道数值模拟中，得到了与实验数据相符合的结果。
An algorithm used in numerical simulation along the boundary of a computational domain to absorb all energy incident upon that boundary and to suppress reflection artifacts.
指在数学模拟时沿计算区域边界的某种算法，目的是为了吸收进入这些边界的能量和压制人为产生的反射。
An algorithm used in numerical simulation along the boundary of a computational domain to absorb all energy incident upon that boundary and to suppress reflection artifacts.
指在数学模拟时沿计算区域边界的某种算法，目的是为了吸收进入这些边界的能量和压制人为产生的反射。
应用推荐